What is this product used for?
Creating a demountable connection between compatible pvc pipework and a female-threaded interface.
-
-
Commercial Products
Commercial Products
Professional Growing Media
Plant Nutrition
Plant Health
Sprayers & Protective Clothing
Pots, Planters & Trays
Propagation
Baskets & Planters
Fabrics & Netting
Environment
Plant Lighting
Irrigation
Plant Support & Tree Care
Equipment
Tools
Plant Labels
Packaging
Lawn Care
Clearance
-
Retail Products
Retail Products
Growing Media
Plant Nutrition
Plant Health
Pots, Planters & Tanks
Propagation
Baskets & Planters
Fabrics & Netting
Environment
Plant Lighting
Plant Support
Equipment
Tools
1993 products
1993 products
Sort by:
The PVC 63mm x 2" Female Threaded Union is designed for creating a demountable connection between compatible PVC pipework and a female-threaded interface in compatible professional irrigation and water-distribution installations.
Match PVC fittings by pipe diameter, thread size and connection type so the joint can be assembled without forcing incompatible components.
Key benefits
- Designed for creating a demountable connection between compatible PVC pipework and a female-threaded interface
- Product type: PVC Female Threaded Union
- Stated size/pack: 63mm x 2"
- For compatible professional irrigation installations
Building serviceable PVC connections
Use only with compatible PVC pipe and the stated thread or hose interface. Cut pipe squarely, deburr it and dry-fit the layout before permanent assembly.
For threaded joints, use a sealing method appropriate to the fitting and system and avoid excessive tightening that could damage plastic threads.
Installation & commissioning
Support pipework so fittings do not carry avoidable bending loads. Plan unions and service points where equipment may need to be removed later.
After the applicable assembly or curing process, commission gradually and inspect joints for leakage before routine operation.
Compatibility & maintenance
Confirm that pipe, fittings, adhesive and operating conditions are compatible with the intended system. Nominal dimensions alone do not establish pressure suitability.
Inspect accessible joints periodically and investigate leakage rather than relying on repeated tightening or temporary external sealing.
PVC 63mm x 2" Female Threaded Union product details
| Product type | PVC Female Threaded Union |
|---|---|
| Primary use | creating a demountable connection between compatible PVC pipework and a female-threaded interface |
| Stated size / pack | 63mm x 2" |
| Application | Compatible PVC irrigation and water-distribution systems |
PVC 63mm x 2" Female Threaded Union FAQs
What size or pack is this version?
The stated size/pack is 63mm x 2". How do I check compatibility?
Confirm pipe diameter, thread or hose interface, material and complete-system requirements before assembly. Should PVC pipe be cut squarely?
Yes. Clean square cuts and deburring help fittings seat correctly. Can I pressure-test immediately after assembly?
Follow the applicable fitting or adhesive manufacturer's curing and commissioning instructions. Can threaded plastic fittings be overtightened?
Yes. Excessive force can damage threads or fitting bodies. Should pipework be supported?
Yes. Support runs so fittings and unions are not subjected to unnecessary bending or weight. What should I do if a joint leaks?
Safely isolate the system and inspect the joint, sealing method and component condition.
The PVC 63mm x 2" Male Threaded Union is designed for creating a demountable connection between compatible PVC pipework and a male-threaded interface in compatible professional irrigation and water-distribution installations.
Match PVC fittings by pipe diameter, thread size and connection type so the joint can be assembled without forcing incompatible components.
Key benefits
- Designed for creating a demountable connection between compatible PVC pipework and a male-threaded interface
- Product type: PVC Male Threaded Union
- Stated size/pack: 63mm x 2"
- For compatible professional irrigation installations
Building serviceable PVC connections
Use only with compatible PVC pipe and the stated thread or hose interface. Cut pipe squarely, deburr it and dry-fit the layout before permanent assembly.
For threaded joints, use a sealing method appropriate to the fitting and system and avoid excessive tightening that could damage plastic threads.
Installation & commissioning
Support pipework so fittings do not carry avoidable bending loads. Plan unions and service points where equipment may need to be removed later.
After the applicable assembly or curing process, commission gradually and inspect joints for leakage before routine operation.
Compatibility & maintenance
Confirm that pipe, fittings, adhesive and operating conditions are compatible with the intended system. Nominal dimensions alone do not establish pressure suitability.
Inspect accessible joints periodically and investigate leakage rather than relying on repeated tightening or temporary external sealing.
PVC 63mm x 2" Male Threaded Union product details
| Product type | PVC Male Threaded Union |
|---|---|
| Primary use | creating a demountable connection between compatible PVC pipework and a male-threaded interface |
| Stated size / pack | 63mm x 2" |
| Application | Compatible PVC irrigation and water-distribution systems |
PVC 63mm x 2" Male Threaded Union FAQs
What is this product used for?
Creating a demountable connection between compatible pvc pipework and a male-threaded interface. What size or pack is this version?
The stated size/pack is 63mm x 2". How do I check compatibility?
Confirm pipe diameter, thread or hose interface, material and complete-system requirements before assembly. Should PVC pipe be cut squarely?
Yes. Clean square cuts and deburring help fittings seat correctly. Can I pressure-test immediately after assembly?
Follow the applicable fitting or adhesive manufacturer's curing and commissioning instructions. Can threaded plastic fittings be overtightened?
Yes. Excessive force can damage threads or fitting bodies. Should pipework be supported?
Yes. Support runs so fittings and unions are not subjected to unnecessary bending or weight. What should I do if a joint leaks?
Safely isolate the system and inspect the joint, sealing method and component condition.
The PVC 63mm x 2" x 63mm Male Branch Tee is designed for creating a branch with a male-threaded take-off in compatible professional PVC irrigation and water-distribution systems.
Correctly selected valves, tees, caps and sealing components make irrigation pipework easier to isolate, branch, terminate and maintain.
Key benefits
- Product type: PVC Male-Threaded Branch Tee
- Designed for creating a branch with a male-threaded take-off
- Dimensions and thread designations retained from the source specification
- For compatible professional PVC irrigation systems
Creating irrigation branches
Use the tee to create the stated branch arrangement in compatible PVC pipework. Equal tees maintain the same nominal pipe size through the branch, while reducing or threaded branch tees provide the specific transition stated in the product dimensions.
Adding a branch changes the downstream hydraulic demand, so consider total zone flow and pipe sizing as well as the physical connection.
Preparing PVC connections
Cut pipe squarely, remove burrs and clean the connection area. Dry-fit the layout before permanent assembly where practical so dimensions and alignment can be checked.
Use solvent-weld cleaner and adhesive compatible with the PVC system where required. For threaded connections, use a suitable sealing method and avoid excessive force on plastic threads.
Installation & pipe support
Support pipework so valves, tees and end fittings do not carry unnecessary pipe or water weight. Allow access around valves, unions and service points so future maintenance can be carried out without damaging adjacent components.
Commissioning & leak checks
After the applicable curing or assembly process, commission the system gradually. Inspect new joints, valve bodies and sealed ends for leakage before routine operation.
Maintenance
Inspect accessible components periodically for leaks, cracking, damaged seals or mechanical strain. Isolate the system before servicing and replace deteriorated sealing parts rather than relying on repeated overtightening.
PVC 63mm x 2" x 63mm Male Branch Tee product details
| Product type | PVC Male-Threaded Branch Tee |
|---|---|
| Primary use | creating a branch with a male-threaded take-off |
| Source size / designation | 63mm x 2" x 63mm Male Branch Tee |
| Application | Professional PVC irrigation and water-distribution systems |
PVC 63mm x 2" x 63mm Male Branch Tee FAQs
What is this product used for?
Creating a branch with a male-threaded take-off. How do I check the correct size?
Match every stated pipe diameter, thread and connection type to the components in the intended system. Can I force a fitting onto a different pipe size?
No. Use components specifically compatible with the stated dimensions and connection system. Should PVC pipe be prepared before assembly?
Yes. Cut pipe squarely, remove burrs and clean the joint area before assembly. Can threaded PVC fittings be overtightened?
Yes. Excessive force can damage plastic threads, caps or valve bodies. Should pipework be supported?
Yes. Support runs so valves, tees and end fittings are not carrying unnecessary pipe or water weight. When can a solvent-weld system be pressurised?
Follow the adhesive manufacturer's current curing and commissioning instructions rather than assuming a universal time. What should I do if a connection leaks?
Safely isolate the system and inspect the fitting, seal and assembly method rather than relying on temporary external sealing.
The PVC 63mm x 32mm Reducing Bush is designed for reducing between compatible PVC pipe sizes in professional PVC irrigation and water-distribution systems.
Correct fitting selection helps create serviceable pipe layouts without forcing incompatible diameters, threads or connection types.
Key benefits
- Product type: PVC Reducing Bush
- Designed for reducing between compatible PVC pipe sizes
- For compatible professional PVC irrigation systems
- Dimensions retained from source product specification
Reducing between connection sizes
Use the reducing fitting only for the stated compatible dimensions. Confirm whether each side is solvent-weld, threaded or otherwise connected before assembly, particularly where metric and threaded dimensions appear together.
Preparing PVC pipe & fittings
Cut pipe squarely, remove burrs and clean the joint area before assembly. Dry-fit the layout first where practical to confirm alignment and component selection.
For solvent-weld joints, use cleaner and adhesive compatible with the PVC system and follow the manufacturer's application and curing instructions. For threaded joints, use an appropriate sealing method and avoid excessive tightening.
Installation & commissioning
Support pipework so fittings do not carry avoidable bending loads. After the applicable curing or assembly process, commission the system gradually and inspect joints for leakage before routine crop use.
Pressure & compatibility
Nominal dimensions identify connection sizes but do not by themselves establish pressure rating or compatibility with every PVC system. Confirm the requirements of the complete installation before use.
Maintenance
Inspect accessible pipework and fittings periodically for leakage, movement, cracking or mechanical damage. Isolate and repair faults properly rather than relying on temporary external sealing.
PVC 63mm x 32mm Reducing Bush product details
| Product type | PVC Reducing Bush |
|---|---|
| Primary use | reducing between compatible PVC pipe sizes |
| Source dimensions / designation | 63mm x 32mm Reducing Bush |
| Application | Professional PVC irrigation and water-distribution systems |
PVC 63mm x 32mm Reducing Bush FAQs
What is this fitting used for?
Reducing between compatible pvc pipe sizes. How do I check the correct size?
Match every stated pipe diameter, thread and connection type to the components in the intended system. Should PVC pipe be cut squarely?
Yes. Square, deburred cuts help fittings seat correctly and support reliable joint preparation. Can I force a fitting onto a slightly different pipe size?
No. Use components specifically compatible with the stated dimensions and connection system. Should pipework be supported?
Yes. Support runs so fittings are not carrying unnecessary pipe or water weight. Can threaded PVC fittings be overtightened?
Yes. Excessive tightening can damage plastic threads or fitting bodies. When can a solvent-weld system be pressurised?
Follow the adhesive manufacturer's current curing and commissioning instructions rather than assuming a universal time. What should I do if a PVC joint leaks?
Safely isolate the system and inspect the joint, fitting and assembly method; repair it correctly rather than relying on a temporary external seal.
The PVC 63mm x 50mm Reducing Bush is designed for reducing between compatible PVC pipe sizes in professional PVC irrigation and water-distribution systems.
Correct fitting selection helps create serviceable pipe layouts without forcing incompatible diameters, threads or connection types.
Key benefits
- Product type: PVC Reducing Bush
- Designed for reducing between compatible PVC pipe sizes
- For compatible professional PVC irrigation systems
- Dimensions retained from source product specification
Reducing between connection sizes
Use the reducing fitting only for the stated compatible dimensions. Confirm whether each side is solvent-weld, threaded or otherwise connected before assembly, particularly where metric and threaded dimensions appear together.
Preparing PVC pipe & fittings
Cut pipe squarely, remove burrs and clean the joint area before assembly. Dry-fit the layout first where practical to confirm alignment and component selection.
For solvent-weld joints, use cleaner and adhesive compatible with the PVC system and follow the manufacturer's application and curing instructions. For threaded joints, use an appropriate sealing method and avoid excessive tightening.
Installation & commissioning
Support pipework so fittings do not carry avoidable bending loads. After the applicable curing or assembly process, commission the system gradually and inspect joints for leakage before routine crop use.
Pressure & compatibility
Nominal dimensions identify connection sizes but do not by themselves establish pressure rating or compatibility with every PVC system. Confirm the requirements of the complete installation before use.
Maintenance
Inspect accessible pipework and fittings periodically for leakage, movement, cracking or mechanical damage. Isolate and repair faults properly rather than relying on temporary external sealing.
PVC 63mm x 50mm Reducing Bush product details
| Product type | PVC Reducing Bush |
|---|---|
| Primary use | reducing between compatible PVC pipe sizes |
| Source dimensions / designation | 63mm x 50mm Reducing Bush |
| Application | Professional PVC irrigation and water-distribution systems |
PVC 63mm x 50mm Reducing Bush FAQs
What is this fitting used for?
Reducing between compatible pvc pipe sizes. How do I check the correct size?
Match every stated pipe diameter, thread and connection type to the components in the intended system. Should PVC pipe be cut squarely?
Yes. Square, deburred cuts help fittings seat correctly and support reliable joint preparation. Can I force a fitting onto a slightly different pipe size?
No. Use components specifically compatible with the stated dimensions and connection system. Should pipework be supported?
Yes. Support runs so fittings are not carrying unnecessary pipe or water weight. Can threaded PVC fittings be overtightened?
Yes. Excessive tightening can damage plastic threads or fitting bodies. When can a solvent-weld system be pressurised?
Follow the adhesive manufacturer's current curing and commissioning instructions rather than assuming a universal time. What should I do if a PVC joint leaks?
Safely isolate the system and inspect the joint, fitting and assembly method; repair it correctly rather than relying on a temporary external seal.
The PVC 63mm x 50mm x 63mm Reducing Tee is designed for creating a branch while reducing the branch connection size in compatible professional PVC irrigation and water-distribution systems.
Correctly selected valves, tees, caps and sealing components make irrigation pipework easier to isolate, branch, terminate and maintain.
Key benefits
- Product type: PVC Reducing Tee
- Designed for creating a branch while reducing the branch connection size
- Dimensions and thread designations retained from the source specification
- For compatible professional PVC irrigation systems
Creating irrigation branches
Use the tee to create the stated branch arrangement in compatible PVC pipework. Equal tees maintain the same nominal pipe size through the branch, while reducing or threaded branch tees provide the specific transition stated in the product dimensions.
Adding a branch changes the downstream hydraulic demand, so consider total zone flow and pipe sizing as well as the physical connection.
Preparing PVC connections
Cut pipe squarely, remove burrs and clean the connection area. Dry-fit the layout before permanent assembly where practical so dimensions and alignment can be checked.
Use solvent-weld cleaner and adhesive compatible with the PVC system where required. For threaded connections, use a suitable sealing method and avoid excessive force on plastic threads.
Installation & pipe support
Support pipework so valves, tees and end fittings do not carry unnecessary pipe or water weight. Allow access around valves, unions and service points so future maintenance can be carried out without damaging adjacent components.
Commissioning & leak checks
After the applicable curing or assembly process, commission the system gradually. Inspect new joints, valve bodies and sealed ends for leakage before routine operation.
Maintenance
Inspect accessible components periodically for leaks, cracking, damaged seals or mechanical strain. Isolate the system before servicing and replace deteriorated sealing parts rather than relying on repeated overtightening.
PVC 63mm x 50mm x 63mm Reducing Tee product details
| Product type | PVC Reducing Tee |
|---|---|
| Primary use | creating a branch while reducing the branch connection size |
| Source size / designation | 63mm x 50mm x 63mm Reducing Tee |
| Application | Professional PVC irrigation and water-distribution systems |
PVC 63mm x 50mm x 63mm Reducing Tee FAQs
What is this product used for?
Creating a branch while reducing the branch connection size. How do I check the correct size?
Match every stated pipe diameter, thread and connection type to the components in the intended system. Can I force a fitting onto a different pipe size?
No. Use components specifically compatible with the stated dimensions and connection system. Should PVC pipe be prepared before assembly?
Yes. Cut pipe squarely, remove burrs and clean the joint area before assembly. Can threaded PVC fittings be overtightened?
Yes. Excessive force can damage plastic threads, caps or valve bodies. Should pipework be supported?
Yes. Support runs so valves, tees and end fittings are not carrying unnecessary pipe or water weight. When can a solvent-weld system be pressurised?
Follow the adhesive manufacturer's current curing and commissioning instructions rather than assuming a universal time. What should I do if a connection leaks?
Safely isolate the system and inspect the fitting, seal and assembly method rather than relying on temporary external sealing.
The PVC 63mm x 63mm 45° Elbow is designed for changing pipe direction by 45 degrees in professional PVC irrigation and water-distribution systems.
Correct fitting selection helps create serviceable pipe layouts without forcing incompatible diameters, threads or connection types.
Key benefits
- Product type: PVC 45° Elbow
- Designed for changing pipe direction by 45 degrees
- For compatible professional PVC irrigation systems
- Dimensions retained from source product specification
Changing pipe direction
Use the elbow to create the stated change of direction without forcing straight pipe into an excessively tight bend. Align both pipe runs before permanent assembly so the fitting is not left under continuous side load.
Preparing PVC pipe & fittings
Cut pipe squarely, remove burrs and clean the joint area before assembly. Dry-fit the layout first where practical to confirm alignment and component selection.
For solvent-weld joints, use cleaner and adhesive compatible with the PVC system and follow the manufacturer's application and curing instructions. For threaded joints, use an appropriate sealing method and avoid excessive tightening.
Installation & commissioning
Support pipework so fittings do not carry avoidable bending loads. After the applicable curing or assembly process, commission the system gradually and inspect joints for leakage before routine crop use.
Pressure & compatibility
Nominal dimensions identify connection sizes but do not by themselves establish pressure rating or compatibility with every PVC system. Confirm the requirements of the complete installation before use.
Maintenance
Inspect accessible pipework and fittings periodically for leakage, movement, cracking or mechanical damage. Isolate and repair faults properly rather than relying on temporary external sealing.
