Plant Health

Botanixx Silicon - Built-In Strength, Right Where Your Plants Need It

Strong plants start with strong structure. That’s where Botanixx Silicon comes in. Doesn’t matter if you’re growing in polytunnels, under LEDs, or out in the open – this stuff gives your plants a bit more backbone. It’s not hype, either. The silicon helps them build firmer structure, pull in nutrients more efficiently, and cope better when things get tough – heat, light, pests, you name it.

You’ll see it in how they carry themselves. Upright, steady, feeding well and finishing strong.

It’s not about shortcuts. It’s about giving the plant what it needs to get on with the job. When the structure’s solid – strong stems, firm leaf, reliable roots – plants cope better. They stay upright, feed properly, and keep pushing on, even when conditions aren’t ideal.

Why growers use it:

• Builds natural strength from the inside out
• Helps crops hold shape without leaning on support
• Boosts uptake through healthier roots and tougher tissues
• Offers a line of defence against heat, drought, and light stress
• Makes leaves thicker and more efficient at converting light
• Reduces pest and disease pressure by toughening plant surfaces
• Helps limit heavy metal uptake, especially in sensitive crops
• Contributes to bigger, heavier yields without heavy lifting

Available in 500ml, 1L, 5L and 10L.
No gimmicks – just real support for serious growers.

Botanixx Silicon - Built-In Strength, Right Where Your Plants Need It

Strong plants start with strong structure. That’s where Botanixx Silicon comes in. Doesn’t matter if you’re growing in polytunnels, under LEDs, or out in the open – this stuff gives your plants a bit more backbone. It’s not hype, either. The silicon helps them build firmer structure, pull in nutrients more efficiently, and cope better when things get tough – heat, light, pests, you name it.

You’ll see it in how they carry themselves. Upright, steady, feeding well and finishing strong.

It’s not about shortcuts. It’s about giving the plant what it needs to get on with the job. When the structure’s solid – strong stems, firm leaf, reliable roots – plants cope better. They stay upright, feed properly, and keep pushing on, even when conditions aren’t ideal.

Why growers use it:

• Builds natural strength from the inside out
• Helps crops hold shape without leaning on support
• Boosts uptake through healthier roots and tougher tissues
• Offers a line of defence against heat, drought, and light stress
• Makes leaves thicker and more efficient at converting light
• Reduces pest and disease pressure by toughening plant surfaces
• Helps limit heavy metal uptake, especially in sensitive crops
• Contributes to bigger, heavier yields without heavy lifting

Available in 500ml, 1L, 5L and 10L.
No gimmicks – just real support for serious growers.

Botanixx Silicon - Built-In Strength, Right Where Your Plants Need It

Strong plants start with strong structure. That’s where Botanixx Silicon comes in. Doesn’t matter if you’re growing in polytunnels, under LEDs, or out in the open – this stuff gives your plants a bit more backbone. It’s not hype, either. The silicon helps them build firmer structure, pull in nutrients more efficiently, and cope better when things get tough – heat, light, pests, you name it.

You’ll see it in how they carry themselves. Upright, steady, feeding well and finishing strong.

It’s not about shortcuts. It’s about giving the plant what it needs to get on with the job. When the structure’s solid – strong stems, firm leaf, reliable roots – plants cope better. They stay upright, feed properly, and keep pushing on, even when conditions aren’t ideal.

Why growers use it:

• Builds natural strength from the inside out
• Helps crops hold shape without leaning on support
• Boosts uptake through healthier roots and tougher tissues
• Offers a line of defence against heat, drought, and light stress
• Makes leaves thicker and more efficient at converting light
• Reduces pest and disease pressure by toughening plant surfaces
• Helps limit heavy metal uptake, especially in sensitive crops
• Contributes to bigger, heavier yields without heavy lifting

Available in 500ml, 1L, 5L and 10L.
No gimmicks – just real support for serious growers.

Botanixx Silicon - Built-In Strength, Right Where Your Plants Need It

Strong plants start with strong structure. That’s where Botanixx Silicon comes in. Doesn’t matter if you’re growing in polytunnels, under LEDs, or out in the open – this stuff gives your plants a bit more backbone. It’s not hype, either. The silicon helps them build firmer structure, pull in nutrients more efficiently, and cope better when things get tough – heat, light, pests, you name it.

You’ll see it in how they carry themselves. Upright, steady, feeding well and finishing strong.

It’s not about shortcuts. It’s about giving the plant what it needs to get on with the job. When the structure’s solid – strong stems, firm leaf, reliable roots – plants cope better. They stay upright, feed properly, and keep pushing on, even when conditions aren’t ideal.

Why growers use it:

• Builds natural strength from the inside out
• Helps crops hold shape without leaning on support
• Boosts uptake through healthier roots and tougher tissues
• Offers a line of defence against heat, drought, and light stress
• Makes leaves thicker and more efficient at converting light
• Reduces pest and disease pressure by toughening plant surfaces
• Helps limit heavy metal uptake, especially in sensitive crops
• Contributes to bigger, heavier yields without heavy lifting

Available in 500ml, 1L, 5L and 10L.
No gimmicks – just real support for serious growers.

Botanixx - pH Up – Reliable pH Control for Professional Growing

Low pH can quietly undermine a crop. Once it drops below 5.5, nutrient availability – particularly calcium, magnesium, and phosphorus – takes a hit. Plants start to show it: twisted leaves, weak roots, stalled growth, even when feed levels look right on paper.

Botanixx pH Up offers a clean, effective way to correct this. It raises pH steadily, without foaming, clouding, or affecting your system. No build-up, no waste – just a dependable correction that slots easily into any setup, from hydro and coco to flood and drain.