PVC 63mm x 63mm 45° Elbow product details
| Product type | PVC 45° Elbow |
|---|---|
| Primary use | changing pipe direction by 45 degrees |
| Source dimensions / designation | 63mm x 63mm 45° Elbow |
| Application | Professional PVC irrigation and water-distribution systems |
PVC 63mm x 63mm 45° Elbow FAQs
What is this fitting used for?
Changing pipe direction by 45 degrees. How do I check the correct size?
Match every stated pipe diameter, thread and connection type to the components in the intended system. Should PVC pipe be cut squarely?
Yes. Square, deburred cuts help fittings seat correctly and support reliable joint preparation. Can I force a fitting onto a slightly different pipe size?
No. Use components specifically compatible with the stated dimensions and connection system. Should pipework be supported?
Yes. Support runs so fittings are not carrying unnecessary pipe or water weight. Can threaded PVC fittings be overtightened?
Yes. Excessive tightening can damage plastic threads or fitting bodies. When can a solvent-weld system be pressurised?
Follow the adhesive manufacturer's current curing and commissioning instructions rather than assuming a universal time. What should I do if a PVC joint leaks?
Safely isolate the system and inspect the joint, fitting and assembly method; repair it correctly rather than relying on a temporary external seal.
The PVC 63mm x 63mm 90° Elbow is designed for changing pipe direction by 90 degrees in professional PVC irrigation and water-distribution systems.
Correct fitting selection helps create serviceable pipe layouts without forcing incompatible diameters, threads or connection types.
Key benefits
- Product type: PVC 90° Elbow
- Designed for changing pipe direction by 90 degrees
- For compatible professional PVC irrigation systems
- Dimensions retained from source product specification
Changing pipe direction
Use the elbow to create the stated change of direction without forcing straight pipe into an excessively tight bend. Align both pipe runs before permanent assembly so the fitting is not left under continuous side load.
Preparing PVC pipe & fittings
Cut pipe squarely, remove burrs and clean the joint area before assembly. Dry-fit the layout first where practical to confirm alignment and component selection.
For solvent-weld joints, use cleaner and adhesive compatible with the PVC system and follow the manufacturer's application and curing instructions. For threaded joints, use an appropriate sealing method and avoid excessive tightening.
Installation & commissioning
Support pipework so fittings do not carry avoidable bending loads. After the applicable curing or assembly process, commission the system gradually and inspect joints for leakage before routine crop use.
Pressure & compatibility
Nominal dimensions identify connection sizes but do not by themselves establish pressure rating or compatibility with every PVC system. Confirm the requirements of the complete installation before use.
Maintenance
Inspect accessible pipework and fittings periodically for leakage, movement, cracking or mechanical damage. Isolate and repair faults properly rather than relying on temporary external sealing.
PVC 63mm x 63mm 90° Elbow product details
| Product type | PVC 90° Elbow |
|---|---|
| Primary use | changing pipe direction by 90 degrees |
| Source dimensions / designation | 63mm x 63mm 90° Elbow |
| Application | Professional PVC irrigation and water-distribution systems |
PVC 63mm x 63mm 90° Elbow FAQs
What is this fitting used for?
Changing pipe direction by 90 degrees. How do I check the correct size?
Match every stated pipe diameter, thread and connection type to the components in the intended system. Should PVC pipe be cut squarely?
Yes. Square, deburred cuts help fittings seat correctly and support reliable joint preparation. Can I force a fitting onto a slightly different pipe size?
No. Use components specifically compatible with the stated dimensions and connection system. Should pipework be supported?
Yes. Support runs so fittings are not carrying unnecessary pipe or water weight. Can threaded PVC fittings be overtightened?
Yes. Excessive tightening can damage plastic threads or fitting bodies. When can a solvent-weld system be pressurised?
Follow the adhesive manufacturer's current curing and commissioning instructions rather than assuming a universal time. What should I do if a PVC joint leaks?
Safely isolate the system and inspect the joint, fitting and assembly method; repair it correctly rather than relying on a temporary external seal.
The PVC 63mm x 63mm x 63mm Equal Tee is designed for creating an equal-size branch in compatible PVC pipework in compatible professional PVC irrigation and water-distribution systems.
Correctly selected valves, tees, caps and sealing components make irrigation pipework easier to isolate, branch, terminate and maintain.
Key benefits
- Product type: PVC Equal Tee
- Designed for creating an equal-size branch in compatible PVC pipework
- Dimensions and thread designations retained from the source specification
- For compatible professional PVC irrigation systems
Creating irrigation branches
Use the tee to create the stated branch arrangement in compatible PVC pipework. Equal tees maintain the same nominal pipe size through the branch, while reducing or threaded branch tees provide the specific transition stated in the product dimensions.
Adding a branch changes the downstream hydraulic demand, so consider total zone flow and pipe sizing as well as the physical connection.
Preparing PVC connections
Cut pipe squarely, remove burrs and clean the connection area. Dry-fit the layout before permanent assembly where practical so dimensions and alignment can be checked.
Use solvent-weld cleaner and adhesive compatible with the PVC system where required. For threaded connections, use a suitable sealing method and avoid excessive force on plastic threads.
Installation & pipe support
Support pipework so valves, tees and end fittings do not carry unnecessary pipe or water weight. Allow access around valves, unions and service points so future maintenance can be carried out without damaging adjacent components.
Commissioning & leak checks
After the applicable curing or assembly process, commission the system gradually. Inspect new joints, valve bodies and sealed ends for leakage before routine operation.
Maintenance
Inspect accessible components periodically for leaks, cracking, damaged seals or mechanical strain. Isolate the system before servicing and replace deteriorated sealing parts rather than relying on repeated overtightening.
PVC 63mm x 63mm x 63mm Equal Tee product details
| Product type | PVC Equal Tee |
|---|---|
| Primary use | creating an equal-size branch in compatible PVC pipework |
| Source size / designation | 63mm x 63mm x 63mm Equal Tee |
| Application | Professional PVC irrigation and water-distribution systems |
PVC 63mm x 63mm x 63mm Equal Tee FAQs
What is this product used for?
Creating an equal-size branch in compatible pvc pipework. How do I check the correct size?
Match every stated pipe diameter, thread and connection type to the components in the intended system. Can I force a fitting onto a different pipe size?
No. Use components specifically compatible with the stated dimensions and connection system. Should PVC pipe be prepared before assembly?
Yes. Cut pipe squarely, remove burrs and clean the joint area before assembly. Can threaded PVC fittings be overtightened?
Yes. Excessive force can damage plastic threads, caps or valve bodies. Should pipework be supported?
Yes. Support runs so valves, tees and end fittings are not carrying unnecessary pipe or water weight. When can a solvent-weld system be pressurised?
Follow the adhesive manufacturer's current curing and commissioning instructions rather than assuming a universal time. What should I do if a connection leaks?
Safely isolate the system and inspect the fitting, seal and assembly method rather than relying on temporary external sealing.
The PVC 75mm x 63mm Reducing Bush is designed for reducing between compatible PVC pipe sizes in professional PVC irrigation and water-distribution systems.
Correct fitting selection helps create serviceable pipe layouts without forcing incompatible diameters, threads or connection types.
Key benefits
- Product type: PVC Reducing Bush
- Designed for reducing between compatible PVC pipe sizes
- For compatible professional PVC irrigation systems
- Dimensions retained from source product specification
Reducing between connection sizes
Use the reducing fitting only for the stated compatible dimensions. Confirm whether each side is solvent-weld, threaded or otherwise connected before assembly, particularly where metric and threaded dimensions appear together.
Preparing PVC pipe & fittings
Cut pipe squarely, remove burrs and clean the joint area before assembly. Dry-fit the layout first where practical to confirm alignment and component selection.
For solvent-weld joints, use cleaner and adhesive compatible with the PVC system and follow the manufacturer's application and curing instructions. For threaded joints, use an appropriate sealing method and avoid excessive tightening.
Installation & commissioning
Support pipework so fittings do not carry avoidable bending loads. After the applicable curing or assembly process, commission the system gradually and inspect joints for leakage before routine crop use.
Pressure & compatibility
Nominal dimensions identify connection sizes but do not by themselves establish pressure rating or compatibility with every PVC system. Confirm the requirements of the complete installation before use.
Maintenance
Inspect accessible pipework and fittings periodically for leakage, movement, cracking or mechanical damage. Isolate and repair faults properly rather than relying on temporary external sealing.
PVC 75mm x 63mm Reducing Bush product details
| Product type | PVC Reducing Bush |
|---|---|
| Primary use | reducing between compatible PVC pipe sizes |
| Source dimensions / designation | 75mm x 63mm Reducing Bush |
| Application | Professional PVC irrigation and water-distribution systems |
PVC 75mm x 63mm Reducing Bush FAQs
What is this fitting used for?
Reducing between compatible pvc pipe sizes. How do I check the correct size?
Match every stated pipe diameter, thread and connection type to the components in the intended system. Should PVC pipe be cut squarely?
Yes. Square, deburred cuts help fittings seat correctly and support reliable joint preparation. Can I force a fitting onto a slightly different pipe size?
No. Use components specifically compatible with the stated dimensions and connection system. Should pipework be supported?
Yes. Support runs so fittings are not carrying unnecessary pipe or water weight. Can threaded PVC fittings be overtightened?
Yes. Excessive tightening can damage plastic threads or fitting bodies. When can a solvent-weld system be pressurised?
Follow the adhesive manufacturer's current curing and commissioning instructions rather than assuming a universal time. What should I do if a PVC joint leaks?
Safely isolate the system and inspect the joint, fitting and assembly method; repair it correctly rather than relying on a temporary external seal.
The PVC 75mm x 63mm x 75mm Reducing Tee is designed for creating a branch while reducing the branch connection size in compatible professional PVC irrigation and water-distribution systems.
Correctly selected valves, tees, caps and sealing components make irrigation pipework easier to isolate, branch, terminate and maintain.
Key benefits
- Product type: PVC Reducing Tee
- Designed for creating a branch while reducing the branch connection size
- Dimensions and thread designations retained from the source specification
- For compatible professional PVC irrigation systems
Creating irrigation branches
Use the tee to create the stated branch arrangement in compatible PVC pipework. Equal tees maintain the same nominal pipe size through the branch, while reducing or threaded branch tees provide the specific transition stated in the product dimensions.
Adding a branch changes the downstream hydraulic demand, so consider total zone flow and pipe sizing as well as the physical connection.
Preparing PVC connections
Cut pipe squarely, remove burrs and clean the connection area. Dry-fit the layout before permanent assembly where practical so dimensions and alignment can be checked.
Use solvent-weld cleaner and adhesive compatible with the PVC system where required. For threaded connections, use a suitable sealing method and avoid excessive force on plastic threads.
Installation & pipe support
Support pipework so valves, tees and end fittings do not carry unnecessary pipe or water weight. Allow access around valves, unions and service points so future maintenance can be carried out without damaging adjacent components.
Commissioning & leak checks
After the applicable curing or assembly process, commission the system gradually. Inspect new joints, valve bodies and sealed ends for leakage before routine operation.
Maintenance
Inspect accessible components periodically for leaks, cracking, damaged seals or mechanical strain. Isolate the system before servicing and replace deteriorated sealing parts rather than relying on repeated overtightening.
PVC 75mm x 63mm x 75mm Reducing Tee product details
| Product type | PVC Reducing Tee |
|---|---|
| Primary use | creating a branch while reducing the branch connection size |
| Source size / designation | 75mm x 63mm x 75mm Reducing Tee |
| Application | Professional PVC irrigation and water-distribution systems |
PVC 75mm x 63mm x 75mm Reducing Tee FAQs
What is this product used for?
Creating a branch while reducing the branch connection size. How do I check the correct size?
Match every stated pipe diameter, thread and connection type to the components in the intended system. Can I force a fitting onto a different pipe size?
No. Use components specifically compatible with the stated dimensions and connection system. Should PVC pipe be prepared before assembly?
Yes. Cut pipe squarely, remove burrs and clean the joint area before assembly. Can threaded PVC fittings be overtightened?
Yes. Excessive force can damage plastic threads, caps or valve bodies. Should pipework be supported?
Yes. Support runs so valves, tees and end fittings are not carrying unnecessary pipe or water weight. When can a solvent-weld system be pressurised?
Follow the adhesive manufacturer's current curing and commissioning instructions rather than assuming a universal time. What should I do if a connection leaks?
Safely isolate the system and inspect the fitting, seal and assembly method rather than relying on temporary external sealing.
The PVC Pipe Solid 20mm x 4m - 10 bar is designed for forming rigid pressure-rated irrigation and water-distribution pipe runs in compatible professional PVC irrigation and water-distribution systems.
Correct pipe and adaptor selection helps maintain clean alignment, serviceability and reliable connections throughout fixed irrigation installations.
Key benefits
- Product type: 10 Bar Solid PVC Pressure Pipe
- Designed for forming rigid pressure-rated irrigation and water-distribution pipe runs
- Dimensions retained from source specification
- For compatible professional PVC irrigation systems
- Stated pressure rating: 10 bar
Rigid pressure pipe for irrigation mains
Use solid PVC pressure pipe for compatible fixed irrigation runs where its diameter and stated pressure class suit the hydraulic design. Pipe diameter affects velocity and pressure loss, so size the line for the required flow rather than choosing solely by connection availability.
Support long runs appropriately and allow for changes in direction, service points and equipment connections before cutting pipe.
Pipe preparation & solvent welding
Cut PVC pipe squarely, remove burrs and clean the mating surfaces. Dry-fit the layout where practical before applying compatible cleaner and adhesive.
Follow the adhesive manufacturer's current application and curing instructions. Do not assume one curing time is suitable for every pipe diameter, temperature or installation condition.
Supporting the installation
Support rigid pipework at suitable intervals and around valves, unions and heavy equipment. Avoid transferring mechanical strain into threaded adaptors or solvent-weld joints.
Commissioning & pressure checks
After the applicable curing period, commission the system gradually and inspect joints for leakage. Operating pressure must remain within the requirements of every component in the complete system, not simply the pipe itself.
Maintenance
Inspect accessible pipe and fittings periodically for leakage, movement, impact damage or cracking. Isolate the system before servicing and repair faults using compatible components and proper joint preparation.
PVC Pipe Solid 20mm x 4m - 10 bar product details
| Product type | 10 Bar Solid PVC Pressure Pipe |
|---|---|
| Source dimensions / designation | Pipe Solid 20mm x 4m - 10 bar |
| Primary use | forming rigid pressure-rated irrigation and water-distribution pipe runs |
| Application | Professional PVC irrigation and water-distribution systems |
| Stated pressure rating | 10 bar |
PVC Pipe Solid 20mm x 4m - 10 bar FAQs
What is this product used for?
Forming rigid pressure-rated irrigation and water-distribution pipe runs. How do I check the correct size?
Match every stated pipe diameter, thread and connection type to the intended system. Should PVC pipe be cut squarely?
Yes. Square, deburred cuts help fittings seat correctly and support reliable solvent-weld preparation. Can I force an adaptor onto a different size?
No. Use components specifically compatible with the stated dimensions and thread type. Should rigid PVC pipe be supported?
Yes. Support runs so joints and equipment connections are not carrying avoidable mechanical loads. When can a solvent-weld system be pressurised?
Follow the adhesive manufacturer's current curing and commissioning instructions. Does pipe diameter affect irrigation performance?
Yes. Diameter, run length and flow affect water velocity and pressure loss through the system. What should I do if a joint leaks?
Safely isolate the system and repair the joint correctly rather than relying on temporary external sealing. What pressure rating is stated?
The source product specification states 10 bar; the complete installation must still remain within the rating of its lowest-rated component.
The PVC Pipe Solid 32mm x 5m - 10 bar is designed for forming rigid pressure-rated irrigation and water-distribution pipe runs in compatible professional PVC irrigation and water-distribution systems.
Correct pipe and adaptor selection helps maintain clean alignment, serviceability and reliable connections throughout fixed irrigation installations.
Key benefits
- Product type: 10 Bar Solid PVC Pressure Pipe
- Designed for forming rigid pressure-rated irrigation and water-distribution pipe runs
- Dimensions retained from source specification
- For compatible professional PVC irrigation systems
- Stated pressure rating: 10 bar
Rigid pressure pipe for irrigation mains
Use solid PVC pressure pipe for compatible fixed irrigation runs where its diameter and stated pressure class suit the hydraulic design. Pipe diameter affects velocity and pressure loss, so size the line for the required flow rather than choosing solely by connection availability.
Support long runs appropriately and allow for changes in direction, service points and equipment connections before cutting pipe.
Pipe preparation & solvent welding
Cut PVC pipe squarely, remove burrs and clean the mating surfaces. Dry-fit the layout where practical before applying compatible cleaner and adhesive.
Follow the adhesive manufacturer's current application and curing instructions. Do not assume one curing time is suitable for every pipe diameter, temperature or installation condition.
Supporting the installation
Support rigid pipework at suitable intervals and around valves, unions and heavy equipment. Avoid transferring mechanical strain into threaded adaptors or solvent-weld joints.
Commissioning & pressure checks
After the applicable curing period, commission the system gradually and inspect joints for leakage. Operating pressure must remain within the requirements of every component in the complete system, not simply the pipe itself.
Maintenance
Inspect accessible pipe and fittings periodically for leakage, movement, impact damage or cracking. Isolate the system before servicing and repair faults using compatible components and proper joint preparation.
PVC Pipe Solid 32mm x 5m - 10 bar product details
| Product type | 10 Bar Solid PVC Pressure Pipe |
|---|---|
| Source dimensions / designation | Pipe Solid 32mm x 5m - 10 bar |
| Primary use | forming rigid pressure-rated irrigation and water-distribution pipe runs |
| Application | Professional PVC irrigation and water-distribution systems |
| Stated pressure rating | 10 bar |
PVC Pipe Solid 32mm x 5m - 10 bar FAQs
What is this product used for?
Forming rigid pressure-rated irrigation and water-distribution pipe runs. How do I check the correct size?
Match every stated pipe diameter, thread and connection type to the intended system. Should PVC pipe be cut squarely?
Yes. Square, deburred cuts help fittings seat correctly and support reliable solvent-weld preparation. Can I force an adaptor onto a different size?