Why growers and resellers trust it:

• Supports calcium and magnesium uptake for stronger, more resilient plants
• Releases phosphorus for improved rooting and flowering performance
• Precise control with no chemical residue
• Compatible with all common commercial growing systems
• Highly stable formulation – clean, concentrated, and consistent

Ideal for use when:

• pH levels drop below 5.5 and uptake is compromised
• Visible signs of calcium or magnesium deficiency, despite feeding
• Runoff or reservoir readings consistently fall outside target range

Supplied in 500ml, 1L, 5L and 10L formats.
Reliable, trade-grade pH management for serious growers.

Botanixx - pH Up – Reliable pH Control for Professional Growing

Low pH can quietly undermine a crop. Once it drops below 5.5, nutrient availability – particularly calcium, magnesium, and phosphorus – takes a hit. Plants start to show it: twisted leaves, weak roots, stalled growth, even when feed levels look right on paper.

Botanixx pH Up offers a clean, effective way to correct this. It raises pH steadily, without foaming, clouding, or affecting your system. No build-up, no waste – just a dependable correction that slots easily into any setup, from hydro and coco to flood and drain.

Why growers and resellers trust it:

• Supports calcium and magnesium uptake for stronger, more resilient plants
• Releases phosphorus for improved rooting and flowering performance
• Precise control with no chemical residue
• Compatible with all common commercial growing systems
• Highly stable formulation – clean, concentrated, and consistent

Ideal for use when:

• pH levels drop below 5.5 and uptake is compromised
• Visible signs of calcium or magnesium deficiency, despite feeding
• Runoff or reservoir readings consistently fall outside target range

Supplied in 500ml, 1L, 5L and 10L formats.
Reliable, trade-grade pH management for serious growers.

Botanixx - pH Up – Reliable pH Control for Professional Growing

Low pH can quietly undermine a crop. Once it drops below 5.5, nutrient availability – particularly calcium, magnesium, and phosphorus – takes a hit. Plants start to show it: twisted leaves, weak roots, stalled growth, even when feed levels look right on paper.

Botanixx pH Up offers a clean, effective way to correct this. It raises pH steadily, without foaming, clouding, or affecting your system. No build-up, no waste – just a dependable correction that slots easily into any setup, from hydro and coco to flood and drain.

Why growers and resellers trust it:

• Supports calcium and magnesium uptake for stronger, more resilient plants
• Releases phosphorus for improved rooting and flowering performance
• Precise control with no chemical residue
• Compatible with all common commercial growing systems
• Highly stable formulation – clean, concentrated, and consistent

Ideal for use when:

• pH levels drop below 5.5 and uptake is compromised
• Visible signs of calcium or magnesium deficiency, despite feeding
• Runoff or reservoir readings consistently fall outside target range

Supplied in 500ml, 1L, 5L and 10L formats.
Reliable, trade-grade pH management for serious growers.

Botanixx - pH Down 30% – Keep Your pH Where It Should Be

If your mix starts creeping above 6.5, you’ve got a problem – micronutrients like iron, zinc and manganese stop being available to the plant. They’re in the tank, but locked out. That’s when the yellowing starts, growth slows, and yields begin to dip.

Botanixx pH Down gives you a clean, accurate fix. It lowers pH quickly, without any clouding, foaming or residue – just a stable adjustment that gets your nutrient solution back into the uptake zone.

It gets to work fast, drops the pH cleanly, and won’t leave behind any gunk, foam or haziness – just a tidy correction that keeps your feed where it should be.

So, why do growers stick with it?

• Brings down pH fast and accurately
• Keeps trace nutrients available for efficient uptake
• Won’t clog filters or leave residue in tanks
• Safe to use in hydro, coco, soil or foliar feeds
• High strength – minimal volume needed per dose

When to use it:

• pH reads over 6.5 – adjust before applying
• You’re seeing early signs of nutrient lockout
• You need tight pH control for coco runoff (aim 5.8–6.2)

Available in 500ml, 1L, 5L and 10L sizes.
Trade-friendly, consistent, and ready for commercial use.

Botanixx - pH Down 30% – Keep Your pH Where It Should Be

If your mix starts creeping above 6.5, you’ve got a problem – micronutrients like iron, zinc and manganese stop being available to the plant. They’re in the tank, but locked out. That’s when the yellowing starts, growth slows, and yields begin to dip.

Botanixx pH Down gives you a clean, accurate fix. It lowers pH quickly, without any clouding, foaming or residue – just a stable adjustment that gets your nutrient solution back into the uptake zone.

It gets to work fast, drops the pH cleanly, and won’t leave behind any gunk, foam or haziness – just a tidy correction that keeps your feed where it should be.

So, why do growers stick with it?

• Brings down pH fast and accurately
• Keeps trace nutrients available for efficient uptake
• Won’t clog filters or leave residue in tanks
• Safe to use in hydro, coco, soil or foliar feeds
• High strength – minimal volume needed per dose

When to use it:

• pH reads over 6.5 – adjust before applying
• You’re seeing early signs of nutrient lockout
• You need tight pH control for coco runoff (aim 5.8–6.2)

Available in 500ml, 1L, 5L and 10L sizes.
Trade-friendly, consistent, and ready for commercial use.

Botanixx - pH Down 30% – Keep Your pH Where It Should Be

If your mix starts creeping above 6.5, you’ve got a problem – micronutrients like iron, zinc and manganese stop being available to the plant. They’re in the tank, but locked out. That’s when the yellowing starts, growth slows, and yields begin to dip.

Botanixx pH Down gives you a clean, accurate fix. It lowers pH quickly, without any clouding, foaming or residue – just a stable adjustment that gets your nutrient solution back into the uptake zone.

It gets to work fast, drops the pH cleanly, and won’t leave behind any gunk, foam or haziness – just a tidy correction that keeps your feed where it should be.

So, why do growers stick with it?

• Brings down pH fast and accurately
• Keeps trace nutrients available for efficient uptake
• Won’t clog filters or leave residue in tanks
• Safe to use in hydro, coco, soil or foliar feeds
• High strength – minimal volume needed per dose

When to use it:

• pH reads over 6.5 – adjust before applying
• You’re seeing early signs of nutrient lockout
• You need tight pH control for coco runoff (aim 5.8–6.2)

Available in 500ml, 1L, 5L and 10L sizes.
Trade-friendly, consistent, and ready for commercial use.