No. Use components specifically compatible with the stated dimensions and thread type. Should rigid PVC pipe be supported?
Yes. Support runs so joints and equipment connections are not carrying avoidable mechanical loads. When can a solvent-weld system be pressurised?
Follow the adhesive manufacturer's current curing and commissioning instructions. Does pipe diameter affect irrigation performance?
Yes. Diameter, run length and flow affect water velocity and pressure loss through the system. What should I do if a joint leaks?
Safely isolate the system and repair the joint correctly rather than relying on temporary external sealing. What pressure rating is stated?
The source product specification states 10 bar; the complete installation must still remain within the rating of its lowest-rated component.
The PVC Pipe Solid 40mm x 5m - 10 bar is designed for forming rigid pressure-rated irrigation and water-distribution pipe runs in compatible professional PVC irrigation and water-distribution systems.
Correct pipe and adaptor selection helps maintain clean alignment, serviceability and reliable connections throughout fixed irrigation installations.
Key benefits
- Product type: 10 Bar Solid PVC Pressure Pipe
- Designed for forming rigid pressure-rated irrigation and water-distribution pipe runs
- Dimensions retained from source specification
- For compatible professional PVC irrigation systems
- Stated pressure rating: 10 bar
Rigid pressure pipe for irrigation mains
Use solid PVC pressure pipe for compatible fixed irrigation runs where its diameter and stated pressure class suit the hydraulic design. Pipe diameter affects velocity and pressure loss, so size the line for the required flow rather than choosing solely by connection availability.
Support long runs appropriately and allow for changes in direction, service points and equipment connections before cutting pipe.
Pipe preparation & solvent welding
Cut PVC pipe squarely, remove burrs and clean the mating surfaces. Dry-fit the layout where practical before applying compatible cleaner and adhesive.
Follow the adhesive manufacturer's current application and curing instructions. Do not assume one curing time is suitable for every pipe diameter, temperature or installation condition.
Supporting the installation
Support rigid pipework at suitable intervals and around valves, unions and heavy equipment. Avoid transferring mechanical strain into threaded adaptors or solvent-weld joints.
Commissioning & pressure checks
After the applicable curing period, commission the system gradually and inspect joints for leakage. Operating pressure must remain within the requirements of every component in the complete system, not simply the pipe itself.
Maintenance
Inspect accessible pipe and fittings periodically for leakage, movement, impact damage or cracking. Isolate the system before servicing and repair faults using compatible components and proper joint preparation.
PVC Pipe Solid 40mm x 5m - 10 bar product details
| Product type | 10 Bar Solid PVC Pressure Pipe |
|---|---|
| Source dimensions / designation | Pipe Solid 40mm x 5m - 10 bar |
| Primary use | forming rigid pressure-rated irrigation and water-distribution pipe runs |
| Application | Professional PVC irrigation and water-distribution systems |
| Stated pressure rating | 10 bar |
PVC Pipe Solid 40mm x 5m - 10 bar FAQs
What is this product used for?
Forming rigid pressure-rated irrigation and water-distribution pipe runs. How do I check the correct size?
Match every stated pipe diameter, thread and connection type to the intended system. Should PVC pipe be cut squarely?
Yes. Square, deburred cuts help fittings seat correctly and support reliable solvent-weld preparation. Can I force an adaptor onto a different size?
No. Use components specifically compatible with the stated dimensions and thread type. Should rigid PVC pipe be supported?
Yes. Support runs so joints and equipment connections are not carrying avoidable mechanical loads. When can a solvent-weld system be pressurised?
Follow the adhesive manufacturer's current curing and commissioning instructions. Does pipe diameter affect irrigation performance?
Yes. Diameter, run length and flow affect water velocity and pressure loss through the system. What should I do if a joint leaks?
Safely isolate the system and repair the joint correctly rather than relying on temporary external sealing. What pressure rating is stated?
The source product specification states 10 bar; the complete installation must still remain within the rating of its lowest-rated component.
The PVC Pipe Solid 50mm x 5m - 10 bar is designed for forming rigid pressure-rated irrigation and water-distribution pipe runs in compatible professional PVC irrigation and water-distribution systems.
Correct pipe and adaptor selection helps maintain clean alignment, serviceability and reliable connections throughout fixed irrigation installations.
Key benefits
- Product type: 10 Bar Solid PVC Pressure Pipe
- Designed for forming rigid pressure-rated irrigation and water-distribution pipe runs
- Dimensions retained from source specification
- For compatible professional PVC irrigation systems
- Stated pressure rating: 10 bar
Rigid pressure pipe for irrigation mains
Use solid PVC pressure pipe for compatible fixed irrigation runs where its diameter and stated pressure class suit the hydraulic design. Pipe diameter affects velocity and pressure loss, so size the line for the required flow rather than choosing solely by connection availability.
Support long runs appropriately and allow for changes in direction, service points and equipment connections before cutting pipe.
Pipe preparation & solvent welding
Cut PVC pipe squarely, remove burrs and clean the mating surfaces. Dry-fit the layout where practical before applying compatible cleaner and adhesive.
Follow the adhesive manufacturer's current application and curing instructions. Do not assume one curing time is suitable for every pipe diameter, temperature or installation condition.
Supporting the installation
Support rigid pipework at suitable intervals and around valves, unions and heavy equipment. Avoid transferring mechanical strain into threaded adaptors or solvent-weld joints.
Commissioning & pressure checks
After the applicable curing period, commission the system gradually and inspect joints for leakage. Operating pressure must remain within the requirements of every component in the complete system, not simply the pipe itself.
Maintenance
Inspect accessible pipe and fittings periodically for leakage, movement, impact damage or cracking. Isolate the system before servicing and repair faults using compatible components and proper joint preparation.
PVC Pipe Solid 50mm x 5m - 10 bar product details
| Product type | 10 Bar Solid PVC Pressure Pipe |
|---|---|
| Source dimensions / designation | Pipe Solid 50mm x 5m - 10 bar |
| Primary use | forming rigid pressure-rated irrigation and water-distribution pipe runs |
| Application | Professional PVC irrigation and water-distribution systems |
| Stated pressure rating | 10 bar |
PVC Pipe Solid 50mm x 5m - 10 bar FAQs
What is this product used for?
Forming rigid pressure-rated irrigation and water-distribution pipe runs. How do I check the correct size?
Match every stated pipe diameter, thread and connection type to the intended system. Should PVC pipe be cut squarely?
Yes. Square, deburred cuts help fittings seat correctly and support reliable solvent-weld preparation. Can I force an adaptor onto a different size?
No. Use components specifically compatible with the stated dimensions and thread type. Should rigid PVC pipe be supported?
Yes. Support runs so joints and equipment connections are not carrying avoidable mechanical loads. When can a solvent-weld system be pressurised?
Follow the adhesive manufacturer's current curing and commissioning instructions. Does pipe diameter affect irrigation performance?
Yes. Diameter, run length and flow affect water velocity and pressure loss through the system. What should I do if a joint leaks?
Safely isolate the system and repair the joint correctly rather than relying on temporary external sealing. What pressure rating is stated?
The source product specification states 10 bar; the complete installation must still remain within the rating of its lowest-rated component.
The PVC Pipe Solid 63mm x 5m - 10 bar is designed for forming rigid pressure-rated irrigation and water-distribution pipe runs in compatible professional PVC irrigation and water-distribution systems.
Correct pipe and adaptor selection helps maintain clean alignment, serviceability and reliable connections throughout fixed irrigation installations.
Key benefits
- Product type: 10 Bar Solid PVC Pressure Pipe
- Designed for forming rigid pressure-rated irrigation and water-distribution pipe runs
- Dimensions retained from source specification
- For compatible professional PVC irrigation systems
- Stated pressure rating: 10 bar
Rigid pressure pipe for irrigation mains
Use solid PVC pressure pipe for compatible fixed irrigation runs where its diameter and stated pressure class suit the hydraulic design. Pipe diameter affects velocity and pressure loss, so size the line for the required flow rather than choosing solely by connection availability.
Support long runs appropriately and allow for changes in direction, service points and equipment connections before cutting pipe.
Pipe preparation & solvent welding
Cut PVC pipe squarely, remove burrs and clean the mating surfaces. Dry-fit the layout where practical before applying compatible cleaner and adhesive.
Follow the adhesive manufacturer's current application and curing instructions. Do not assume one curing time is suitable for every pipe diameter, temperature or installation condition.
Supporting the installation
Support rigid pipework at suitable intervals and around valves, unions and heavy equipment. Avoid transferring mechanical strain into threaded adaptors or solvent-weld joints.
Commissioning & pressure checks
After the applicable curing period, commission the system gradually and inspect joints for leakage. Operating pressure must remain within the requirements of every component in the complete system, not simply the pipe itself.
Maintenance
Inspect accessible pipe and fittings periodically for leakage, movement, impact damage or cracking. Isolate the system before servicing and repair faults using compatible components and proper joint preparation.
PVC Pipe Solid 63mm x 5m - 10 bar product details
| Product type | 10 Bar Solid PVC Pressure Pipe |
|---|---|
| Source dimensions / designation | Pipe Solid 63mm x 5m - 10 bar |
| Primary use | forming rigid pressure-rated irrigation and water-distribution pipe runs |
| Application | Professional PVC irrigation and water-distribution systems |
| Stated pressure rating | 10 bar |
PVC Pipe Solid 63mm x 5m - 10 bar FAQs
What is this product used for?
Forming rigid pressure-rated irrigation and water-distribution pipe runs. How do I check the correct size?
Match every stated pipe diameter, thread and connection type to the intended system. Should PVC pipe be cut squarely?
Yes. Square, deburred cuts help fittings seat correctly and support reliable solvent-weld preparation. Can I force an adaptor onto a different size?
No. Use components specifically compatible with the stated dimensions and thread type. Should rigid PVC pipe be supported?
Yes. Support runs so joints and equipment connections are not carrying avoidable mechanical loads. When can a solvent-weld system be pressurised?
Follow the adhesive manufacturer's current curing and commissioning instructions. Does pipe diameter affect irrigation performance?
Yes. Diameter, run length and flow affect water velocity and pressure loss through the system. What should I do if a joint leaks?
Safely isolate the system and repair the joint correctly rather than relying on temporary external sealing. What pressure rating is stated?
The source product specification states 10 bar; the complete installation must still remain within the rating of its lowest-rated component.
The PVC Reducing Socket - 40/32mm x 20mm is designed for joining compatible PVC pipe sizes while reducing diameter in compatible professional PVC irrigation and water-distribution systems.
Correct pipe and adaptor selection helps maintain clean alignment, serviceability and reliable connections throughout fixed irrigation installations.
Key benefits
- Product type: PVC Reducing Socket
- Designed for joining compatible PVC pipe sizes while reducing diameter
- Dimensions retained from source specification
- For compatible professional PVC irrigation systems
Reducing pipe diameter
Use the reducing socket to transition between the stated compatible PVC diameters. A reduction changes downstream velocity and pressure-loss characteristics, so consider the hydraulic effect as well as the physical fit.
Pipe preparation & solvent welding
Cut PVC pipe squarely, remove burrs and clean the mating surfaces. Dry-fit the layout where practical before applying compatible cleaner and adhesive.
Follow the adhesive manufacturer's current application and curing instructions. Do not assume one curing time is suitable for every pipe diameter, temperature or installation condition.
Supporting the installation
Support rigid pipework at suitable intervals and around valves, unions and heavy equipment. Avoid transferring mechanical strain into threaded adaptors or solvent-weld joints.
Commissioning & pressure checks
After the applicable curing period, commission the system gradually and inspect joints for leakage. Operating pressure must remain within the requirements of every component in the complete system, not simply the pipe itself.
Maintenance
Inspect accessible pipe and fittings periodically for leakage, movement, impact damage or cracking. Isolate the system before servicing and repair faults using compatible components and proper joint preparation.
PVC Reducing Socket - 40/32mm x 20mm product details
| Product type | PVC Reducing Socket |
|---|---|
| Source dimensions / designation | Reducing Socket - 40/32mm x 20mm |
| Primary use | joining compatible PVC pipe sizes while reducing diameter |
| Application | Professional PVC irrigation and water-distribution systems |
PVC Reducing Socket - 40/32mm x 20mm FAQs
What is this product used for?
Joining compatible pvc pipe sizes while reducing diameter. How do I check the correct size?
Match every stated pipe diameter, thread and connection type to the intended system. Should PVC pipe be cut squarely?
Yes. Square, deburred cuts help fittings seat correctly and support reliable solvent-weld preparation. Can I force an adaptor onto a different size?
No. Use components specifically compatible with the stated dimensions and thread type. Should rigid PVC pipe be supported?
Yes. Support runs so joints and equipment connections are not carrying avoidable mechanical loads. When can a solvent-weld system be pressurised?
Follow the adhesive manufacturer's current curing and commissioning instructions. Does pipe diameter affect irrigation performance?
Yes. Diameter, run length and flow affect water velocity and pressure loss through the system. What should I do if a joint leaks?
Safely isolate the system and repair the joint correctly rather than relying on temporary external sealing.
The PVC Reducing Socket - 50/40mm x 32mm is designed for joining compatible PVC pipe sizes while reducing diameter in compatible professional PVC irrigation and water-distribution systems.
Correct pipe and adaptor selection helps maintain clean alignment, serviceability and reliable connections throughout fixed irrigation installations.
Key benefits
- Product type: PVC Reducing Socket
- Designed for joining compatible PVC pipe sizes while reducing diameter
- Dimensions retained from source specification
- For compatible professional PVC irrigation systems
Reducing pipe diameter
Use the reducing socket to transition between the stated compatible PVC diameters. A reduction changes downstream velocity and pressure-loss characteristics, so consider the hydraulic effect as well as the physical fit.
Pipe preparation & solvent welding
Cut PVC pipe squarely, remove burrs and clean the mating surfaces. Dry-fit the layout where practical before applying compatible cleaner and adhesive.
Follow the adhesive manufacturer's current application and curing instructions. Do not assume one curing time is suitable for every pipe diameter, temperature or installation condition.
Supporting the installation
Support rigid pipework at suitable intervals and around valves, unions and heavy equipment. Avoid transferring mechanical strain into threaded adaptors or solvent-weld joints.
Commissioning & pressure checks
After the applicable curing period, commission the system gradually and inspect joints for leakage. Operating pressure must remain within the requirements of every component in the complete system, not simply the pipe itself.
Maintenance
Inspect accessible pipe and fittings periodically for leakage, movement, impact damage or cracking. Isolate the system before servicing and repair faults using compatible components and proper joint preparation.
PVC Reducing Socket - 50/40mm x 32mm product details
| Product type | PVC Reducing Socket |
|---|---|
| Source dimensions / designation | Reducing Socket - 50/40mm x 32mm |
| Primary use | joining compatible PVC pipe sizes while reducing diameter |
| Application | Professional PVC irrigation and water-distribution systems |
PVC Reducing Socket - 50/40mm x 32mm FAQs
What is this product used for?
Joining compatible pvc pipe sizes while reducing diameter. How do I check the correct size?
Match every stated pipe diameter, thread and connection type to the intended system. Should PVC pipe be cut squarely?
Yes. Square, deburred cuts help fittings seat correctly and support reliable solvent-weld preparation. Can I force an adaptor onto a different size?
No. Use components specifically compatible with the stated dimensions and thread type. Should rigid PVC pipe be supported?
Yes. Support runs so joints and equipment connections are not carrying avoidable mechanical loads. When can a solvent-weld system be pressurised?
Follow the adhesive manufacturer's current curing and commissioning instructions. Does pipe diameter affect irrigation performance?
Yes. Diameter, run length and flow affect water velocity and pressure loss through the system. What should I do if a joint leaks?
Safely isolate the system and repair the joint correctly rather than relying on temporary external sealing.
The PVC Reducing Socket - 63/50mm x 40mm is designed for joining compatible PVC pipe sizes while reducing diameter in compatible professional PVC irrigation and water-distribution systems.
Correct pipe and adaptor selection helps maintain clean alignment, serviceability and reliable connections throughout fixed irrigation installations.
Key benefits
- Product type: PVC Reducing Socket
- Designed for joining compatible PVC pipe sizes while reducing diameter
- Dimensions retained from source specification
- For compatible professional PVC irrigation systems
Reducing pipe diameter
Use the reducing socket to transition between the stated compatible PVC diameters. A reduction changes downstream velocity and pressure-loss characteristics, so consider the hydraulic effect as well as the physical fit.
Pipe preparation & solvent welding
Cut PVC pipe squarely, remove burrs and clean the mating surfaces. Dry-fit the layout where practical before applying compatible cleaner and adhesive.
Follow the adhesive manufacturer's current application and curing instructions. Do not assume one curing time is suitable for every pipe diameter, temperature or installation condition.
Supporting the installation
Support rigid pipework at suitable intervals and around valves, unions and heavy equipment. Avoid transferring mechanical strain into threaded adaptors or solvent-weld joints.
Commissioning & pressure checks
After the applicable curing period, commission the system gradually and inspect joints for leakage. Operating pressure must remain within the requirements of every component in the complete system, not simply the pipe itself.
Maintenance
Inspect accessible pipe and fittings periodically for leakage, movement, impact damage or cracking. Isolate the system before servicing and repair faults using compatible components and proper joint preparation.
PVC Reducing Socket - 63/50mm x 40mm product details
| Product type | PVC Reducing Socket |
|---|---|
| Source dimensions / designation | Reducing Socket - 63/50mm x 40mm |
| Primary use | joining compatible PVC pipe sizes while reducing diameter |
| Application | Professional PVC irrigation and water-distribution systems |
PVC Reducing Socket - 63/50mm x 40mm FAQs
What is this product used for?
Joining compatible pvc pipe sizes while reducing diameter. How do I check the correct size?
Match every stated pipe diameter, thread and connection type to the intended system. Should PVC pipe be cut squarely?
Yes. Square, deburred cuts help fittings seat correctly and support reliable solvent-weld preparation. Can I force an adaptor onto a different size?
No. Use components specifically compatible with the stated dimensions and thread type. Should rigid PVC pipe be supported?
Yes. Support runs so joints and equipment connections are not carrying avoidable mechanical loads. When can a solvent-weld system be pressurised?