Botanixx - pH Down 30% – Keep Your pH Where It Should Be

If your mix starts creeping above 6.5, you’ve got a problem – micronutrients like iron, zinc and manganese stop being available to the plant. They’re in the tank, but locked out. That’s when the yellowing starts, growth slows, and yields begin to dip.

Botanixx pH Down gives you a clean, accurate fix. It lowers pH quickly, without any clouding, foaming or residue – just a stable adjustment that gets your nutrient solution back into the uptake zone.

It gets to work fast, drops the pH cleanly, and won’t leave behind any gunk, foam or haziness – just a tidy correction that keeps your feed where it should be.

So, why do growers stick with it?

• Brings down pH fast and accurately
• Keeps trace nutrients available for efficient uptake
• Won’t clog filters or leave residue in tanks
• Safe to use in hydro, coco, soil or foliar feeds
• High strength – minimal volume needed per dose

When to use it:

• pH reads over 6.5 – adjust before applying
• You’re seeing early signs of nutrient lockout
• You need tight pH control for coco runoff (aim 5.8–6.2)

Available in 500ml, 1L, 5L and 10L sizes.
Trade-friendly, consistent, and ready for commercial use.

Botanixx - Oxygen 11.9% - Freshen and Protect Your Roots

Give your nutrient reservoir a breath of fresh air with Botanixx Oxygen. Just a few drops increase oxygen levels, helping roots grow stronger and plants thrive.

Why Choose

• Helps roots grow stronger and reach out further, so plants feed better
• Keeps root rot and nasty pathogens like Pythium in check
• Stops your water from going stale or smelly by keeping it oxygen-rich
• Supports healthy nutrient uptake so plants stay balanced and bounce back quicker
• Slows algae build-up to keep your tank clearer and cleaner
• Helps plants deal with heat and other environmental pressures
• Encourages sturdy stems and fuller leaf growth
• Breaks down waste and helps stop slimy biofilm in hydro systems
• Leads to better results – healthier plants, cleaner roots, and stronger yields

Available in 500ml, 1L, 5L, and 10L sizes.
An easy, effective way to improve root health in hydro or soil setups.

Botanixx - Oxygen 11.9% - Freshen and Protect Your Roots

Give your nutrient reservoir a breath of fresh air with Botanixx Oxygen. Just a few drops increase oxygen levels, helping roots grow stronger and plants thrive.

Why Choose

• Helps roots grow stronger and reach out further, so plants feed better
• Keeps root rot and nasty pathogens like Pythium in check
• Stops your water from going stale or smelly by keeping it oxygen-rich
• Supports healthy nutrient uptake so plants stay balanced and bounce back quicker
• Slows algae build-up to keep your tank clearer and cleaner
• Helps plants deal with heat and other environmental pressures
• Encourages sturdy stems and fuller leaf growth
• Breaks down waste and helps stop slimy biofilm in hydro systems
• Leads to better results – healthier plants, cleaner roots, and stronger yields

Available in 500ml, 1L, 5L, and 10L sizes.
An easy, effective way to improve root health in hydro or soil setups.

Botanixx - Oxygen 11.9% - Freshen and Protect Your Roots

Give your nutrient reservoir a breath of fresh air with Botanixx Oxygen. Just a few drops increase oxygen levels, helping roots grow stronger and plants thrive.

Why Choose

• Helps roots grow stronger and reach out further, so plants feed better
• Keeps root rot and nasty pathogens like Pythium in check
• Stops your water from going stale or smelly by keeping it oxygen-rich
• Supports healthy nutrient uptake so plants stay balanced and bounce back quicker
• Slows algae build-up to keep your tank clearer and cleaner
• Helps plants deal with heat and other environmental pressures
• Encourages sturdy stems and fuller leaf growth
• Breaks down waste and helps stop slimy biofilm in hydro systems
• Leads to better results – healthier plants, cleaner roots, and stronger yields

Available in 500ml, 1L, 5L, and 10L sizes.
An easy, effective way to improve root health in hydro or soil setups.

Botanixx - Oxygen 11.9% - Freshen and Protect Your Roots

Give your nutrient reservoir a breath of fresh air with Botanixx Oxygen. Just a few drops increase oxygen levels, helping roots grow stronger and plants thrive.

Why Choose

• Helps roots grow stronger and reach out further, so plants feed better
• Keeps root rot and nasty pathogens like Pythium in check
• Stops your water from going stale or smelly by keeping it oxygen-rich
• Supports healthy nutrient uptake so plants stay balanced and bounce back quicker
• Slows algae build-up to keep your tank clearer and cleaner
• Helps plants deal with heat and other environmental pressures
• Encourages sturdy stems and fuller leaf growth
• Breaks down waste and helps stop slimy biofilm in hydro systems
• Leads to better results – healthier plants, cleaner roots, and stronger yields

Available in 500ml, 1L, 5L, and 10L sizes.
An easy, effective way to improve root health in hydro or soil setups.

ETI pH Pal Plus Meter – Straightforward pH Testing You Can Trust

When you’re managing feeds or checking irrigation water, knowing your pH is bang-on matters. The ETI pH PAL Plus keeps that job quick and hassle-free. It’s small, solid, and does exactly what it’s supposed to – no fluff.

You just dip, press, and read. The screen’s clear, the calibration’s automatic, and it fits neatly in a pocket or tray. Whether you’re working in a nursery, polytunnel, or anywhere plants need precision, this little unit saves time and keeps things on point.

GROWERS OWN pH Meter – No-Fuss, Straightforward pH Testing

If you just need a pH meter that gets the job done without the bells and whistles, this one fits the bill. The is great for anyone running a small setup, short-term grow, or working to a tight budget. It’s simple, quick to use, and gives you the readings you need to stay on top of your nutrient mix.

Nothing fancy – just reliable pH checks that help you avoid lockouts and keep your plants ticking along nicely.

GROWERS OWN pH And Moisture Meter 2 in 1 Tester - Dual-purpose soil tester for quick pH and moisture checks

Designed for growers who value precision without overcomplication, the GROWERS OWN pH and Moisture Meter offers fast, reliable soil readings to help fine-tune growing conditions. This analogue 2-in-1 tester gives instant feedback on both soil acidity and moisture levels – ideal for checking compost mixes, open field beds, or container media. No batteries, no fuss – just practical, repeatable insights for managing nutrient availability and avoiding over- or under-watering in commercial horticulture settings.

Magnetic Wire Hook - Sticky trap hanger - Hook-type sticky trap holders for flexible trap placement

These hook-equipped trap holders allow easy mounting of sticky traps across different growing zones – from crop canopies to support structures. Made to accommodate a range of sticky trap formats, they help maximise trap visibility and optimise capture rates. An excellent utility for growers seeking to fine-tune trap positioning in diverse horticultural setups.

Delta traps with hook - Insect Traps (5 pieces) - Reusable delta trap for flying insect surveillance

These delta traps offer a sturdy and reusable solution for monitoring adult flying insects, including moths and leafminers, in conjunction with pheromone lures. Their open design and replaceable sticky inserts make them ideal for routine pest scouting in ornamentals, salad crops, and propagation environments. A reliable fixture for professional IPM programmes where visual monitoring guides decision-making.

Delta Traps Sticky Bases - Adhesive trapping surface (20 per pack) - Sticky liners for pheromone and delta traps

These replacement sticky inserts are designed to fit delta-style traps and pheromone lure stations. Offering excellent adhesive retention, they ensure consistent capture of targeted pest species like moths, whiteflies, or leafminers. Regular replacement helps maintain trap efficacy throughout the season and ensures accurate pest population monitoring over time.

Rollertraps Yellow 30cm x 100M (4 per box) - Large-scale yellow sticky trapping for flying insect control

The yellow 30cm x 100m roller trap is a trusted tool for long-term trapping of a range of flying pests including whitefly, aphids, leafminers, and thrips. Its extended length and high adhesion surface make it ideal for use in commercial production sites, where early pest identification is critical. Use along walkways, between crop rows, or in entrance zones to intercept pest ingress and reduce reliance on reactive measures.

Rollertraps Yellow 15cm x 100M (8 per box) - Large-scale yellow sticky trapping for flying insect control

The yellow 15cm x 100m roller trap is a trusted tool for long-term trapping of a range of flying pests including whitefly, aphids, leafminers, and thrips. Its extended length and high adhesion surface make it ideal for use in commercial production sites, where early pest identification is critical. Use along walkways, between crop rows, or in entrance zones to intercept pest ingress and reduce reliance on reactive measures.

Rollertraps Blue 30cm x 100M  - Blue sticky roller trap for thrips monitoring

These blue roller traps are a key component in professional thrips monitoring programmes. The 30cm x 100m format provides extensive coverage for glasshouses and propagation units, allowing consistent detection and population tracking of western flower thrips and other species. Ideal for use above benches, in hanging crops, or along structural supports, they support early intervention by giving clear visual indication of pest presence.

Rollertraps Blue 15cm x 100M  - Blue sticky roller trap for thrips monitoring

These blue roller traps are a key component in professional thrips monitoring programmes. The 15cm x 100m format provides extensive coverage for glasshouses and propagation units, allowing consistent detection and population tracking of western flower thrips and other species. Ideal for use above benches, in hanging crops, or along structural supports, they support early intervention by giving clear visual indication of pest presence.

NEMAslug (Phasmarhabditis) - Large-scale slug control for commercial field or glasshouse use

This high-volume tray of Phasmarhabditis hermaphrodita nematodes enables effective slug control across larger growing areas. Whether you’re managing tunnels of leafy veg or extensive ornamental beds, NEMAslug delivers invisible yet impactful protection. Apply with water via drench or irrigation and let the nematodes seek out slugs in the root zone. A go-to choice for growers needing dependable biological mollusc control in wetter climates.

• Main uses (guide) Slugs and Snails. 500mil per m2.

Delivery - order by 5pm on Wednesday for delivery the following week.

NEMAslug (Phasmarhabditis) - Biological slug control for professional growers

NEMAslug uses Phasmarhabditis hermaphrodita to control slugs below the soil surface, tackling the problem where pellets can’t reach. The 30 million tray is perfect for smaller cropping areas or trial applications in crops like lettuce, hostas, and ornamentals. Safe for pets, wildlife, and beneficial insects, NEMAslug offers a reliable, residue-free solution to protect foliage from slug grazing. Suitable for organic production and retail-sensitive markets.

• Main uses (guide) Slugs and Snails. 500mil per m2.

Delivery - order by 5pm on Wednesday for delivery the following week.

NEMAcontrol C (Steinernema carpocapsae) - Broad-spectrum biological control for soil and substrate pests

This 250 million nematode tray is ideal for growers dealing with persistent substrate pest issues in propagation and ornamental crops. Steinernema carpocapsae targets a range of larvae including fungus gnats (sciarids), shoreflies, and caterpillars such as cutworm. Easily applied via drench or irrigation, NEMAcontrol C supports chemical-free growing and healthier root zones. A smart fit for containerised production, propagation benches, and polytunnel systems.

• Main uses (guide) Caterpillars, Shorefly larvae, Capsids. 500mil per m2.

Delivery: All orders must be placed before Wednesday at 5pm, to guarantee delivery for the following week.

NEMAcontrol C (Steinernema carpocapsae) - Targeted control of caterpillars, shorefly and sciarid larvae in substrate

NEMAcontrol C features Steinernema carpocapsae, a versatile nematode effective against a range of soil-dwelling pests including cutworms, shoreflies, and sciarid larvae. The 50M tray suits propagation units or high-value crops with specific pest hotspots. Ideal for reducing substrate pests without chemical residues, it integrates seamlessly into IPM frameworks in propagation, nursery, and bedding production systems.