Follow the adhesive manufacturer's current curing and commissioning instructions. Does pipe diameter affect irrigation performance?
Yes. Diameter, run length and flow affect water velocity and pressure loss through the system. What should I do if a joint leaks?
Safely isolate the system and repair the joint correctly rather than relying on temporary external sealing.
The PVC Reducing Socket - 63mm x 50mm is designed for joining compatible PVC pipe sizes while reducing diameter in compatible professional PVC irrigation and water-distribution systems.
Correct pipe and adaptor selection helps maintain clean alignment, serviceability and reliable connections throughout fixed irrigation installations.
Key benefits
- Product type: PVC Reducing Socket
- Designed for joining compatible PVC pipe sizes while reducing diameter
- Dimensions retained from source specification
- For compatible professional PVC irrigation systems
Reducing pipe diameter
Use the reducing socket to transition between the stated compatible PVC diameters. A reduction changes downstream velocity and pressure-loss characteristics, so consider the hydraulic effect as well as the physical fit.
Pipe preparation & solvent welding
Cut PVC pipe squarely, remove burrs and clean the mating surfaces. Dry-fit the layout where practical before applying compatible cleaner and adhesive.
Follow the adhesive manufacturer's current application and curing instructions. Do not assume one curing time is suitable for every pipe diameter, temperature or installation condition.
Supporting the installation
Support rigid pipework at suitable intervals and around valves, unions and heavy equipment. Avoid transferring mechanical strain into threaded adaptors or solvent-weld joints.
Commissioning & pressure checks
After the applicable curing period, commission the system gradually and inspect joints for leakage. Operating pressure must remain within the requirements of every component in the complete system, not simply the pipe itself.
Maintenance
Inspect accessible pipe and fittings periodically for leakage, movement, impact damage or cracking. Isolate the system before servicing and repair faults using compatible components and proper joint preparation.
PVC Reducing Socket - 63mm x 50mm product details
| Product type | PVC Reducing Socket |
|---|---|
| Source dimensions / designation | Reducing Socket - 63mm x 50mm |
| Primary use | joining compatible PVC pipe sizes while reducing diameter |
| Application | Professional PVC irrigation and water-distribution systems |
PVC Reducing Socket - 63mm x 50mm FAQs
What is this product used for?
Joining compatible pvc pipe sizes while reducing diameter. How do I check the correct size?
Match every stated pipe diameter, thread and connection type to the intended system. Should PVC pipe be cut squarely?
Yes. Square, deburred cuts help fittings seat correctly and support reliable solvent-weld preparation. Can I force an adaptor onto a different size?
No. Use components specifically compatible with the stated dimensions and thread type. Should rigid PVC pipe be supported?
Yes. Support runs so joints and equipment connections are not carrying avoidable mechanical loads. When can a solvent-weld system be pressurised?
Follow the adhesive manufacturer's current curing and commissioning instructions. Does pipe diameter affect irrigation performance?
Yes. Diameter, run length and flow affect water velocity and pressure loss through the system. What should I do if a joint leaks?
Safely isolate the system and repair the joint correctly rather than relying on temporary external sealing.
PVC Socket Union 40mm x 40mm - Solvent Weld Irrigation Pipe Fitting
643
£6.43
Unit price per
Please sign in to see pricing
PVC Socket Union 40mm x 40mm - Solvent Weld Irrigation Pipe Fitting
643
£6.43
Unit price per
Please sign in to see pricing
This 40mm x 40mm PVC Socket Union is a detachable solvent-weld pipe fitting designed to connect two sections of 40mm metric PVC pipe while allowing the pipework to be separated later for servicing, cleaning or system modification.
Unlike a conventional straight socket, the central union can be unscrewed to separate the two sides without cutting the surrounding pipework. This makes it particularly useful around pumps, filters, valves and other components that may need to be removed periodically.
Both ends accept 40mm metric PVC pipe and are designed to be permanently bonded using suitable PVC solvent cement. Once installed, the central union provides a convenient removable connection point within an otherwise permanent pipe system.
A practical choice for professional irrigation, nursery water systems, agriculture, aquaculture and other rigid PVC installations where reliable water distribution and future maintenance access are important.
Why use a 40mm PVC Socket Union?
- Detachable connection - allows sections of pipework to be separated without cutting the pipe.
- 40mm x 40mm configuration - designed for equal-size 40mm metric PVC pipework.
- Solvent-weld sockets - creates permanent connections between the union ends and compatible pipe.
- Removable centre section - ideal for components that require periodic maintenance or replacement.
- Rigid PVC construction - lightweight, durable and resistant to corrosion.
- Useful around pumps and filters - makes equipment removal significantly easier.
- Reusable union connection - disconnect and reassemble the central joint while leaving the surrounding pipework in place.
- Professional irrigation fitting - suitable for commercial horticulture, agriculture and water-management installations.
Permanent pipework with a removable connection
A PVC union provides the reliability of solvent-weld pipework while creating a deliberate point at which the system can later be separated.
The two outer sockets are solvent welded permanently to the 40mm pipe. The central threaded union nut then secures the two halves of the fitting together around the union seal.
When maintenance is required, the water system can be isolated and the union disconnected. The equipment or relevant section of pipework can then be removed without disturbing the permanent solvent-weld joints.
Ideal for irrigation & water-management systems
Socket unions can be incorporated throughout rigid PVC pipe networks, but they are especially valuable next to equipment that is likely to need servicing during the life of the installation.
- Commercial irrigation systems
- Nursery and glasshouse water distribution
- Pump installations
- Filtration systems
- Valve assemblies
- Fertigation systems
- Water-storage and transfer systems
- Aquaculture and aquaponic installations
- Ponds and water features
- General 40mm metric PVC pipework
Make pumps, filters & valves easier to service
Planning service points into an irrigation system during installation can save considerable time later.
A pump or filter installed entirely between permanent solvent-weld joints may require pipework to be cut when the component eventually needs removing. Installing unions at suitable points creates intentional breaks in the system instead.
Once safely isolated and depressurised, the union can be opened and the component removed. After servicing or replacement, the union can simply be reassembled.
Installing a 40mm PVC Socket Union
- Plan the position of the union before permanently assembling the pipe system.
- Cut the 40mm PVC pipe squarely and remove burrs from the cut edges.
- Ensure the pipe and socket surfaces are clean, dry and correctly prepared.
- Dry-fit the components first to confirm alignment and orientation.
- Use suitable PVC cleaner and solvent cement according to the manufacturer's instructions.
- Insert the pipe fully into each socket and allow the solvent-weld joints to cure correctly.
- Keep the union sealing surfaces clean and correctly seated during assembly.
- Tighten the union securely without applying unnecessary excessive force.
- Allow the solvent-weld joints to cure for the specified period before operating the system.
- Check the completed installation carefully for leaks when commissioning the pipework.
40mm metric PVC pipe compatibility
This fitting is intended for a 40mm metric PVC pipe system. Compatible pipe with a 40mm outside diameter inserts into the plain sockets before being solvent welded into position.
Metric pressure pipe and fittings should not be assumed to fit similarly named imperial pipe or standard UK waste pipe. Always check the actual pipe system and outside diameter before installation.
For a reliable joint, use PVC preparation products and solvent cement suitable for the specific pipe and fittings being installed.
Where should a PVC union be positioned?
For serviceable equipment, unions are normally most useful when positioned so the component can be removed without dismantling the rest of the installation.
For example, installing appropriate unions either side of a pump or filter can allow the complete component to be removed after the water supply has been safely isolated. This is particularly valuable in professional irrigation systems where downtime needs to be kept to a minimum.
40mm PVC Socket Union product details
| Product type | PVC socket union |
|---|---|
| Size | 40mm x 40mm |
| Pipe system | Metric PVC |
| Connection | Plain socket x plain socket |
| Jointing method | Solvent weld / solvent cement |
| Compatible pipe size | 40mm outside diameter metric PVC pipe |
| Material | PVC |
| Union type | Detachable central screw union |
| Primary application | Irrigation and water-management pipework |
| Suitable for | Irrigation, pumps, filters, valves, water distribution, aquaculture and compatible rigid PVC systems |
40mm PVC Socket Union FAQs
What is a 40mm PVC union used for?
It connects two sections of compatible 40mm PVC pipe while creating a removable joint that can be opened later for maintenance or equipment replacement. Does this union fit 40mm PVC pipe?
Yes. The plain sockets are designed for compatible metric PVC pipe with a 40mm outside diameter. Are both ends solvent weld?
Yes. Both plain socket ends are designed to be bonded to compatible 40mm PVC pipe using suitable solvent cement. Can I disconnect it after the pipe has been glued?
Yes. The outer socket joints remain permanently bonded to the pipe, while the central union can be unscrewed to separate the two sides. Where is a union most useful in an irrigation system?
They are particularly useful next to pumps, filters, valves and other components that may need to be removed periodically for servicing or replacement. What is the difference between a socket union and a straight socket?
A conventional straight socket permanently joins two pipes. A union performs the same basic connection function but adds a detachable centre, allowing the pipework to be separated later. Is the 40mm measurement the pipe outside diameter?
Yes. Metric PVC pipe systems are commonly specified by the pipe's outside diameter, so compatible 40mm pipe has a nominal outside diameter of 40mm. Will standard UK 40mm waste pipe fit?
Do not assume so. Metric PVC pressure systems and standard waste-pipe systems can use different dimensions and fitting standards. Confirm the pipe type and actual dimensions before installation. Do I glue the threaded centre of the union?
No. The plain sockets are solvent welded to the pipe, while the central union must remain detachable so it can be opened for maintenance. Can this fitting be used around a pump?
Yes. Pump installations are a common use for unions because they allow the pump to be removed without cutting the surrounding rigid pipework. Can I reuse the union after disconnecting it?
Yes. Provided the union and its sealing components remain clean and undamaged, the central connection is designed to be disconnected and reassembled while the socket ends stay bonded to the pipe. What should I check before restarting the system?
Confirm that the union is correctly assembled, the seal is clean and properly seated, all solvent-weld joints have fully cured and the pipework is adequately supported. Check carefully for leaks when the system is restarted.
PVC Socket Union 50mm x 50mm - Solvent Weld Irrigation Pipe Fitting
957
£9.57
Unit price per
Please sign in to see pricing
PVC Socket Union 50mm x 50mm - Solvent Weld Irrigation Pipe Fitting
957
£9.57
Unit price per
Please sign in to see pricing
This 50mm x 50mm PVC Socket Union is a detachable solvent-weld pipe fitting designed to connect two sections of 50mm metric PVC pipe while allowing the pipework to be separated later for servicing, cleaning or system modification.
Unlike a conventional straight socket, the central threaded union can be unscrewed to separate the two sides of the fitting without cutting the surrounding pipework. This makes it particularly useful around pumps, filters, valves and other components that may require periodic removal or maintenance.
Both ends accept 50mm metric PVC pressure pipe and are designed to be permanently bonded using suitable PVC solvent cement. Once installed, the central union provides the removable connection point.
A practical fitting for professional irrigation, water distribution, horticultural installations, aquaculture and other rigid PVC pipe systems where future access needs to be considered during installation.
Why use a 50mm PVC Socket Union?
- Detachable pipe connection - separates at the central union without cutting the installed pipe.
- 50mm x 50mm connection - designed for joining equal-size 50mm metric PVC pipework.
- Plain socket ends - both sides accept compatible 50mm PVC pipe for solvent-weld installation.
- Ideal for maintenance points - useful wherever equipment may need to be removed in future.
- Rigid PVC construction - durable, lightweight and corrosion resistant.
- Smooth internal bore - helps maintain efficient water movement through the pipe system.
- Reusable union connection - the centre can be disconnected and reassembled while the solvent-weld ends remain permanently installed.
- Professional irrigation fitting - suitable for commercial horticulture, agriculture and water-management installations.
Permanent pipe joints with a removable centre
The advantage of a union is that it combines two different types of connection in one fitting.
The outer sockets are solvent welded permanently to the 50mm PVC pipe. The central section uses a threaded union nut, allowing the two installed pipe sections to be disconnected without disturbing those solvent-welded joints.
This provides a convenient service point within an otherwise permanent rigid pipe installation and can save considerable time when equipment needs to be replaced or pipework altered.
Ideal for irrigation & water-management systems
Socket unions can be installed throughout rigid PVC pipe networks, but they are particularly useful immediately before or after components that are likely to require servicing.
- Commercial irrigation systems
- Nursery and glasshouse water distribution
- Pump installations
- Filtration equipment
- Valve assemblies
- Fertigation systems
- Water-storage and transfer systems
- Aquaculture and aquaponic installations
- Ponds and water features
- General 50mm rigid PVC pipework
Make pumps, filters & valves easier to service
Installing unions around serviceable equipment can make a substantial difference when maintenance is required.
If a pump, filter or valve is installed entirely between permanent solvent-weld joints, removing it later may require the pipe to be cut. Positioning suitable unions around the component creates deliberate separation points instead.
Once the system has been isolated and depressurised, the union can be unscrewed and the relevant section removed. After servicing, the fitting can be reassembled without replacing the surrounding pipework.
Installing a 50mm PVC Socket Union
- Plan the union position before permanently assembling the pipework.
- Cut the 50mm PVC pipe squarely and remove burrs from the cut edges.
- Ensure the pipe and fitting sockets are clean, dry and correctly prepared for solvent welding.
- Check the complete union is correctly orientated before applying solvent cement.
- Use a suitable PVC cleaner and solvent cement according to the manufacturer's instructions.
- Insert the pipe fully into each socket and allow the solvent-weld joints to cure correctly.
- Ensure the union sealing surfaces and seal are clean before assembling the centre connection.
- Tighten the union securely without excessive force.
- Allow the solvent-weld joints to cure fully before pressurising or operating the system.
- Check the completed installation for leaks when the system is commissioned.
50mm metric PVC compatibility
This is a metric 50mm fitting. Compatible 50mm PVC pressure pipe has an outside diameter of 50mm and fits inside the union's solvent-weld sockets.
Metric and imperial pipe sizes should not be assumed to be interchangeable simply because their nominal dimensions appear similar. Check the outside diameter and pipe system before installation.
For the strongest and most reliable joint, use PVC solvent cement and preparation products intended for the pipe and fittings being installed.
50mm PVC Socket Union product details
| Product type | PVC socket union |
|---|---|
| Size | 50mm x 50mm |
| Pipe system | Metric PVC |
| Connection | Plain socket x plain socket |
| Jointing method | Solvent weld / solvent cement |
| Compatible pipe size | 50mm outside diameter metric PVC pipe |
| Material | PVC |
| Union type | Detachable central screw union |
| Primary application | Irrigation and water-management pipework |
| Suitable for | Irrigation, pumps, filters, valves, water distribution, aquaculture and compatible rigid PVC systems |
50mm PVC Socket Union FAQs
What does a PVC union do?
A union joins two sections of pipe but includes a detachable centre connection. This allows the pipework to be separated later without cutting the permanently installed pipe. Does this union fit 50mm PVC pipe?
Yes. Both socket ends are designed for compatible metric PVC pipe with a 50mm outside diameter. Are both sides solvent weld?
Yes. This is a plain socket-to-socket union, with both ends designed to be bonded to compatible 50mm PVC pipe using suitable solvent cement. Can the union be disconnected after installation?
Yes. The socket joints remain permanently bonded to the pipe, while the central screw union can be separated for maintenance or equipment removal. Where should I install a union in an irrigation system?
Unions are particularly useful next to pumps, filters, valves and other components that may need to be removed for servicing or replacement. Do I need PVC solvent cement?
Yes. The two socket ends require a suitable PVC solvent-weld system. Follow the cleaner and solvent cement manufacturer's preparation, application and curing instructions. Can I use this instead of a standard 50mm straight socket?
Yes, where a detachable connection is useful. A standard socket creates a permanent connection, whereas a union adds the ability to separate the pipework later. Is 50mm the internal diameter of the pipe?
No. In a metric PVC pressure-pipe system, the compatible pipe is normally specified by its outside diameter. A 50mm pipe fits inside the corresponding 50mm socket fitting. Will 1.5-inch imperial PVC pipe fit this union?
Do not assume that imperial and metric PVC pipe are interchangeable. This fitting is intended for 50mm metric pipe, so check the actual pipe dimensions before installation. Can it be used in a commercial irrigation installation?
Yes. Detachable PVC unions are commonly used in irrigation and water-distribution systems where reliable pipe connections and future service access are required. Do I need to cut the pipe to service equipment after fitting a union?
Normally no. Once the system has been safely isolated and depressurised, the central union can be unscrewed to separate the pipe sections while the solvent-weld sockets remain installed. Should the union be glued together at the centre?
No. Only the plain socket connections to the PVC pipe are solvent welded. The central union is specifically designed to remain detachable.
PVC Socket Union 50mm x 50mm - Solvent Weld Irrigation Pipe Fitting
1477
£14.77
Unit price per
Please sign in to see pricing
PVC Socket Union 50mm x 50mm - Solvent Weld Irrigation Pipe Fitting
1477
£14.77
Unit price per
Please sign in to see pricing
This 50mm x 50mm PVC Socket Union is a detachable solvent-weld pipe fitting designed to connect two sections of 50mm metric PVC pipe while allowing the pipework to be separated later for servicing, cleaning or system modification.
Unlike a conventional straight socket, the central threaded union can be unscrewed to separate the two sides of the fitting without cutting the surrounding pipework. This makes it particularly useful around pumps, filters, valves and other components that may require periodic removal or maintenance.
Both ends accept 50mm metric PVC pressure pipe and are designed to be permanently bonded using suitable PVC solvent cement. Once installed, the central union provides the removable connection point.
A practical fitting for professional irrigation, water distribution, horticultural installations, aquaculture and other rigid PVC pipe systems where future access needs to be considered during installation.
Why use a 50mm PVC Socket Union?
- Detachable pipe connection - separates at the central union without cutting the installed pipe.
- 50mm x 50mm connection - designed for joining equal-size 50mm metric PVC pipework.
- Plain socket ends - both sides accept compatible 50mm PVC pipe for solvent-weld installation.
- Ideal for maintenance points - useful wherever equipment may need to be removed in future.