• Main uses (guide) Caterpillars, Shorefly larvae, Capsids. 500mil per m2.

Delivery: All orders must be placed before Wednesday at 5pm, to guarantee delivery for the following week.

FELTIcontrol (Feltiella acarisuga)

Main targets: Two-spotted spider mite

Application rate: 0.25–1 per m² (preventative), up to 25 per m² (curative)

Delivery: Order by 5pm Wednesday for delivery the following week

Specialist Mite Control Where Others Fall Short

When spider mites bunker deep into webbing or leafy crop zones, FELTIcontrol brings the precision you need. It contains Feltiella acarisuga, a spider mite predator whose larvae specialise in tracking and feeding on mites in their densest colonies.

Rather than sweeping the canopy, Feltiella larvae dig into hotspots – working through webbing, targeting eggs, and steadily clearing the issue from the inside. This makes them ideal for glasshouses, tunnels, and indoor propagation units where mite pressure builds out of sight.

Used early or alongside generalist predators like Amblyseius species, FELTIcontrol adds depth to your IPM approach – offering both immediate suppression and long-term balance without chemical sprays.

Best for:

• Webbed or hard-to-reach spider mite infestations
• Glasshouse ornamentals, strawberries, and dense leafy crops
• Growers aiming to avoid or reduce miticide use

How to apply:

Apply 0.25–1 per m² preventatively, or up to 25 per m² if mites are already present. Target known trouble spots and avoid recent pesticide use to aid establishment.

AMBLYCAcontrol (Amblyseius californicus) – Rugged Mite Control for Heat-Stressed Crops

Spider mites love a dry spell. Give them a bit of warmth, a dip in humidity, and they’ll take over – quickly, quietly, and thoroughly. If your crop’s feeling the pressure, AMBLYCAcontrol brings in some serious backup.

Inside you’ve got Amblyseius californicus – gritty, mobile predators that don’t sit around waiting for trouble. They wander the crop like scouts, ducking into folds and creases, feeling out where the pests are hiding and picking off mite eggs and young stages before anything kicks off.

They come into their own in the tricky spots – where irrigation’s tight, the leaves run warm, and chemical sprays just aren’t on the cards. And when the pest pressure dips, they don’t bail. They stick with the crop and keep things calm.

You’ll also get a hand against tarsonemid mites – those tiny, twisty pests that often show up late and do their damage in silence. Californicus keeps them in check, too.

Best for:

• Heat-stressed crops or low-irrigation zones where spider mites thrive
• Quiet tarsonemid or spider mite build-up in greenhouses, tunnels, or indoor grows
• Growers cutting down on miticides or managing delicate, flowering crops
• IPM systems needing even, consistent control without overreaction

How to apply:

Start with 25–50 mites per square metre to keep pest levels steady. If you’re reacting to an outbreak, go up to 200 per m². Early morning or late evening works best – keep it cool and avoid using after any recent sprays that might knock them off balance.

Delivery:

This is a live product. Place orders by 5pm Wednesday for delivery the following week.

AMBLYCAcontrol (Amblyseius californicus) – Rugged Mite Control for Heat-Stressed Crops

Spider mites love a dry spell. Give them a bit of warmth, a dip in humidity, and they’ll take over – quickly, quietly, and thoroughly. If your crop’s feeling the pressure, AMBLYCAcontrol brings in some serious backup.

Inside you’ve got Amblyseius californicus – gritty, mobile predators that don’t sit around waiting for trouble. They wander the crop like scouts, ducking into folds and creases, feeling out where the pests are hiding and picking off mite eggs and young stages before anything kicks off.

They come into their own in the tricky spots – where irrigation’s tight, the leaves run warm, and chemical sprays just aren’t on the cards. And when the pest pressure dips, they don’t bail. They stick with the crop and keep things calm.

You’ll also get a hand against tarsonemid mites – those tiny, twisty pests that often show up late and do their damage in silence. Californicus keeps them in check, too.

Best for:

• Heat-stressed crops or low-irrigation zones where spider mites thrive
• Quiet tarsonemid or spider mite build-up in greenhouses, tunnels, or indoor grows
• Growers cutting down on miticides or managing delicate, flowering crops
• IPM systems needing even, consistent control without overreaction

How to apply:

Start with 25–50 mites per square metre to keep pest levels steady. If you’re reacting to an outbreak, go up to 200 per m². Early morning or late evening works best – keep it cool and avoid using after any recent sprays that might knock them off balance.

Delivery:

This is a live product. Place orders by 5pm Wednesday for delivery the following week.

AMBLYCAcontrol (Amblyseius californicus) – Rugged Mite Control for Heat-Stressed Crops

Spider mites love a dry spell. Give them a bit of warmth, a dip in humidity, and they’ll take over – quickly, quietly, and thoroughly. If your crop’s feeling the pressure, AMBLYCAcontrol brings in some serious backup.

Inside you’ve got Amblyseius californicus – gritty, mobile predators that don’t sit around waiting for trouble. They wander the crop like scouts, ducking into folds and creases, feeling out where the pests are hiding and picking off mite eggs and young stages before anything kicks off.

They come into their own in the tricky spots – where irrigation’s tight, the leaves run warm, and chemical sprays just aren’t on the cards. And when the pest pressure dips, they don’t bail. They stick with the crop and keep things calm.

You’ll also get a hand against tarsonemid mites – those tiny, twisty pests that often show up late and do their damage in silence. Californicus keeps them in check, too.