- Rigid PVC construction - durable, lightweight and corrosion resistant.
- Smooth internal bore - helps maintain efficient water movement through the pipe system.
- Reusable union connection - the centre can be disconnected and reassembled while the solvent-weld ends remain permanently installed.
- Professional irrigation fitting - suitable for commercial horticulture, agriculture and water-management installations.
Permanent pipe joints with a removable centre
The advantage of a union is that it combines two different types of connection in one fitting.
The outer sockets are solvent welded permanently to the 50mm PVC pipe. The central section uses a threaded union nut, allowing the two installed pipe sections to be disconnected without disturbing those solvent-welded joints.
This provides a convenient service point within an otherwise permanent rigid pipe installation and can save considerable time when equipment needs to be replaced or pipework altered.
Ideal for irrigation & water-management systems
Socket unions can be installed throughout rigid PVC pipe networks, but they are particularly useful immediately before or after components that are likely to require servicing.
- Commercial irrigation systems
- Nursery and glasshouse water distribution
- Pump installations
- Filtration equipment
- Valve assemblies
- Fertigation systems
- Water-storage and transfer systems
- Aquaculture and aquaponic installations
- Ponds and water features
- General 50mm rigid PVC pipework
Make pumps, filters & valves easier to service
Installing unions around serviceable equipment can make a substantial difference when maintenance is required.
If a pump, filter or valve is installed entirely between permanent solvent-weld joints, removing it later may require the pipe to be cut. Positioning suitable unions around the component creates deliberate separation points instead.
Once the system has been isolated and depressurised, the union can be unscrewed and the relevant section removed. After servicing, the fitting can be reassembled without replacing the surrounding pipework.
Installing a 50mm PVC Socket Union
- Plan the union position before permanently assembling the pipework.
- Cut the 50mm PVC pipe squarely and remove burrs from the cut edges.
- Ensure the pipe and fitting sockets are clean, dry and correctly prepared for solvent welding.
- Check the complete union is correctly orientated before applying solvent cement.
- Use a suitable PVC cleaner and solvent cement according to the manufacturer's instructions.
- Insert the pipe fully into each socket and allow the solvent-weld joints to cure correctly.
- Ensure the union sealing surfaces and seal are clean before assembling the centre connection.
- Tighten the union securely without excessive force.
- Allow the solvent-weld joints to cure fully before pressurising or operating the system.
- Check the completed installation for leaks when the system is commissioned.
50mm metric PVC compatibility
This is a metric 50mm fitting. Compatible 50mm PVC pressure pipe has an outside diameter of 50mm and fits inside the union's solvent-weld sockets.
Metric and imperial pipe sizes should not be assumed to be interchangeable simply because their nominal dimensions appear similar. Check the outside diameter and pipe system before installation.
For the strongest and most reliable joint, use PVC solvent cement and preparation products intended for the pipe and fittings being installed.
50mm PVC Socket Union product details
| Product type | PVC socket union |
|---|---|
| Size | 50mm x 50mm |
| Pipe system | Metric PVC |
| Connection | Plain socket x plain socket |
| Jointing method | Solvent weld / solvent cement |
| Compatible pipe size | 50mm outside diameter metric PVC pipe |
| Material | PVC |
| Union type | Detachable central screw union |
| Primary application | Irrigation and water-management pipework |
| Suitable for | Irrigation, pumps, filters, valves, water distribution, aquaculture and compatible rigid PVC systems |
50mm PVC Socket Union FAQs
What does a PVC union do?
A union joins two sections of pipe but includes a detachable centre connection. This allows the pipework to be separated later without cutting the permanently installed pipe. Does this union fit 50mm PVC pipe?
Yes. Both socket ends are designed for compatible metric PVC pipe with a 50mm outside diameter. Are both sides solvent weld?
Yes. This is a plain socket-to-socket union, with both ends designed to be bonded to compatible 50mm PVC pipe using suitable solvent cement. Can the union be disconnected after installation?
Yes. The socket joints remain permanently bonded to the pipe, while the central screw union can be separated for maintenance or equipment removal. Where should I install a union in an irrigation system?
Unions are particularly useful next to pumps, filters, valves and other components that may need to be removed for servicing or replacement. Do I need PVC solvent cement?
Yes. The two socket ends require a suitable PVC solvent-weld system. Follow the cleaner and solvent cement manufacturer's preparation, application and curing instructions. Can I use this instead of a standard 50mm straight socket?
Yes, where a detachable connection is useful. A standard socket creates a permanent connection, whereas a union adds the ability to separate the pipework later. Is 50mm the internal diameter of the pipe?
No. In a metric PVC pressure-pipe system, the compatible pipe is normally specified by its outside diameter. A 50mm pipe fits inside the corresponding 50mm socket fitting. Will 1.5-inch imperial PVC pipe fit this union?
Do not assume that imperial and metric PVC pipe are interchangeable. This fitting is intended for 50mm metric pipe, so check the actual pipe dimensions before installation. Can it be used in a commercial irrigation installation?
Yes. Detachable PVC unions are commonly used in irrigation and water-distribution systems where reliable pipe connections and future service access are required. Do I need to cut the pipe to service equipment after fitting a union?
Normally no. Once the system has been safely isolated and depressurised, the central union can be unscrewed to separate the pipe sections while the solvent-weld sockets remain installed. Should the union be glued together at the centre?
No. Only the plain socket connections to the PVC pipe are solvent welded. The central union is specifically designed to remain detachable.
The PVC Union Socket 20mm x 20mm is designed for joining equal-size compatible PVC pipe sections with a serviceable union connection in compatible professional PVC irrigation and water-distribution systems.
Correct pipe and adaptor selection helps maintain clean alignment, serviceability and reliable connections throughout fixed irrigation installations.
Key benefits
- Product type: PVC Union Socket
- Designed for joining equal-size compatible PVC pipe sections with a serviceable union connection
- Dimensions retained from source specification
- For compatible professional PVC irrigation systems
Joining PVC pipe with service access
A union socket joins compatible pipe while allowing the connection to be separated later for servicing. Install it where there is sufficient access to undo and remove components without placing strain on adjacent pipework.
Pipe preparation & solvent welding
Cut PVC pipe squarely, remove burrs and clean the mating surfaces. Dry-fit the layout where practical before applying compatible cleaner and adhesive.
Follow the adhesive manufacturer's current application and curing instructions. Do not assume one curing time is suitable for every pipe diameter, temperature or installation condition.
Supporting the installation
Support rigid pipework at suitable intervals and around valves, unions and heavy equipment. Avoid transferring mechanical strain into threaded adaptors or solvent-weld joints.
Commissioning & pressure checks
After the applicable curing period, commission the system gradually and inspect joints for leakage. Operating pressure must remain within the requirements of every component in the complete system, not simply the pipe itself.
Maintenance
Inspect accessible pipe and fittings periodically for leakage, movement, impact damage or cracking. Isolate the system before servicing and repair faults using compatible components and proper joint preparation.
PVC Union Socket 20mm x 20mm product details
| Product type | PVC Union Socket |
|---|---|
| Source dimensions / designation | Union Socket 20mm x 20mm |
| Primary use | joining equal-size compatible PVC pipe sections with a serviceable union connection |
| Application | Professional PVC irrigation and water-distribution systems |
PVC Union Socket 20mm x 20mm FAQs
What is this product used for?
Joining equal-size compatible pvc pipe sections with a serviceable union connection. How do I check the correct size?
Match every stated pipe diameter, thread and connection type to the intended system. Should PVC pipe be cut squarely?
Yes. Square, deburred cuts help fittings seat correctly and support reliable solvent-weld preparation. Can I force an adaptor onto a different size?
No. Use components specifically compatible with the stated dimensions and thread type. Should rigid PVC pipe be supported?
Yes. Support runs so joints and equipment connections are not carrying avoidable mechanical loads. When can a solvent-weld system be pressurised?
Follow the adhesive manufacturer's current curing and commissioning instructions. Does pipe diameter affect irrigation performance?
Yes. Diameter, run length and flow affect water velocity and pressure loss through the system. What should I do if a joint leaks?
Safely isolate the system and repair the joint correctly rather than relying on temporary external sealing.
The PVC Union Socket 32mm x 32mm is designed for joining equal-size compatible PVC pipe sections with a serviceable union connection in compatible professional PVC irrigation and water-distribution systems.
Correct pipe and adaptor selection helps maintain clean alignment, serviceability and reliable connections throughout fixed irrigation installations.
Key benefits
- Product type: PVC Union Socket
- Designed for joining equal-size compatible PVC pipe sections with a serviceable union connection
- Dimensions retained from source specification
- For compatible professional PVC irrigation systems
Joining PVC pipe with service access
A union socket joins compatible pipe while allowing the connection to be separated later for servicing. Install it where there is sufficient access to undo and remove components without placing strain on adjacent pipework.
Pipe preparation & solvent welding
Cut PVC pipe squarely, remove burrs and clean the mating surfaces. Dry-fit the layout where practical before applying compatible cleaner and adhesive.
Follow the adhesive manufacturer's current application and curing instructions. Do not assume one curing time is suitable for every pipe diameter, temperature or installation condition.
Supporting the installation
Support rigid pipework at suitable intervals and around valves, unions and heavy equipment. Avoid transferring mechanical strain into threaded adaptors or solvent-weld joints.
Commissioning & pressure checks
After the applicable curing period, commission the system gradually and inspect joints for leakage. Operating pressure must remain within the requirements of every component in the complete system, not simply the pipe itself.
Maintenance
Inspect accessible pipe and fittings periodically for leakage, movement, impact damage or cracking. Isolate the system before servicing and repair faults using compatible components and proper joint preparation.
PVC Union Socket 32mm x 32mm product details
| Product type | PVC Union Socket |
|---|---|
| Source dimensions / designation | Union Socket 32mm x 32mm |
| Primary use | joining equal-size compatible PVC pipe sections with a serviceable union connection |
| Application | Professional PVC irrigation and water-distribution systems |
PVC Union Socket 32mm x 32mm FAQs
What is this product used for?
Joining equal-size compatible pvc pipe sections with a serviceable union connection. How do I check the correct size?
Match every stated pipe diameter, thread and connection type to the intended system. Should PVC pipe be cut squarely?
Yes. Square, deburred cuts help fittings seat correctly and support reliable solvent-weld preparation. Can I force an adaptor onto a different size?
No. Use components specifically compatible with the stated dimensions and thread type. Should rigid PVC pipe be supported?
Yes. Support runs so joints and equipment connections are not carrying avoidable mechanical loads. When can a solvent-weld system be pressurised?
Follow the adhesive manufacturer's current curing and commissioning instructions. Does pipe diameter affect irrigation performance?
Yes. Diameter, run length and flow affect water velocity and pressure loss through the system. What should I do if a joint leaks?
Safely isolate the system and repair the joint correctly rather than relying on temporary external sealing.
The PVC Union Socket 40mm x 40mm is designed for joining equal-size compatible PVC pipe sections with a serviceable union connection in compatible professional PVC irrigation and water-distribution systems.
Correct pipe and adaptor selection helps maintain clean alignment, serviceability and reliable connections throughout fixed irrigation installations.
Key benefits
- Product type: PVC Union Socket
- Designed for joining equal-size compatible PVC pipe sections with a serviceable union connection
- Dimensions retained from source specification
- For compatible professional PVC irrigation systems
Joining PVC pipe with service access
A union socket joins compatible pipe while allowing the connection to be separated later for servicing. Install it where there is sufficient access to undo and remove components without placing strain on adjacent pipework.
Pipe preparation & solvent welding
Cut PVC pipe squarely, remove burrs and clean the mating surfaces. Dry-fit the layout where practical before applying compatible cleaner and adhesive.
Follow the adhesive manufacturer's current application and curing instructions. Do not assume one curing time is suitable for every pipe diameter, temperature or installation condition.
Supporting the installation
Support rigid pipework at suitable intervals and around valves, unions and heavy equipment. Avoid transferring mechanical strain into threaded adaptors or solvent-weld joints.
Commissioning & pressure checks
After the applicable curing period, commission the system gradually and inspect joints for leakage. Operating pressure must remain within the requirements of every component in the complete system, not simply the pipe itself.
Maintenance
Inspect accessible pipe and fittings periodically for leakage, movement, impact damage or cracking. Isolate the system before servicing and repair faults using compatible components and proper joint preparation.
PVC Union Socket 40mm x 40mm product details
| Product type | PVC Union Socket |
|---|---|
| Source dimensions / designation | Union Socket 40mm x 40mm |
| Primary use | joining equal-size compatible PVC pipe sections with a serviceable union connection |
| Application | Professional PVC irrigation and water-distribution systems |
PVC Union Socket 40mm x 40mm FAQs
What is this product used for?
Joining equal-size compatible pvc pipe sections with a serviceable union connection. How do I check the correct size?
Match every stated pipe diameter, thread and connection type to the intended system. Should PVC pipe be cut squarely?
Yes. Square, deburred cuts help fittings seat correctly and support reliable solvent-weld preparation. Can I force an adaptor onto a different size?
No. Use components specifically compatible with the stated dimensions and thread type. Should rigid PVC pipe be supported?
Yes. Support runs so joints and equipment connections are not carrying avoidable mechanical loads. When can a solvent-weld system be pressurised?
Follow the adhesive manufacturer's current curing and commissioning instructions. Does pipe diameter affect irrigation performance?
Yes. Diameter, run length and flow affect water velocity and pressure loss through the system. What should I do if a joint leaks?
Safely isolate the system and repair the joint correctly rather than relying on temporary external sealing.
The PVC Union Socket 50mm x 50mm is designed for joining equal-size compatible PVC pipe sections with a serviceable union connection in compatible professional PVC irrigation and water-distribution systems.
Correct pipe and adaptor selection helps maintain clean alignment, serviceability and reliable connections throughout fixed irrigation installations.
Key benefits
- Product type: PVC Union Socket
- Designed for joining equal-size compatible PVC pipe sections with a serviceable union connection
- Dimensions retained from source specification
- For compatible professional PVC irrigation systems
Joining PVC pipe with service access
A union socket joins compatible pipe while allowing the connection to be separated later for servicing. Install it where there is sufficient access to undo and remove components without placing strain on adjacent pipework.
Pipe preparation & solvent welding
Cut PVC pipe squarely, remove burrs and clean the mating surfaces. Dry-fit the layout where practical before applying compatible cleaner and adhesive.
Follow the adhesive manufacturer's current application and curing instructions. Do not assume one curing time is suitable for every pipe diameter, temperature or installation condition.
Supporting the installation
Support rigid pipework at suitable intervals and around valves, unions and heavy equipment. Avoid transferring mechanical strain into threaded adaptors or solvent-weld joints.
Commissioning & pressure checks
After the applicable curing period, commission the system gradually and inspect joints for leakage. Operating pressure must remain within the requirements of every component in the complete system, not simply the pipe itself.
Maintenance
Inspect accessible pipe and fittings periodically for leakage, movement, impact damage or cracking. Isolate the system before servicing and repair faults using compatible components and proper joint preparation.
PVC Union Socket 50mm x 50mm product details
| Product type | PVC Union Socket |
|---|---|
| Source dimensions / designation | Union Socket 50mm x 50mm |
| Primary use | joining equal-size compatible PVC pipe sections with a serviceable union connection |
| Application | Professional PVC irrigation and water-distribution systems |
PVC Union Socket 50mm x 50mm FAQs
What is this product used for?
Joining equal-size compatible pvc pipe sections with a serviceable union connection. How do I check the correct size?
Match every stated pipe diameter, thread and connection type to the intended system. Should PVC pipe be cut squarely?
Yes. Square, deburred cuts help fittings seat correctly and support reliable solvent-weld preparation. Can I force an adaptor onto a different size?
No. Use components specifically compatible with the stated dimensions and thread type. Should rigid PVC pipe be supported?
Yes. Support runs so joints and equipment connections are not carrying avoidable mechanical loads. When can a solvent-weld system be pressurised?
Follow the adhesive manufacturer's current curing and commissioning instructions. Does pipe diameter affect irrigation performance?
Yes. Diameter, run length and flow affect water velocity and pressure loss through the system. What should I do if a joint leaks?
Safely isolate the system and repair the joint correctly rather than relying on temporary external sealing.
The PVC Union Socket 63mm x 63mm is designed for joining equal-size compatible PVC pipe sections with a serviceable union connection in compatible professional PVC irrigation and water-distribution systems.
Correct pipe and adaptor selection helps maintain clean alignment, serviceability and reliable connections throughout fixed irrigation installations.
Key benefits
- Product type: PVC Union Socket
- Designed for joining equal-size compatible PVC pipe sections with a serviceable union connection
- Dimensions retained from source specification
- For compatible professional PVC irrigation systems
Joining PVC pipe with service access
A union socket joins compatible pipe while allowing the connection to be separated later for servicing. Install it where there is sufficient access to undo and remove components without placing strain on adjacent pipework.
Pipe preparation & solvent welding
Cut PVC pipe squarely, remove burrs and clean the mating surfaces. Dry-fit the layout where practical before applying compatible cleaner and adhesive.
Follow the adhesive manufacturer's current application and curing instructions. Do not assume one curing time is suitable for every pipe diameter, temperature or installation condition.
Supporting the installation
Support rigid pipework at suitable intervals and around valves, unions and heavy equipment. Avoid transferring mechanical strain into threaded adaptors or solvent-weld joints.
Commissioning & pressure checks
After the applicable curing period, commission the system gradually and inspect joints for leakage. Operating pressure must remain within the requirements of every component in the complete system, not simply the pipe itself.
Maintenance
Inspect accessible pipe and fittings periodically for leakage, movement, impact damage or cracking. Isolate the system before servicing and repair faults using compatible components and proper joint preparation.
PVC Union Socket 63mm x 63mm product details
| Product type | PVC Union Socket |
|---|---|
| Source dimensions / designation | Union Socket 63mm x 63mm |
| Primary use | joining equal-size compatible PVC pipe sections with a serviceable union connection |
| Application | Professional PVC irrigation and water-distribution systems |
PVC Union Socket 63mm x 63mm FAQs
What is this product used for?
Joining equal-size compatible pvc pipe sections with a serviceable union connection. How do I check the correct size?