Best for:

• Heat-stressed crops or low-irrigation zones where spider mites thrive
• Quiet tarsonemid or spider mite build-up in greenhouses, tunnels, or indoor grows
• Growers cutting down on miticides or managing delicate, flowering crops
• IPM systems needing even, consistent control without overreaction

How to apply:

Start with 25–50 mites per square metre to keep pest levels steady. If you’re reacting to an outbreak, go up to 200 per m². Early morning or late evening works best – keep it cool and avoid using after any recent sprays that might knock them off balance.

Delivery:

This is a live product. Place orders by 5pm Wednesday for delivery the following week.

ANDERcontrol (Amblyseius andersoni) – Versatile Mite for Multi-Pest Pressure

Not all pests stick to one spot – or even one species. In many glasshouses and tunnels, spider mites, thrips, whitefly, and tarsonemids turn up together, hitting hard and fast across different stages of growth.

ANDERcontrol brings in Amblyseius andersoni – a steady, generalist predator that plays a crucial role in early control. It doesn’t crash in like a blitz. Andersoni gets in early, blends into the crop, and just gets on with it – even when there’s barely a pest in sight. You’ll often forget it’s there – until you realise things haven’t flared up like they usually do.

You might catch a glimpse of them ducking between the leaves, quietly working through spider mite eggs, thrips nymphs, whitefly larvae, and whatever other soft-bodied hangers-on they come across.

They’re a great fit for propagation setups, young ornamentals, and growing areas where you’ve got several pests bubbling under the surface – but nothing explosive yet.

Because andersoni does well in mild, shifting conditions, it works especially well in crops that dislike high heat or sudden stress. It also partners neatly with other biocontrols for growers running a layered, responsive IPM strategy.

Best for:

• Telltale signs of spider mite, thrips, or whitefly creeping in under cover
• Preventative control in propagation zones or ornamental crops
• Mixed pest pressure in cooler or fluctuating temperatures
• IPM setups needing a steady, multi-pest predator without peak-and-crash cycles

How to apply:

Apply at 25–100 mites per square metre as a preventative measure. For higher pressure, increase to 250 mites per m². Distribute directly into the crop canopy during low light, and avoid recent use of broad-spectrum pesticides.

Delivery:

This is a live, temperature-sensitive product. Orders must be placed by 5pm Wednesday to guarantee delivery on the following week.

ANDERcontrol (Amblyseius andersoni) – Versatile Mite for Multi-Pest Pressure

Not all pests stick to one spot – or even one species. In many glasshouses and tunnels, spider mites, thrips, whitefly, and tarsonemids turn up together, hitting hard and fast across different stages of growth.

ANDERcontrol brings in Amblyseius andersoni – a steady, generalist predator that plays a crucial role in early control. It doesn’t crash in like a blitz. Andersoni gets in early, blends into the crop, and just gets on with it – even when there’s barely a pest in sight. You’ll often forget it’s there – until you realise things haven’t flared up like they usually do.

You might catch a glimpse of them ducking between the leaves, quietly working through spider mite eggs, thrips nymphs, whitefly larvae, and whatever other soft-bodied hangers-on they come across.

They’re a great fit for propagation setups, young ornamentals, and growing areas where you’ve got several pests bubbling under the surface – but nothing explosive yet.

Because andersoni does well in mild, shifting conditions, it works especially well in crops that dislike high heat or sudden stress. It also partners neatly with other biocontrols for growers running a layered, responsive IPM strategy.

Best for:

• Telltale signs of spider mite, thrips, or whitefly creeping in under cover
• Preventative control in propagation zones or ornamental crops
• Mixed pest pressure in cooler or fluctuating temperatures
• IPM setups needing a steady, multi-pest predator without peak-and-crash cycles

How to apply:

Apply at 25–100 mites per square metre as a preventative measure. For higher pressure, increase to 250 mites per m². Distribute directly into the crop canopy during low light, and avoid recent use of broad-spectrum pesticides.

Delivery:

This is a live, temperature-sensitive product. Orders must be placed by 5pm Wednesday to guarantee delivery on the following week.

ANDERcontrol (Amblyseius andersoni) – Versatile Mite for Multi-Pest Pressure

Not all pests stick to one spot – or even one species. In many glasshouses and tunnels, spider mites, thrips, whitefly, and tarsonemids turn up together, hitting hard and fast across different stages of growth.

ANDERcontrol brings in Amblyseius andersoni – a steady, generalist predator that plays a crucial role in early control. It doesn’t crash in like a blitz. Andersoni gets in early, blends into the crop, and just gets on with it – even when there’s barely a pest in sight. You’ll often forget it’s there – until you realise things haven’t flared up like they usually do.

You might catch a glimpse of them ducking between the leaves, quietly working through spider mite eggs, thrips nymphs, whitefly larvae, and whatever other soft-bodied hangers-on they come across.

They’re a great fit for propagation setups, young ornamentals, and growing areas where you’ve got several pests bubbling under the surface – but nothing explosive yet.

Because andersoni does well in mild, shifting conditions, it works especially well in crops that dislike high heat or sudden stress. It also partners neatly with other biocontrols for growers running a layered, responsive IPM strategy.

Best for:

• Telltale signs of spider mite, thrips, or whitefly creeping in under cover
• Preventative control in propagation zones or ornamental crops
• Mixed pest pressure in cooler or fluctuating temperatures
• IPM setups needing a steady, multi-pest predator without peak-and-crash cycles

How to apply:

Apply at 25–100 mites per square metre as a preventative measure. For higher pressure, increase to 250 mites per m². Distribute directly into the crop canopy during low light, and avoid recent use of broad-spectrum pesticides.

Delivery:

This is a live, temperature-sensitive product. Orders must be placed by 5pm Wednesday to guarantee delivery on the following week.

PHYTOcontrol (Phytoseiulus persimilis) – The Red Mite That Fights Back

Noticed a few pale flecks on the leaves? Or maybe some fine, silky threads where they shouldn’t be? That’s often your first sign spider mites have found their way in. Left to it, they’ll multiply fast and start draining the life out of your crop before you’ve had time to blink.

What you’ll find in PHYTOcontrol is Phytoseiulus persimilis – a fiery little predator that doesn’t mess about. These red mites aren’t just quick on their feet – they’re specialists. They hunt down two-spotted spider mites wherever they hide, biting through eggs, nymphs, and adults alike.

Get them in early and they’ll get cracking straight away. You won’t need to do much – they spread through the crop on their own, and when spider mite numbers are high, they multiply just as fast.

They really come into their own in enclosed, slightly steamy setups like glasshouses or grow tunnels – places where spraying could cause more problems than it solves.

A solid choice for:

• Spider mite blow-ups in polytunnels, propagation rooms, or indoor setups
• Fragile crops where spraying isn’t a good idea – soft fruit, ornamentals, and the like
• Growers who’ve had enough of re-entry times, residues, or chasing withdrawal periods
• IPM systems that need fast, pest-specific reinforcements without chemical disruption

How to apply:

Start with 5 to 10 mites per square metre if you’re staying ahead of the game – or go heavier, up to 100 per m², when the mites have already made themselves at home. Early morning or just before dusk tends to be best. Hold off on the sprays around release time – they won’t appreciate a chemical welcome.

Delivery:

This is a live, delicate product. Order by 5pm Wednesday to guarantee arrival on the following week.

PHYTOcontrol (Phytoseiulus persimilis) – The Red Mite That Fights Back

Noticed a few pale flecks on the leaves? Or maybe some fine, silky threads where they shouldn’t be? That’s often your first sign spider mites have found their way in. Left to it, they’ll multiply fast and start draining the life out of your crop before you’ve had time to blink.

What you’ll find in PHYTOcontrol is Phytoseiulus persimilis – a fiery little predator that doesn’t mess about. These red mites aren’t just quick on their feet – they’re specialists. They hunt down two-spotted spider mites wherever they hide, biting through eggs, nymphs, and adults alike.

Get them in early and they’ll get cracking straight away. You won’t need to do much – they spread through the crop on their own, and when spider mite numbers are high, they multiply just as fast.

They really come into their own in enclosed, slightly steamy setups like glasshouses or grow tunnels – places where spraying could cause more problems than it solves.

A solid choice for:

• Spider mite blow-ups in polytunnels, propagation rooms, or indoor setups
• Fragile crops where spraying isn’t a good idea – soft fruit, ornamentals, and the like
• Growers who’ve had enough of re-entry times, residues, or chasing withdrawal periods
• IPM systems that need fast, pest-specific reinforcements without chemical disruption

How to apply:

Start with 5 to 10 mites per square metre if you’re staying ahead of the game – or go heavier, up to 100 per m², when the mites have already made themselves at home. Early morning or just before dusk tends to be best. Hold off on the sprays around release time – they won’t appreciate a chemical welcome.

Delivery:

This is a live, delicate product. Order by 5pm Wednesday to guarantee arrival on the following week.

PHYTOcontrol (Phytoseiulus persimilis) – The Red Mite That Fights Back

Noticed a few pale flecks on the leaves? Or maybe some fine, silky threads where they shouldn’t be? That’s often your first sign spider mites have found their way in. Left to it, they’ll multiply fast and start draining the life out of your crop before you’ve had time to blink.

What you’ll find in PHYTOcontrol is Phytoseiulus persimilis – a fiery little predator that doesn’t mess about. These red mites aren’t just quick on their feet – they’re specialists. They hunt down two-spotted spider mites wherever they hide, biting through eggs, nymphs, and adults alike.

Get them in early and they’ll get cracking straight away. You won’t need to do much – they spread through the crop on their own, and when spider mite numbers are high, they multiply just as fast.

They really come into their own in enclosed, slightly steamy setups like glasshouses or grow tunnels – places where spraying could cause more problems than it solves.

A solid choice for:

• Spider mite blow-ups in polytunnels, propagation rooms, or indoor setups
• Fragile crops where spraying isn’t a good idea – soft fruit, ornamentals, and the like
• Growers who’ve had enough of re-entry times, residues, or chasing withdrawal periods
• IPM systems that need fast, pest-specific reinforcements without chemical disruption

How to apply:

Start with 5 to 10 mites per square metre if you’re staying ahead of the game – or go heavier, up to 100 per m², when the mites have already made themselves at home. Early morning or just before dusk tends to be best. Hold off on the sprays around release time – they won’t appreciate a chemical welcome.

Delivery:

This is a live, delicate product. Order by 5pm Wednesday to guarantee arrival on the following week.

PHYTOcontrol (Phytoseiulus persimilis) – The Red Mite That Fights Back

Noticed a few pale flecks on the leaves? Or maybe some fine, silky threads where they shouldn’t be? That’s often your first sign spider mites have found their way in. Left to it, they’ll multiply fast and start draining the life out of your crop before you’ve had time to blink.

What you’ll find in PHYTOcontrol is Phytoseiulus persimilis – a fiery little predator that doesn’t mess about. These red mites aren’t just quick on their feet – they’re specialists. They hunt down two-spotted spider mites wherever they hide, biting through eggs, nymphs, and adults alike.

Get them in early and they’ll get cracking straight away. You won’t need to do much – they spread through the crop on their own, and when spider mite numbers are high, they multiply just as fast.

They really come into their own in enclosed, slightly steamy setups like glasshouses or grow tunnels – places where spraying could cause more problems than it solves.

A solid choice for:

• Spider mite blow-ups in polytunnels, propagation rooms, or indoor setups
• Fragile crops where spraying isn’t a good idea – soft fruit, ornamentals, and the like
• Growers who’ve had enough of re-entry times, residues, or chasing withdrawal periods
• IPM systems that need fast, pest-specific reinforcements without chemical disruption

How to apply:

Start with 5 to 10 mites per square metre if you’re staying ahead of the game – or go heavier, up to 100 per m², when the mites have already made themselves at home. Early morning or just before dusk tends to be best. Hold off on the sprays around release time – they won’t appreciate a chemical welcome.