Match every stated pipe diameter, thread and connection type to the intended system. Should PVC pipe be cut squarely?
Yes. Square, deburred cuts help fittings seat correctly and support reliable solvent-weld preparation. Can I force an adaptor onto a different size?
No. Use components specifically compatible with the stated dimensions and thread type. Should rigid PVC pipe be supported?
Yes. Support runs so joints and equipment connections are not carrying avoidable mechanical loads. When can a solvent-weld system be pressurised?
Follow the adhesive manufacturer's current curing and commissioning instructions. Does pipe diameter affect irrigation performance?
Yes. Diameter, run length and flow affect water velocity and pressure loss through the system. What should I do if a joint leaks?
Safely isolate the system and repair the joint correctly rather than relying on temporary external sealing.
Pyramid Cap for 3 Bamboo Canes all sizes GREEN (Box of 1000)
12111
£121.11
Unit price per
Please sign in to see pricing
Pyramid Cap for 3 Bamboo Canes all sizes GREEN (Box of 1000)
12111
£121.11
Unit price per
Please sign in to see pricing
The Pyramid Cap for 3 Bamboo Canes all sizes GREEN (Box of 1000) is a practical plant support cane designed for supporting upright and climbing plants.
It is suited to routine horticultural work in nurseries, greenhouses, garden centres and gardens where a straightforward accessory is required.
Key benefits
- Designed for supporting upright and climbing plants
- Practical for routine horticultural use
- Suitable for growers, nurseries, garden centres and gardeners
- Helps organise and support plants during growth when used appropriately
How to use it
Use this product for supporting upright and climbing plants. Select the size and format to suit the plant, container or growing area and check its position periodically as plants develop.
When supporting stems, avoid fastening so tightly that growth is restricted. Check ties and supports during the season and adjust them as stems thicken.
For professional & garden use
This accessory can be used for individual plants and displays or incorporated into larger nursery, landscaping and retail programmes.
Pyramid Cap for 3 Bamboo Canes all sizes GREEN (Box of 1000) product details
| Supplier | Creation Horticulture |
|---|---|
| Product type | Plant support cane |
| Primary use | supporting upright and climbing plants |
Pyramid Cap for 3 Bamboo Canes all sizes GREEN (Box of 1000) FAQs
What is this product used for?
It is designed for supporting upright and climbing plants. Can it be used on young plants?
Yes, where the size and support method are appropriate. Leave enough room for stems to expand and check the support as the plant grows. How tightly should plants be secured?
Secure plants firmly enough for support but not so tightly that stems are pinched or restricted. Should supports be checked during the season?
Yes. Adjust ties, clips and supports as plants grow and replace anything that has become damaged or restrictive.
Quick-Coupling Barbed Hose Fitting - Hose diameter 1" (25mm)
520
£5.20
Unit price per
Please sign in to see pricing
Quick-Coupling Barbed Hose Fitting - Hose diameter 1" (25mm)
520
£5.20
Unit price per
Please sign in to see pricing
The Quick-Coupling Barbed Hose Fitting - Hose diameter 1" (25mm) is designed for connecting compatible hose to a quick-coupling system in professional horticultural, nursery, landscape and garden watering systems.
Correct hose fittings and storage equipment help keep watering systems organised, serviceable and easier to move between working areas.
Key benefits
- Product type: Quick-Coupling Barbed Hose Fitting
- Designed for connecting compatible hose to a quick-coupling system
- Source sizes and hose capacities retained
- Suitable for professional horticultural watering systems
Building serviceable hose connections
Match the fitting to the stated hose diameter and coupling system. Push barbed fittings fully into compatible hose and secure them using the appropriate method for the system.
Keep sealing faces and washers clean. If a connection leaks, inspect the seal, hose end and coupling condition rather than relying on excessive tightening.
Watering-system setup
Choose hose diameter and fittings according to the required flow, run length and available water pressure. Long hose runs and restrictive fittings can reduce pressure and flow at the watering lance or outlet.
Leak checks & maintenance
Inspect hose ends, seals, couplings and moving trolley parts periodically. Replace split hose, worn seals and damaged fittings rather than accepting persistent leakage.
Storage
Store hose and fittings clean and protected from unnecessary physical damage. Avoid leaving hose tightly kinked or under tension around fittings during storage.
Quick-Coupling Barbed Hose Fitting - Hose diameter 1" (25mm) product details
| Product type | Quick-Coupling Barbed Hose Fitting |
|---|---|
| Primary use | connecting compatible hose to a quick-coupling system |
| Source designation | Quick-Coupling Barbed Hose Fitting - Hose diameter 1" (25mm) |
| Application | Professional horticultural and garden watering systems |
Quick-Coupling Barbed Hose Fitting - Hose diameter 1" (25mm) FAQs
What is this product used for?
Connecting compatible hose to a quick-coupling system. How do I check compatibility?
Match the stated hose diameter, fitting type and coupling system to the equipment already in use. Can different hose diameters use the same fitting?
Not unless the fitting is specifically designed for those sizes. Use the stated compatible diameter. What should I check if a hose connection leaks?
Inspect the hose end, seal, washer and coupling surfaces and replace damaged components. Does hose length affect water delivery?
Yes. Longer runs and restrictive fittings can contribute to pressure loss and reduced flow. How should hose equipment be stored?
Keep it clean and protected and avoid severe kinks, crushing or continuous strain on fittings. Should fittings be inspected regularly?
Yes. Check seals, coupling faces and hose connections for wear or damage. Can hose trolleys be overloaded?
Use each component only within the capacity and application appropriate to the complete watering system.
Quick-Coupling Barbed Hose Fitting - Hose diameter 1/2" (12.5mm)
400
£4.00
Unit price per
Please sign in to see pricing
Quick-Coupling Barbed Hose Fitting - Hose diameter 1/2" (12.5mm)
400
£4.00
Unit price per
Please sign in to see pricing
The Quick-Coupling Barbed Hose Fitting - Hose diameter 1/2" (12.5mm) is designed for connecting compatible hose to a quick-coupling system in professional horticultural, nursery, landscape and garden watering systems.
Correct hose fittings and storage equipment help keep watering systems organised, serviceable and easier to move between working areas.
Key benefits
- Product type: Quick-Coupling Barbed Hose Fitting
- Designed for connecting compatible hose to a quick-coupling system
- Source sizes and hose capacities retained
- Suitable for professional horticultural watering systems
Building serviceable hose connections
Match the fitting to the stated hose diameter and coupling system. Push barbed fittings fully into compatible hose and secure them using the appropriate method for the system.
Keep sealing faces and washers clean. If a connection leaks, inspect the seal, hose end and coupling condition rather than relying on excessive tightening.
Watering-system setup
Choose hose diameter and fittings according to the required flow, run length and available water pressure. Long hose runs and restrictive fittings can reduce pressure and flow at the watering lance or outlet.
Leak checks & maintenance
Inspect hose ends, seals, couplings and moving trolley parts periodically. Replace split hose, worn seals and damaged fittings rather than accepting persistent leakage.
Storage
Store hose and fittings clean and protected from unnecessary physical damage. Avoid leaving hose tightly kinked or under tension around fittings during storage.
Quick-Coupling Barbed Hose Fitting - Hose diameter 1/2" (12.5mm) product details
| Product type | Quick-Coupling Barbed Hose Fitting |
|---|---|
| Primary use | connecting compatible hose to a quick-coupling system |
| Source designation | Quick-Coupling Barbed Hose Fitting - Hose diameter 1/2" (12.5mm) |
| Application | Professional horticultural and garden watering systems |
Quick-Coupling Barbed Hose Fitting - Hose diameter 1/2" (12.5mm) FAQs
What is this product used for?
Connecting compatible hose to a quick-coupling system. How do I check compatibility?
Match the stated hose diameter, fitting type and coupling system to the equipment already in use. Can different hose diameters use the same fitting?
Not unless the fitting is specifically designed for those sizes. Use the stated compatible diameter. What should I check if a hose connection leaks?
Inspect the hose end, seal, washer and coupling surfaces and replace damaged components. Does hose length affect water delivery?
Yes. Longer runs and restrictive fittings can contribute to pressure loss and reduced flow. How should hose equipment be stored?
Keep it clean and protected and avoid severe kinks, crushing or continuous strain on fittings. Should fittings be inspected regularly?
Yes. Check seals, coupling faces and hose connections for wear or damage. Can hose trolleys be overloaded?
Use each component only within the capacity and application appropriate to the complete watering system.
Quick-Coupling Barbed Hose Fitting - Hose diameter 3/4" (19mm)
425
£4.25
Unit price per
Please sign in to see pricing
Quick-Coupling Barbed Hose Fitting - Hose diameter 3/4" (19mm)
425
£4.25
Unit price per
Please sign in to see pricing
The Quick-Coupling Barbed Hose Fitting - Hose diameter 3/4" (19mm) is designed for connecting compatible hose to a quick-coupling system in professional horticultural, nursery, landscape and garden watering systems.
Correct hose fittings and storage equipment help keep watering systems organised, serviceable and easier to move between working areas.
Key benefits
- Product type: Quick-Coupling Barbed Hose Fitting
- Designed for connecting compatible hose to a quick-coupling system
- Source sizes and hose capacities retained
- Suitable for professional horticultural watering systems
Building serviceable hose connections
Match the fitting to the stated hose diameter and coupling system. Push barbed fittings fully into compatible hose and secure them using the appropriate method for the system.
Keep sealing faces and washers clean. If a connection leaks, inspect the seal, hose end and coupling condition rather than relying on excessive tightening.
Watering-system setup
Choose hose diameter and fittings according to the required flow, run length and available water pressure. Long hose runs and restrictive fittings can reduce pressure and flow at the watering lance or outlet.
Leak checks & maintenance
Inspect hose ends, seals, couplings and moving trolley parts periodically. Replace split hose, worn seals and damaged fittings rather than accepting persistent leakage.
Storage
Store hose and fittings clean and protected from unnecessary physical damage. Avoid leaving hose tightly kinked or under tension around fittings during storage.
Quick-Coupling Barbed Hose Fitting - Hose diameter 3/4" (19mm) product details
| Product type | Quick-Coupling Barbed Hose Fitting |
|---|---|
| Primary use | connecting compatible hose to a quick-coupling system |
| Source designation | Quick-Coupling Barbed Hose Fitting - Hose diameter 3/4" (19mm) |
| Application | Professional horticultural and garden watering systems |
Quick-Coupling Barbed Hose Fitting - Hose diameter 3/4" (19mm) FAQs
What is this product used for?
Connecting compatible hose to a quick-coupling system. How do I check compatibility?
Match the stated hose diameter, fitting type and coupling system to the equipment already in use. Can different hose diameters use the same fitting?
Not unless the fitting is specifically designed for those sizes. Use the stated compatible diameter. What should I check if a hose connection leaks?
Inspect the hose end, seal, washer and coupling surfaces and replace damaged components. Does hose length affect water delivery?
Yes. Longer runs and restrictive fittings can contribute to pressure loss and reduced flow. How should hose equipment be stored?
Keep it clean and protected and avoid severe kinks, crushing or continuous strain on fittings. Should fittings be inspected regularly?
Yes. Check seals, coupling faces and hose connections for wear or damage. Can hose trolleys be overloaded?
Use each component only within the capacity and application appropriate to the complete watering system.
The Rainbow Aquadrip Water Bag (Box of 25) is a tree watering bag designed for slow, targeted watering around newly planted or established trees.
It is suited to professional landscaping, nursery and establishment work where the product's size and format match the planting or site requirements.
Supplied as: box of 25.
Key benefits
- Designed for slow, targeted watering around newly planted or established trees
- Suitable for professional landscaping and horticultural use
- Box quantity: 25
Targeted tree watering
Position the bag around the compatible tree and fill according to the product instructions. Slow release can help deliver water into the root-zone area over a longer period than a rapid surface application.
Continue to monitor soil moisture and weather; a watering bag does not remove the need to assess actual tree water demand.
Professional establishment & maintenance
Successful landscape establishment depends on more than the protection product alone. Check plant stability, watering, weed competition and general plant condition regularly during the establishment period.
Rainbow Aquadrip Water Bag (Box of 25) product details
| Brand | Rainbow |
|---|---|
| Product type | Tree watering bag |
| Primary use | slow, targeted watering around newly planted or established trees |
| Box quantity | 25 |
Rainbow Aquadrip Water Bag (Box of 25) FAQs
How many are supplied?
This product is supplied in a box of 25. What is a tree watering bag used for?
It provides a slower, targeted water application around the root-zone area of a compatible tree. Does a watering bag mean I no longer need to check soil moisture?
No. Check soil moisture and tree condition and adjust watering according to weather and site conditions. Can it be left permanently on the tree?
Follow the product instructions and inspect the tree and bag regularly rather than leaving any installation unchecked indefinitely.
Rainbow Bio Wrap Tree and Hedge Guards 50 - 40cm length (Box of 200)
14493
£144.93
Unit price per
Please sign in to see pricing
Rainbow Bio Wrap Tree and Hedge Guards 50 - 40cm length (Box of 200)
14493
£144.93
Unit price per
Please sign in to see pricing
The Rainbow Bio Wrap Tree and Hedge Guards 50 - 40cm length (Box of 200) is a tree & hedge guard designed for protecting young trees and hedge plants during establishment.
It is suited to professional landscaping, nursery and establishment work where the product's size and format match the planting or site requirements.
Supplied as: box of 200.
Key benefits
- Designed for protecting young trees and hedge plants during establishment
- Suitable for professional landscaping and horticultural use
- Stated size: 40cm
- Box quantity: 200
Protecting young trees & shrubs
Install the shelter or guard so it is stable and correctly positioned around the young plant without rubbing or constricting the stem. Use suitable stakes or supports where the system requires them.
Inspect guards periodically as the plant grows and remove, adjust or replace them when they are damaged or no longer required.
Professional establishment & maintenance
Successful landscape establishment depends on more than the protection product alone. Check plant stability, watering, weed competition and general plant condition regularly during the establishment period.
Rainbow Bio Wrap Tree and Hedge Guards 50 - 40cm length (Box of 200) product details
| Brand | Rainbow |
|---|---|
| Product type | Tree & hedge guard |
| Primary use | protecting young trees and hedge plants during establishment |
| Stated size | 40cm |
| Box quantity | 200 |
Rainbow Bio Wrap Tree and Hedge Guards 50 - 40cm length (Box of 200) FAQs
What size is this product?
The stated size is 40cm. How many are supplied?
This product is supplied in a box of 200. What are tree shelters and guards used for?
They help protect young plants from browsing and physical damage while they establish. Should guards be checked after planting?
Yes. Check stability, plant growth and any contact with the stem, adjusting or removing the guard when appropriate. Do tree guards replace watering and weed control?
No. Young plants still need appropriate watering, weed management and establishment care.
Rainbow Bio Wrap Tree and Hedge Guards 50 - 60cm length (Box of 200)
21547
£215.47
Unit price per
Please sign in to see pricing
Rainbow Bio Wrap Tree and Hedge Guards 50 - 60cm length (Box of 200)
21547
£215.47
Unit price per
Please sign in to see pricing
The Rainbow Bio Wrap Tree and Hedge Guards 50 - 60cm length (Box of 200) is a tree & hedge guard designed for protecting young trees and hedge plants during establishment.
It is suited to professional landscaping, nursery and establishment work where the product's size and format match the planting or site requirements.
Supplied as: box of 200.
Key benefits
- Designed for protecting young trees and hedge plants during establishment
- Suitable for professional landscaping and horticultural use
- Stated size: 60cm
- Box quantity: 200
Protecting young trees & shrubs
Install the shelter or guard so it is stable and correctly positioned around the young plant without rubbing or constricting the stem. Use suitable stakes or supports where the system requires them.
Inspect guards periodically as the plant grows and remove, adjust or replace them when they are damaged or no longer required.
Professional establishment & maintenance
Successful landscape establishment depends on more than the protection product alone. Check plant stability, watering, weed competition and general plant condition regularly during the establishment period.
Rainbow Bio Wrap Tree and Hedge Guards 50 - 60cm length (Box of 200) product details
| Brand | Rainbow |
|---|---|
| Product type | Tree & hedge guard |
| Primary use | protecting young trees and hedge plants during establishment |
| Stated size | 60cm |
| Box quantity | 200 |
Rainbow Bio Wrap Tree and Hedge Guards 50 - 60cm length (Box of 200) FAQs
What size is this product?
The stated size is 60cm. How many are supplied?
This product is supplied in a box of 200. What are tree shelters and guards used for?
They help protect young plants from browsing and physical damage while they establish. Should guards be checked after planting?
Yes. Check stability, plant growth and any contact with the stem, adjusting or removing the guard when appropriate. Do tree guards replace watering and weed control?
No. Young plants still need appropriate watering, weed management and establishment care.
Rainbow Bio Wrap Tree and Hedge Guards 50 - 75cm length (Box of 200)
26858
£268.58
Unit price per
Please sign in to see pricing
Rainbow Bio Wrap Tree and Hedge Guards 50 - 75cm length (Box of 200)
26858
£268.58
Unit price per
Please sign in to see pricing
The Rainbow Bio Wrap Tree and Hedge Guards 50 - 75cm length (Box of 200) is a tree & hedge guard designed for protecting young trees and hedge plants during establishment.
It is suited to professional landscaping, nursery and establishment work where the product's size and format match the planting or site requirements.
Supplied as: box of 200.
Key benefits
- Designed for protecting young trees and hedge plants during establishment
- Suitable for professional landscaping and horticultural use
- Stated size: 75cm
- Box quantity: 200
Protecting young trees & shrubs
Install the shelter or guard so it is stable and correctly positioned around the young plant without rubbing or constricting the stem. Use suitable stakes or supports where the system requires them.
Inspect guards periodically as the plant grows and remove, adjust or replace them when they are damaged or no longer required.
Professional establishment & maintenance
Successful landscape establishment depends on more than the protection product alone. Check plant stability, watering, weed competition and general plant condition regularly during the establishment period.