Delivery:

This is a live, delicate product. Order by 5pm Wednesday to guarantee arrival on the following week.

NEMASYS L (Steinernema kraussei) - High-volume nematode solution for vine weevil in cool conditions

Delivering 250 million cold-active nematodes, NEMASYS L in bulk format is ideal for full-scale applications across beds, tunnels, and field crops. The Steinernema kraussei species remains active in soil temperatures as low as 5°C, enabling proactive vine weevil control before visual signs of damage occur. Compatible with irrigation systems, this formulation supports year-round root protection as part of a preventative biocontrol regime.

• Main uses (guide) Vine weevil. 500mil per m2.

Delivery: All orders must be placed before Wednesday at 5pm, to guarantee delivery for the following week.

NEMASYS L (Steinernema kraussei) - Cold-active nematodes for early-season vine weevil suppression

NEMASYS L uses Steinernema kraussei, a nematode species effective at low temperatures, making it ideal for early spring or late autumn use. The 50 million tray treats smaller areas or is suitable for strategic hotspot treatments. Perfect for nurseries and landscapers who need vine weevil protection before pest emergence peaks. Works well in shaded, cool environments where other nematode species are less active.

• Main uses (guide) Vine weevil. 500mil per m2.

Delivery: All orders must be placed before Wednesday at 5pm, to guarantee delivery for the following week.

NEMAcontrol H (Hererorhabditis) - Large-area vine weevil control for professional use

This 250 million nematode tray offers scalable protection against vine weevil larvae across beds, borders, and large container setups. NEMAcontrol H provides natural, soil-based pest control for commercial growers aiming to avoid synthetic insecticides. Apply with standard drench or irrigation systems. Suitable for protected and outdoor applications, it’s an excellent fit for IPM strategies targeting high-value crops where root health is critical.

• Main uses (guide) Vine weevil. 500mil per m2. If applied monthly the rate can be halved.

Delivery: All orders must be placed before Wednesday at 5pm, to guarantee delivery for the following week.

NEMAcontrol H. (Hererorhabditis) - Biological vine weevil control using Heterorhabditis bacteriophora

NEMAcontrol H. offers targeted control of vine weevil larvae using beneficial nematodes. This 50 million tray is suited to small-scale applications or precision treatment zones. The active species, Heterorhabditis bacteriophora, penetrates soil and roots to locate and infect larvae, breaking the vine weevil lifecycle without chemicals. Ideal for ornamental nurseries, soft fruit production, or containerised crops where soil-dwelling pests cause root damage and crop loss.

• Main uses (guide) Vine weevil. 500mil per m2. If applied monthly the rate can be halved.

Delivery: All orders must be placed before Wednesday at 5pm, to guarantee delivery for the following week.

DIGLYcontrol (Diglyphus isaea) – Fast-Acting Leaf Miner Control for Protected Crops

Leaf miners can wreak havoc on young plants – cutting through leaf tissue, reducing growth, and leaving unsightly trails that knock saleability and performance. DIGLYcontrol offers a precise, natural way to shut them down early, without relying on chemical sprays.

Inside each bottle is Diglyphus isaea, a tiny parasitic wasp that moves fast. Unlike other species that lay inside the larvae, Diglyphus paralyses the leaf miner and lays its egg beside it. The developing wasp larva then feeds externally – finishing the pest off in the process. It’s a quick, effective route to control, and one that slots easily into any biological programme.

Once released, these wasps immediately search for activity in the leaf. They work best when leaf miners are already present in low numbers – making them ideal for curative use or where outbreaks are spotted early.

Some growers alternate or combine Diglyphus with Dacnusa sibirica for more layered control – especially where multiple miner species are present.

Best for use in:

• Ornamentals and greenhouse crops suffering from active leaf miner infestations
• Systems where visible leaf damage affects salability or market access
• Growers needing fast, chemical-free relief from minor outbreaks
• Use alongside yellow sticky traps to monitor presence and reduce adults

How to apply:

Use at a guide rate of 0.5 wasps per square metre. Apply during active leaf miner presence, ideally in warm, still conditions. Avoid applying broad-spectrum pesticides before or after release.

Delivery note:

This is a live, temperature-sensitive product. To ensure best viability, place orders before 5pm Wednesday for delivery the following week.

DACNUcontrol (Dacnusa sibirica) – Natural Leaf Miner Control for Protected Crops

Leaf miners can catch you off guard – leaving pale trails in the foliage, weakening young plants, and causing cosmetic damage that’s hard to reverse. DACNUcontrol gives growers a clean, reliable way to fight back, without reaching for the spray lance.

What’s inside the bottle? A tiny but tough little wasp called Dacnusa sibirica. It’s nature’s answer to leaf miner infestations. Instead of chasing pests with chemicals, Dacnusa quietly patrols the crop, finding leaf miner larvae and laying its eggs right inside them. The larvae don’t make it much further after that.

As soon as they’re released, these wasps get straight to work – settling into the crop and blending into the canopy like they’ve always belonged there. They’re especially handy in greenhouses, propagation tunnels, or anywhere sprays don’t quite cut it. The trick is timing: you’ll get the best results by introducing them early, before the miners get deep into the leaf or start to pupate.

They work well on their own, but many growers team them with Diglyphus isaea or sticky traps for broader, more sustained control.

Best used for:

• Ornamental or edible crops where leaf miner damage needs fast response
• Protected systems where foliage appearance or vigour is critical
• Growers aiming to reduce insecticide use in tight or sensitive crops
• Sites using preventative or early-stage IPM programmes

How to apply:

Use at roughly 0.25 - 0.5 wasps per square metre. Apply preventatively or at the very first sign of leaf miner activity. Avoid spraying broad-spectrum insecticides before or just after release, and use sticky traps to monitor how well they’re establishing.

Order note:

These are live insects, packed fresh and shipped to order. For guaranteed following week delivery, place your order by 5pm Wednesday.