Rainbow Bio Wrap Tree and Hedge Guards 50 - 75cm length (Box of 200) product details
| Brand | Rainbow |
|---|---|
| Product type | Tree & hedge guard |
| Primary use | protecting young trees and hedge plants during establishment |
| Stated size | 75cm |
| Box quantity | 200 |
Rainbow Bio Wrap Tree and Hedge Guards 50 - 75cm length (Box of 200) FAQs
What size is this product?
The stated size is 75cm. How many are supplied?
This product is supplied in a box of 200. What are tree shelters and guards used for?
They help protect young plants from browsing and physical damage while they establish. Should guards be checked after planting?
Yes. Check stability, plant growth and any contact with the stem, adjusting or removing the guard when appropriate. Do tree guards replace watering and weed control?
No. Young plants still need appropriate watering, weed management and establishment care.
Rainbow Spiral Tree Guards 45cm (18") x 38mm - CLEAR (Box of 250)
7620
£76.20
Unit price per
Please sign in to see pricing
Rainbow Spiral Tree Guards 45cm (18") x 38mm - CLEAR (Box of 250)
7620
£76.20
Unit price per
Please sign in to see pricing
The Rainbow Spiral Tree Guards 45cm (18") x 38mm - CLEAR (Box of 250) is a spiral tree guard designed for protecting young tree stems from browsing and physical damage.
It is suited to professional landscaping, nursery and establishment work where the product's size and format match the planting or site requirements.
Supplied as: box of 250.
Key benefits
- Designed for protecting young tree stems from browsing and physical damage
- Suitable for professional landscaping and horticultural use
- Stated size: 45cm (18") x 38mm
- Box quantity: 250
Protecting young trees & shrubs
Install the shelter or guard so it is stable and correctly positioned around the young plant without rubbing or constricting the stem. Use suitable stakes or supports where the system requires them.
Inspect guards periodically as the plant grows and remove, adjust or replace them when they are damaged or no longer required.
Professional establishment & maintenance
Successful landscape establishment depends on more than the protection product alone. Check plant stability, watering, weed competition and general plant condition regularly during the establishment period.
Rainbow Spiral Tree Guards 45cm (18") x 38mm - CLEAR (Box of 250) product details
| Brand | Rainbow |
|---|---|
| Product type | Spiral tree guard |
| Primary use | protecting young tree stems from browsing and physical damage |
| Stated size | 45cm (18") x 38mm |
| Box quantity | 250 |
Rainbow Spiral Tree Guards 45cm (18") x 38mm - CLEAR (Box of 250) FAQs
What size is this product?
The stated size is 45cm (18") x 38mm. How many are supplied?
This product is supplied in a box of 250. What are tree shelters and guards used for?
They help protect young plants from browsing and physical damage while they establish. Should guards be checked after planting?
Yes. Check stability, plant growth and any contact with the stem, adjusting or removing the guard when appropriate. Do tree guards replace watering and weed control?
No. Young plants still need appropriate watering, weed management and establishment care.
Rainbow Spiral Tree Guards 45cm (18") x 50mm - CLEAR (Box of 250)
11788
£117.88
Unit price per
Please sign in to see pricing
Rainbow Spiral Tree Guards 45cm (18") x 50mm - CLEAR (Box of 250)
11788
£117.88
Unit price per
Please sign in to see pricing
The Rainbow Spiral Tree Guards 45cm (18") x 50mm - CLEAR (Box of 250) is a spiral tree guard designed for protecting young tree stems from browsing and physical damage.
It is suited to professional landscaping, nursery and establishment work where the product's size and format match the planting or site requirements.
Supplied as: box of 250.
Key benefits
- Designed for protecting young tree stems from browsing and physical damage
- Suitable for professional landscaping and horticultural use
- Stated size: 45cm (18") x 50mm
- Box quantity: 250
Protecting young trees & shrubs
Install the shelter or guard so it is stable and correctly positioned around the young plant without rubbing or constricting the stem. Use suitable stakes or supports where the system requires them.
Inspect guards periodically as the plant grows and remove, adjust or replace them when they are damaged or no longer required.
Professional establishment & maintenance
Successful landscape establishment depends on more than the protection product alone. Check plant stability, watering, weed competition and general plant condition regularly during the establishment period.
Rainbow Spiral Tree Guards 45cm (18") x 50mm - CLEAR (Box of 250) product details
| Brand | Rainbow |
|---|---|
| Product type | Spiral tree guard |
| Primary use | protecting young tree stems from browsing and physical damage |
| Stated size | 45cm (18") x 50mm |
| Box quantity | 250 |
Rainbow Spiral Tree Guards 45cm (18") x 50mm - CLEAR (Box of 250) FAQs
What size is this product?
The stated size is 45cm (18") x 50mm. How many are supplied?
This product is supplied in a box of 250. What are tree shelters and guards used for?
They help protect young plants from browsing and physical damage while they establish. Should guards be checked after planting?
Yes. Check stability, plant growth and any contact with the stem, adjusting or removing the guard when appropriate. Do tree guards replace watering and weed control?
No. Young plants still need appropriate watering, weed management and establishment care.
Rainbow Spiral Tree Guards 60cm (24") x 38mm - CLEAR (Box of 250)
9390
£93.90
Unit price per
Please sign in to see pricing
Rainbow Spiral Tree Guards 60cm (24") x 38mm - CLEAR (Box of 250)
9390
£93.90
Unit price per
Please sign in to see pricing
The Rainbow Spiral Tree Guards 60cm (24") x 38mm - CLEAR (Box of 250) is a spiral tree guard designed for protecting young tree stems from browsing and physical damage.
It is suited to professional landscaping, nursery and establishment work where the product's size and format match the planting or site requirements.
Supplied as: box of 250.
Key benefits
- Designed for protecting young tree stems from browsing and physical damage
- Suitable for professional landscaping and horticultural use
- Stated size: 60cm (24") x 38mm
- Box quantity: 250
Protecting young trees & shrubs
Install the shelter or guard so it is stable and correctly positioned around the young plant without rubbing or constricting the stem. Use suitable stakes or supports where the system requires them.
Inspect guards periodically as the plant grows and remove, adjust or replace them when they are damaged or no longer required.
Professional establishment & maintenance
Successful landscape establishment depends on more than the protection product alone. Check plant stability, watering, weed competition and general plant condition regularly during the establishment period.
Rainbow Spiral Tree Guards 60cm (24") x 38mm - CLEAR (Box of 250) product details
| Brand | Rainbow |
|---|---|
| Product type | Spiral tree guard |
| Primary use | protecting young tree stems from browsing and physical damage |
| Stated size | 60cm (24") x 38mm |
| Box quantity | 250 |
Rainbow Spiral Tree Guards 60cm (24") x 38mm - CLEAR (Box of 250) FAQs
What size is this product?
The stated size is 60cm (24") x 38mm. How many are supplied?
This product is supplied in a box of 250. What are tree shelters and guards used for?
They help protect young plants from browsing and physical damage while they establish. Should guards be checked after planting?
Yes. Check stability, plant growth and any contact with the stem, adjusting or removing the guard when appropriate. Do tree guards replace watering and weed control?
No. Young plants still need appropriate watering, weed management and establishment care.
Rainbow Spiral Tree Guards 60cm (24") x 50mm - CLEAR (Box of 250)
12299
£122.99
Unit price per
Please sign in to see pricing
Rainbow Spiral Tree Guards 60cm (24") x 50mm - CLEAR (Box of 250)
12299
£122.99
Unit price per
Please sign in to see pricing
The Rainbow Spiral Tree Guards 60cm (24") x 50mm - CLEAR (Box of 250) is a spiral tree guard designed for protecting young tree stems from browsing and physical damage.
It is suited to professional landscaping, nursery and establishment work where the product's size and format match the planting or site requirements.
Supplied as: box of 250.
Key benefits
- Designed for protecting young tree stems from browsing and physical damage
- Suitable for professional landscaping and horticultural use
- Stated size: 60cm (24") x 50mm
- Box quantity: 250
Protecting young trees & shrubs
Install the shelter or guard so it is stable and correctly positioned around the young plant without rubbing or constricting the stem. Use suitable stakes or supports where the system requires them.
Inspect guards periodically as the plant grows and remove, adjust or replace them when they are damaged or no longer required.
Professional establishment & maintenance
Successful landscape establishment depends on more than the protection product alone. Check plant stability, watering, weed competition and general plant condition regularly during the establishment period.
Rainbow Spiral Tree Guards 60cm (24") x 50mm - CLEAR (Box of 250) product details
| Brand | Rainbow |
|---|---|
| Product type | Spiral tree guard |
| Primary use | protecting young tree stems from browsing and physical damage |
| Stated size | 60cm (24") x 50mm |
| Box quantity | 250 |
Rainbow Spiral Tree Guards 60cm (24") x 50mm - CLEAR (Box of 250) FAQs
What size is this product?
The stated size is 60cm (24") x 50mm. How many are supplied?
This product is supplied in a box of 250. What are tree shelters and guards used for?
They help protect young plants from browsing and physical damage while they establish. Should guards be checked after planting?
Yes. Check stability, plant growth and any contact with the stem, adjusting or removing the guard when appropriate. Do tree guards replace watering and weed control?
No. Young plants still need appropriate watering, weed management and establishment care.
Rainbow Spiral Tree Guards 75cm (30") x 38mm - CLEAR (Box of 250)
12240
£122.40
Unit price per
Please sign in to see pricing
Rainbow Spiral Tree Guards 75cm (30") x 38mm - CLEAR (Box of 250)
12240
£122.40
Unit price per
Please sign in to see pricing
The Rainbow Spiral Tree Guards 75cm (30") x 38mm - CLEAR (Box of 250) is a spiral tree guard designed for protecting young tree stems from browsing and physical damage.
It is suited to professional landscaping, nursery and establishment work where the product's size and format match the planting or site requirements.
Supplied as: box of 250.
Key benefits
- Designed for protecting young tree stems from browsing and physical damage
- Suitable for professional landscaping and horticultural use
- Stated size: 75cm (30") x 38mm
- Box quantity: 250
Protecting young trees & shrubs
Install the shelter or guard so it is stable and correctly positioned around the young plant without rubbing or constricting the stem. Use suitable stakes or supports where the system requires them.
Inspect guards periodically as the plant grows and remove, adjust or replace them when they are damaged or no longer required.
Professional establishment & maintenance
Successful landscape establishment depends on more than the protection product alone. Check plant stability, watering, weed competition and general plant condition regularly during the establishment period.
Rainbow Spiral Tree Guards 75cm (30") x 38mm - CLEAR (Box of 250) product details
| Brand | Rainbow |
|---|---|
| Product type | Spiral tree guard |
| Primary use | protecting young tree stems from browsing and physical damage |
| Stated size | 75cm (30") x 38mm |
| Box quantity | 250 |
Rainbow Spiral Tree Guards 75cm (30") x 38mm - CLEAR (Box of 250) FAQs
What size is this product?
The stated size is 75cm (30") x 38mm. How many are supplied?
This product is supplied in a box of 250. What are tree shelters and guards used for?
They help protect young plants from browsing and physical damage while they establish. Should guards be checked after planting?
Yes. Check stability, plant growth and any contact with the stem, adjusting or removing the guard when appropriate. Do tree guards replace watering and weed control?
No. Young plants still need appropriate watering, weed management and establishment care.
Rainbow Spiral Tree Guards 75cm (30") x 50mm - CLEAR (Box of 250)
16309
£163.09
Unit price per
Please sign in to see pricing
Rainbow Spiral Tree Guards 75cm (30") x 50mm - CLEAR (Box of 250)
16309
£163.09
Unit price per
Please sign in to see pricing
The Rainbow Spiral Tree Guards 75cm (30") x 50mm - CLEAR (Box of 250) is a spiral tree guard designed for protecting young tree stems from browsing and physical damage.
It is suited to professional landscaping, nursery and establishment work where the product's size and format match the planting or site requirements.
Supplied as: box of 250.
Key benefits
- Designed for protecting young tree stems from browsing and physical damage
- Suitable for professional landscaping and horticultural use
- Stated size: 75cm (30") x 50mm
- Box quantity: 250
Protecting young trees & shrubs
Install the shelter or guard so it is stable and correctly positioned around the young plant without rubbing or constricting the stem. Use suitable stakes or supports where the system requires them.
Inspect guards periodically as the plant grows and remove, adjust or replace them when they are damaged or no longer required.
Professional establishment & maintenance
Successful landscape establishment depends on more than the protection product alone. Check plant stability, watering, weed competition and general plant condition regularly during the establishment period.
Rainbow Spiral Tree Guards 75cm (30") x 50mm - CLEAR (Box of 250) product details
| Brand | Rainbow |
|---|---|
| Product type | Spiral tree guard |
| Primary use | protecting young tree stems from browsing and physical damage |
| Stated size | 75cm (30") x 50mm |
| Box quantity | 250 |
Rainbow Spiral Tree Guards 75cm (30") x 50mm - CLEAR (Box of 250) FAQs
What size is this product?
The stated size is 75cm (30") x 50mm. How many are supplied?
This product is supplied in a box of 250. What are tree shelters and guards used for?
They help protect young plants from browsing and physical damage while they establish. Should guards be checked after planting?
Yes. Check stability, plant growth and any contact with the stem, adjusting or removing the guard when appropriate. Do tree guards replace watering and weed control?
No. Young plants still need appropriate watering, weed management and establishment care.
Rainbow Terra Biodegradable Tree Shelter 1.2m (Box of 60)
37505
£375.05
Unit price per
Please sign in to see pricing
Rainbow Terra Biodegradable Tree Shelter 1.2m (Box of 60)
37505
£375.05
Unit price per
Please sign in to see pricing
The Rainbow Terra Biodegradable Tree Shelter 1.2m (Box of 60) is a biodegradable tree shelter designed for protecting young trees during establishment.
It is suited to professional landscaping, nursery and establishment work where the product's size and format match the planting or site requirements.
Supplied as: box of 60.
Key benefits
- Designed for protecting young trees during establishment
- Suitable for professional landscaping and horticultural use
- Stated size: 1.2m
- Box quantity: 60
Protecting young trees & shrubs
Install the shelter or guard so it is stable and correctly positioned around the young plant without rubbing or constricting the stem. Use suitable stakes or supports where the system requires them.
Inspect guards periodically as the plant grows and remove, adjust or replace them when they are damaged or no longer required.
Professional establishment & maintenance
Successful landscape establishment depends on more than the protection product alone. Check plant stability, watering, weed competition and general plant condition regularly during the establishment period.
Rainbow Terra Biodegradable Tree Shelter 1.2m (Box of 60) product details
| Brand | Rainbow |
|---|---|
| Product type | Biodegradable tree shelter |
| Primary use | protecting young trees during establishment |
| Stated size | 1.2m |
| Box quantity | 60 |
Rainbow Terra Biodegradable Tree Shelter 1.2m (Box of 60) FAQs
What size is this product?
The stated size is 1.2m. How many are supplied?
This product is supplied in a box of 60. What are tree shelters and guards used for?
They help protect young plants from browsing and physical damage while they establish. Should guards be checked after planting?
Yes. Check stability, plant growth and any contact with the stem, adjusting or removing the guard when appropriate. Do tree guards replace watering and weed control?
No. Young plants still need appropriate watering, weed management and establishment care.
Rainbow Terra Biodegradable Tree Shelter 1.5m (Box of 500)
414000
£4,140.00
Unit price per
Please sign in to see pricing
Rainbow Terra Biodegradable Tree Shelter 1.5m (Box of 500)
414000
£4,140.00
Unit price per
Please sign in to see pricing
The Rainbow Terra Biodegradable Tree Shelter 1.5m (Box of 500) is a biodegradable tree shelter designed for protecting young trees during establishment.
It is suited to professional landscaping, nursery and establishment work where the product's size and format match the planting or site requirements.
Supplied as: box of 500.
Key benefits
- Designed for protecting young trees during establishment
- Suitable for professional landscaping and horticultural use
- Stated size: 1.5m
- Box quantity: 500
Protecting young trees & shrubs
Install the shelter or guard so it is stable and correctly positioned around the young plant without rubbing or constricting the stem. Use suitable stakes or supports where the system requires them.
Inspect guards periodically as the plant grows and remove, adjust or replace them when they are damaged or no longer required.
Professional establishment & maintenance
Successful landscape establishment depends on more than the protection product alone. Check plant stability, watering, weed competition and general plant condition regularly during the establishment period.
Rainbow Terra Biodegradable Tree Shelter 1.5m (Box of 500) product details
| Brand | Rainbow |
|---|---|
| Product type | Biodegradable tree shelter |
| Primary use | protecting young trees during establishment |
| Stated size | 1.5m |
| Box quantity | 500 |
Rainbow Terra Biodegradable Tree Shelter 1.5m (Box of 500) FAQs
What size is this product?
The stated size is 1.5m. How many are supplied?
This product is supplied in a box of 500. What are tree shelters and guards used for?
They help protect young plants from browsing and physical damage while they establish. Should guards be checked after planting?
Yes. Check stability, plant growth and any contact with the stem, adjusting or removing the guard when appropriate. Do tree guards replace watering and weed control?
No. Young plants still need appropriate watering, weed management and establishment care.
Rainbow Terra Biodegradable Tree Shelter 60cm (Box of 120)
44638
£446.38
Unit price per
Please sign in to see pricing
Rainbow Terra Biodegradable Tree Shelter 60cm (Box of 120)
44638
£446.38
Unit price per
Please sign in to see pricing
The Rainbow Terra Biodegradable Tree Shelter 60cm (Box of 120) is a biodegradable tree shelter designed for protecting young trees during establishment.
It is suited to professional landscaping, nursery and establishment work where the product's size and format match the planting or site requirements.
Supplied as: box of 120.
Key benefits
- Designed for protecting young trees during establishment
- Suitable for professional landscaping and horticultural use
- Stated size: 60cm
- Box quantity: 120
Protecting young trees & shrubs
Install the shelter or guard so it is stable and correctly positioned around the young plant without rubbing or constricting the stem. Use suitable stakes or supports where the system requires them.
Inspect guards periodically as the plant grows and remove, adjust or replace them when they are damaged or no longer required.
Professional establishment & maintenance
Successful landscape establishment depends on more than the protection product alone. Check plant stability, watering, weed competition and general plant condition regularly during the establishment period.
Rainbow Terra Biodegradable Tree Shelter 60cm (Box of 120) product details
| Brand | Rainbow |
|---|---|
| Product type | Biodegradable tree shelter |
| Primary use | protecting young trees during establishment |
| Stated size | 60cm |
| Box quantity | 120 |
Rainbow Terra Biodegradable Tree Shelter 60cm (Box of 120) FAQs
What size is this product?
The stated size is 60cm. How many are supplied?
This product is supplied in a box of 120. What are tree shelters and guards used for?
They help protect young plants from browsing and physical damage while they establish. Should guards be checked after planting?
Yes. Check stability, plant growth and any contact with the stem, adjusting or removing the guard when appropriate. Do tree guards replace watering and weed control?
No. Young plants still need appropriate watering, weed management and establishment care.
Rainbow Terra Biodegradable Tree Shelter 75cm (Box of 64)
29251
£292.51
Unit price per
Please sign in to see pricing
Rainbow Terra Biodegradable Tree Shelter 75cm (Box of 64)
29251
£292.51
Unit price per
Please sign in to see pricing
The Rainbow Terra Biodegradable Tree Shelter 75cm (Box of 64) is a biodegradable tree shelter designed for protecting young trees during establishment.
It is suited to professional landscaping, nursery and establishment work where the product's size and format match the planting or site requirements.
Supplied as: box of 64.
Key benefits
- Designed for protecting young trees during establishment
- Suitable for professional landscaping and horticultural use
- Stated size: 75cm
- Box quantity: 64
Protecting young trees & shrubs
Install the shelter or guard so it is stable and correctly positioned around the young plant without rubbing or constricting the stem. Use suitable stakes or supports where the system requires them.
Inspect guards periodically as the plant grows and remove, adjust or replace them when they are damaged or no longer required.
Professional establishment & maintenance
Successful landscape establishment depends on more than the protection product alone. Check plant stability, watering, weed competition and general plant condition regularly during the establishment period.
Rainbow Terra Biodegradable Tree Shelter 75cm (Box of 64) product details
| Brand | Rainbow |
|---|---|
| Product type | Biodegradable tree shelter |
| Primary use | protecting young trees during establishment |
| Stated size | 75cm |
| Box quantity | 64 |
Rainbow Terra Biodegradable Tree Shelter 75cm (Box of 64) FAQs
What size is this product?
The stated size is 75cm. How many are supplied?
This product is supplied in a box of 64. What are tree shelters and guards used for?
They help protect young plants from browsing and physical damage while they establish. Should guards be checked after planting?
Yes. Check stability, plant growth and any contact with the stem, adjusting or removing the guard when appropriate. Do tree guards replace watering and weed control?
No. Young plants still need appropriate watering, weed management and establishment care.
Rambridge Blossom Blood Flowering Additive – 300g
8400
£84.00
Unit price per
Please sign in to see pricing
Rambridge Blossom Blood Flowering Additive – 300g
8400
£84.00
Unit price per
Please sign in to see pricing
A highly concentrated flowering additive designed to stabilise pH during bloom and support fuller flower development.
Rambridge Blossom Blood is a specialist flowering additive developed for use once flowers are established. Rather than acting as another conventional plant food, Blossom Blood uses a specific type of pH buffer salt to help maintain the acidic conditions required during flowering.
This makes it easy to incorporate alongside an existing quality nutrient programme without replacing your normal base feed. It was developed for hydroponic applications and can also be used with soil and soilless growing media.
Blossom Blood is extremely concentrated. Just 1g treats 10 litres of hydroponic nutrient solution, giving a 300g tub enough product to prepare up to 3,000 litres at the full published application rate.
Why choose Blossom Blood?
- Specialist flowering additive – developed specifically for use during the flowering stage.
- Selective pH control – uses a specialised pH buffer salt to help maintain acidic conditions during flowering.
- Supports fuller flower development – designed to promote floral production once flowers are established.
- Highly concentrated – only 1g is required per 10L of hydroponic nutrient solution at full strength.
- Treats up to 3,000 litres – one 300g tub provides a substantial volume of working solution.
- Works alongside your base nutrients – compatible with quality nutrient programmes rather than replacing them.
- Suitable for different growing methods – established directions cover hydroponic and soil applications.
What is Blossom Blood used for?
Blossom Blood is intended for the flowering stage, once flower buds are well established. Its role is different from a conventional bloom fertiliser. The formulation is based around pH buffering, helping maintain suitable acidic conditions during this important stage of plant development.
It is particularly well suited to hydroponic growers, where it can be mixed directly into the nutrient reservoir. Blossom Blood can also be used with soil-grown plants at the appropriate lower concentration.
Because Blossom Blood is an additive rather than a complete plant food, continue using your normal base nutrient programme alongside it.
How to use Blossom Blood
Begin using Blossom Blood when flower buds are well established. Mix thoroughly into the nutrient solution and always measure the small quantity required carefully.
Hydroponics: Mix 1g of Blossom Blood into every 10 litres of nutrient solution. The published directions recommend beginning at half this amount and assessing the plant response before progressing to full strength.
Soil: Dissolve 1g into 20 litres of water. Apply approximately 500ml of the prepared solution per plant once flower buds are established.
Published directions recommend repeating the application after approximately two weeks or at the next nutrient change. Mix thoroughly before use. Blossom Blood is intended for root-zone application and should not be used as a foliar spray.
Blossom Blood 300g product details
| Product | Rambridge Blossom Blood |
|---|---|
| Product type | Flowering pH-buffer additive |
| Size | 300g |
| Form | Concentrated powder |
| Growth stage | Flowering |
| Hydroponic dosage | 1g per 10L of nutrient solution at full strength |
| Soil dilution | 1g per 20L of water |
| Soil application | Approximately 500ml of prepared solution per plant |
| Coverage | Up to 3,000L of hydroponic nutrient solution |
| Suitable for | Hydroponic, soil & soilless growing |
| Foliar application | No |
| Complete plant food | No – use alongside an appropriate base nutrient programme |
| Outer case quantity | 12 |
Blossom Blood FAQs
What does Blossom Blood do?
Blossom Blood is a specialist flowering additive designed to help stabilise acidic pH conditions during bloom. It is used once flowers are established to support floral production and fuller flower development.
Is Blossom Blood a fertiliser?
No. Blossom Blood is a specialised pH-buffer additive rather than a conventional plant food. It is designed to be used alongside a quality base nutrient programme.
When should I start using Blossom Blood?
Start using Blossom Blood once flower buds are well established. It is specifically intended for the flowering stage rather than vegetative growth.
How much Blossom Blood should I use in hydroponics?
The full published rate is 1g per 10 litres of nutrient solution. The directions recommend starting at half strength because plant response can vary.
How much solution will a 300g tub of Blossom Blood make?
At the full hydroponic application rate of 1g per 10 litres, a 300g tub can treat up to 3,000 litres of nutrient solution.
Can Blossom Blood be used in soil?
Yes. For soil applications, dissolve 1g of Blossom Blood into 20 litres of water and apply approximately 500ml of the prepared solution per plant once flower buds are established.
Can Blossom Blood be used with other nutrients?
Yes. Blossom Blood is designed as an additive and is compatible with quality nutrient programmes. Continue using an appropriate base nutrient alongside it.
Can Blossom Blood be used as a foliar spray?
No. Blossom Blood should not be used as a foliar spray. Apply it through the nutrient solution or root zone according to the appropriate growing method.
Is Blossom Blood a PK booster?
No. Blossom Blood should not be confused with a conventional high-phosphorus and high-potassium bloom fertiliser. Its principal function is as a specialist pH-buffer additive for the flowering stage.
Rhizopon Chryzoplus Grey 0.8% Rooting Powder - 350g
8087
£80.87
Unit price per
Please sign in to see pricing
Rhizopon Chryzoplus Grey 0.8% Rooting Powder - 350g
8087
£80.87
Unit price per
Please sign in to see pricing
Rhizopon Chryzoplus Grey 0.8% Rooting Powder - 350g is a ready-to-use rooting powder containing indolylbutyric acid (IBA), designed to stimulate root formation in ornamental plant cuttings.
This professional 350g format should be selected according to the crop and cutting material using the current Rhizopon rooting guide and product label.
Key benefits
- Ready-to-use rooting powder
- IBA concentration: 0.8%
- GB professional product reference: MAPP 17569
- For ornamental plant production / propagating material
- 350g pack
Choosing the correct Rhizopon powder
Rhizopon produces rooting powders at different IBA concentrations because different crops and cutting types can require different rooting strength. Do not select a product solely from a broad description such as softwood, semi-hardwood or hardwood; use the current Rhizopon rooting guide for the exact crop or variety.
Rhizopon recommends testing on a small number of cuttings when establishing a treatment programme.
Powder dip application
Chryzoplus Grey is supplied ready to use. Follow the current product label and Rhizopon powder-dip instructions for preparation and treatment. Avoid contaminating the main product container with plant material or moisture.
Application conditions and authorised uses can change, so the physical product label remains the controlling instruction for use.
Active ingredient & professional use
The verified concentration for this product is 0.8% IBA. Rhizopon identifies the professional Great Britain registration as MAPP 17569. Use must comply with the current authorisation, label and any applicable professional-use requirements.
Safety, handling & storage
Always read the current label and Safety Data Sheet before use. Follow the specified personal-protection, handling, storage and emergency requirements. Keep the product in its original labelled packaging and protect it from contamination.
Propagation management
Rooting powder is one part of successful propagation. Cutting quality, hygiene, growing medium, temperature, humidity, light and irrigation all influence rooting performance and crop uniformity.
Rhizopon Chryzoplus Grey 0.8% Rooting Powder - 350g product details
| Brand | Rhizopon |
|---|---|
| Product | Chryzoplus Grey |
| Product type | Ready-to-use rooting powder / plant growth regulator |
| Active substance | Indolylbutyric acid (IBA) |
| IBA concentration | 0.8% |
| Pack size | 350g |
| GB professional MAPP number | 17569 |
| Crop field | Ornamental plant production / propagating material |
Rhizopon Chryzoplus Grey 0.8% Rooting Powder - 350g FAQs
What is the IBA concentration?
This product contains 0.8% IBA. What is it used for?
It is a rooting powder / plant growth regulator for authorised use in ornamental plant propagation. Is the powder ready to use?
Yes. Rhizopon describes its powder range as ready to use; follow the current product label and application instructions. How do I know which Rhizopon powder to choose?
Use the current Rhizopon rooting guide for the exact crop or variety rather than relying only on a general cutting category. Should I test the product before treating a whole batch?
Rhizopon advises testing on a small number of cuttings when establishing the appropriate treatment. What MAPP number applies to this professional product?
The verified Great Britain professional product reference is 17569. Can I ignore the physical label if I have used the product before?
No. Rhizopon specifically advises checking the current label because authorised use can change. Where do I find safety information?
Use the current product label and Rhizopon Safety Data Sheet for handling, PPE, storage and emergency information. Does rooting powder replace good propagation conditions?
No. Cutting quality, hygiene, temperature, humidity, substrate, light and irrigation remain important. How should it be stored?
Follow the current label and SDS and keep the product in its original labelled packaging, protected from contamination.
Rhizopon Chryzopon Rose 0.1% Rooting Powder - 350g
6028
£60.28
Unit price per
Please sign in to see pricing
Rhizopon Chryzopon Rose 0.1% Rooting Powder - 350g
6028
£60.28
Unit price per
Please sign in to see pricing
Rhizopon Chryzopon Rose 0.1% Rooting Powder - 350g is a ready-to-use rooting powder containing indolylbutyric acid (IBA), designed to stimulate root formation in ornamental plant cuttings.
This professional 350g format should be selected according to the crop and cutting material using the current Rhizopon rooting guide and product label.
Key benefits
- Ready-to-use rooting powder
- IBA concentration: 0.1%
- GB professional product reference: MAPP 17566
- For ornamental plant production / propagating material
- 350g pack
Choosing the correct Rhizopon powder
Rhizopon produces rooting powders at different IBA concentrations because different crops and cutting types can require different rooting strength. Do not select a product solely from a broad description such as softwood, semi-hardwood or hardwood; use the current Rhizopon rooting guide for the exact crop or variety.
Rhizopon recommends testing on a small number of cuttings when establishing a treatment programme.
Powder dip application
Chryzopon Rose is supplied ready to use. Follow the current product label and Rhizopon powder-dip instructions for preparation and treatment. Avoid contaminating the main product container with plant material or moisture.
Application conditions and authorised uses can change, so the physical product label remains the controlling instruction for use.
Active ingredient & professional use
The verified concentration for this product is 0.1% IBA. Rhizopon identifies the professional Great Britain registration as MAPP 17566. Use must comply with the current authorisation, label and any applicable professional-use requirements.
Safety, handling & storage
Always read the current label and Safety Data Sheet before use. Follow the specified personal-protection, handling, storage and emergency requirements. Keep the product in its original labelled packaging and protect it from contamination.
Propagation management
Rooting powder is one part of successful propagation. Cutting quality, hygiene, growing medium, temperature, humidity, light and irrigation all influence rooting performance and crop uniformity.
Rhizopon Chryzopon Rose 0.1% Rooting Powder - 350g product details
| Brand | Rhizopon |
|---|---|
| Product | Chryzopon Rose |
| Product type | Ready-to-use rooting powder / plant growth regulator |
| Active substance | Indolylbutyric acid (IBA) |
| IBA concentration | 0.1% |
| Pack size | 350g |
| GB professional MAPP number | 17566 |
| Crop field | Ornamental plant production / propagating material |
Rhizopon Chryzopon Rose 0.1% Rooting Powder - 350g FAQs
What is the IBA concentration?
This product contains 0.1% IBA. What is it used for?
It is a rooting powder / plant growth regulator for authorised use in ornamental plant propagation. Is the powder ready to use?
Yes. Rhizopon describes its powder range as ready to use; follow the current product label and application instructions. How do I know which Rhizopon powder to choose?
Use the current Rhizopon rooting guide for the exact crop or variety rather than relying only on a general cutting category. Should I test the product before treating a whole batch?
Rhizopon advises testing on a small number of cuttings when establishing the appropriate treatment. What MAPP number applies to this professional product?
The verified Great Britain professional product reference is 17566. Can I ignore the physical label if I have used the product before?
No. Rhizopon specifically advises checking the current label because authorised use can change. Where do I find safety information?
Use the current product label and Rhizopon Safety Data Sheet for handling, PPE, storage and emergency information. Does rooting powder replace good propagation conditions?
No. Cutting quality, hygiene, temperature, humidity, substrate, light and irrigation remain important. How should it be stored?
Follow the current label and SDS and keep the product in its original labelled packaging, protected from contamination.
Rhizopon Chryzotop Green 0.25% Rooting Powder - 350g
6512
£65.12
Unit price per
Please sign in to see pricing
Rhizopon Chryzotop Green 0.25% Rooting Powder - 350g
6512
£65.12
Unit price per
Please sign in to see pricing
Rhizopon Chryzotop Green 0.25% Rooting Powder - 350g is a ready-to-use rooting powder containing indolylbutyric acid (IBA), designed to stimulate root formation in ornamental plant cuttings.
This professional 350g format should be selected according to the crop and cutting material using the current Rhizopon rooting guide and product label.
Key benefits
- Ready-to-use rooting powder
- IBA concentration: 0.25%
- GB professional product reference: MAPP 17567
- For ornamental plant production / propagating material
- 350g pack
Choosing the correct Rhizopon powder
Rhizopon produces rooting powders at different IBA concentrations because different crops and cutting types can require different rooting strength. Do not select a product solely from a broad description such as softwood, semi-hardwood or hardwood; use the current Rhizopon rooting guide for the exact crop or variety.
Rhizopon recommends testing on a small number of cuttings when establishing a treatment programme.
Powder dip application
Chryzotop Green is supplied ready to use. Follow the current product label and Rhizopon powder-dip instructions for preparation and treatment. Avoid contaminating the main product container with plant material or moisture.
Application conditions and authorised uses can change, so the physical product label remains the controlling instruction for use.
Active ingredient & professional use
The verified concentration for this product is 0.25% IBA. Rhizopon identifies the professional Great Britain registration as MAPP 17567. Use must comply with the current authorisation, label and any applicable professional-use requirements.
Safety, handling & storage
Always read the current label and Safety Data Sheet before use. Follow the specified personal-protection, handling, storage and emergency requirements. Keep the product in its original labelled packaging and protect it from contamination.
Propagation management
Rooting powder is one part of successful propagation. Cutting quality, hygiene, growing medium, temperature, humidity, light and irrigation all influence rooting performance and crop uniformity.
Rhizopon Chryzotop Green 0.25% Rooting Powder - 350g product details
| Brand | Rhizopon |
|---|---|
| Product | Chryzotop Green |
| Product type | Ready-to-use rooting powder / plant growth regulator |
| Active substance | Indolylbutyric acid (IBA) |
| IBA concentration | 0.25% |
| Pack size | 350g |
| GB professional MAPP number | 17567 |
| Crop field | Ornamental plant production / propagating material |
Rhizopon Chryzotop Green 0.25% Rooting Powder - 350g FAQs
What is the IBA concentration?
This product contains 0.25% IBA. What is it used for?
It is a rooting powder / plant growth regulator for authorised use in ornamental plant propagation. Is the powder ready to use?
Yes. Rhizopon describes its powder range as ready to use; follow the current product label and application instructions. How do I know which Rhizopon powder to choose?
Use the current Rhizopon rooting guide for the exact crop or variety rather than relying only on a general cutting category. Should I test the product before treating a whole batch?
Rhizopon advises testing on a small number of cuttings when establishing the appropriate treatment. What MAPP number applies to this professional product?
The verified Great Britain professional product reference is 17567. Can I ignore the physical label if I have used the product before?
No. Rhizopon specifically advises checking the current label because authorised use can change. Where do I find safety information?
Use the current product label and Rhizopon Safety Data Sheet for handling, PPE, storage and emergency information. Does rooting powder replace good propagation conditions?
No. Cutting quality, hygiene, temperature, humidity, substrate, light and irrigation remain important. How should it be stored?
Follow the current label and SDS and keep the product in its original labelled packaging, protected from contamination.