What is this fitting used for?
Changing pipe direction by 90 degrees.
-
-
Commercial Products
Commercial Products
Professional Growing Media
Plant Nutrition
Plant Health
Sprayers & Protective Clothing
Pots, Planters & Trays
Propagation
Baskets & Planters
Fabrics & Netting
Environment
Plant Lighting
Irrigation
Plant Support & Tree Care
Equipment
Tools
Plant Labels
Packaging
Lawn Care
Clearance
-
Retail Products
Retail Products
Growing Media
Plant Nutrition
Plant Health
Pots, Planters & Tanks
Propagation
Baskets & Planters
Fabrics & Netting
Environment
Plant Lighting
Plant Support
Equipment
Tools
PVC 32mm x 32mm 90° Elbow
Please sign in to see pricing
193
£1.93
Unit price perEstimated delivery between November 01 and November 03.
The PVC 32mm x 32mm 90° Elbow is designed for changing pipe direction by 90 degrees in professional PVC irrigation and water-distribution systems.
Correct fitting selection helps create serviceable pipe layouts without forcing incompatible diameters, threads or connection types.
Key benefits
- Product type: PVC 90° Elbow
- Designed for changing pipe direction by 90 degrees
- For compatible professional PVC irrigation systems
- Dimensions retained from source product specification
Changing pipe direction
Use the elbow to create the stated change of direction without forcing straight pipe into an excessively tight bend. Align both pipe runs before permanent assembly so the fitting is not left under continuous side load.
Preparing PVC pipe & fittings
Cut pipe squarely, remove burrs and clean the joint area before assembly. Dry-fit the layout first where practical to confirm alignment and component selection.
For solvent-weld joints, use cleaner and adhesive compatible with the PVC system and follow the manufacturer's application and curing instructions. For threaded joints, use an appropriate sealing method and avoid excessive tightening.
Installation & commissioning
Support pipework so fittings do not carry avoidable bending loads. After the applicable curing or assembly process, commission the system gradually and inspect joints for leakage before routine crop use.
Pressure & compatibility
Nominal dimensions identify connection sizes but do not by themselves establish pressure rating or compatibility with every PVC system. Confirm the requirements of the complete installation before use.
Maintenance
Inspect accessible pipework and fittings periodically for leakage, movement, cracking or mechanical damage. Isolate and repair faults properly rather than relying on temporary external sealing.
PVC 32mm x 32mm 90° Elbow product details
| Product type | PVC 90° Elbow |
|---|---|
| Primary use | changing pipe direction by 90 degrees |
| Source dimensions / designation | 32mm x 32mm 90° Elbow |
| Application | Professional PVC irrigation and water-distribution systems |
PVC 32mm x 32mm 90° Elbow FAQs
How do I check the correct size?
Match every stated pipe diameter, thread and connection type to the components in the intended system.
Should PVC pipe be cut squarely?
Yes. Square, deburred cuts help fittings seat correctly and support reliable joint preparation.
Can I force a fitting onto a slightly different pipe size?
No. Use components specifically compatible with the stated dimensions and connection system.
Should pipework be supported?
Yes. Support runs so fittings are not carrying unnecessary pipe or water weight.
Can threaded PVC fittings be overtightened?
Yes. Excessive tightening can damage plastic threads or fitting bodies.
When can a solvent-weld system be pressurised?
Follow the adhesive manufacturer's current curing and commissioning instructions rather than assuming a universal time.
What should I do if a PVC joint leaks?
Safely isolate the system and inspect the joint, fitting and assembly method; repair it correctly rather than relying on a temporary external seal.
PVC 32mm x 32mm 90° Elbow
Please sign in to see pricing
193
£1.93
Unit price perBack in Stock
Sign up to be the first to know when it's back in stock.
The PVC 32mm x 32mm 90° Elbow is designed for changing pipe direction by 90 degrees in professional PVC irrigation and water-distribution systems.
Correct fitting selection helps create serviceable pipe layouts without forcing incompatible diameters, threads or connection types.
Key benefits
- Product type: PVC 90° Elbow
- Designed for changing pipe direction by 90 degrees
- For compatible professional PVC irrigation systems
- Dimensions retained from source product specification
Changing pipe direction
Use the elbow to create the stated change of direction without forcing straight pipe into an excessively tight bend. Align both pipe runs before permanent assembly so the fitting is not left under continuous side load.
Preparing PVC pipe & fittings
Cut pipe squarely, remove burrs and clean the joint area before assembly. Dry-fit the layout first where practical to confirm alignment and component selection.
For solvent-weld joints, use cleaner and adhesive compatible with the PVC system and follow the manufacturer's application and curing instructions. For threaded joints, use an appropriate sealing method and avoid excessive tightening.
Installation & commissioning
Support pipework so fittings do not carry avoidable bending loads. After the applicable curing or assembly process, commission the system gradually and inspect joints for leakage before routine crop use.
Pressure & compatibility
Nominal dimensions identify connection sizes but do not by themselves establish pressure rating or compatibility with every PVC system. Confirm the requirements of the complete installation before use.
Maintenance
Inspect accessible pipework and fittings periodically for leakage, movement, cracking or mechanical damage. Isolate and repair faults properly rather than relying on temporary external sealing.
PVC 32mm x 32mm 90° Elbow product details
| Product type | PVC 90° Elbow |
|---|---|
| Primary use | changing pipe direction by 90 degrees |
| Source dimensions / designation | 32mm x 32mm 90° Elbow |
| Application | Professional PVC irrigation and water-distribution systems |
PVC 32mm x 32mm 90° Elbow FAQs
What is this fitting used for?
Changing pipe direction by 90 degrees.
How do I check the correct size?
Match every stated pipe diameter, thread and connection type to the components in the intended system.
Should PVC pipe be cut squarely?
Yes. Square, deburred cuts help fittings seat correctly and support reliable joint preparation.
Can I force a fitting onto a slightly different pipe size?
No. Use components specifically compatible with the stated dimensions and connection system.
Should pipework be supported?
Yes. Support runs so fittings are not carrying unnecessary pipe or water weight.
Can threaded PVC fittings be overtightened?
Yes. Excessive tightening can damage plastic threads or fitting bodies.
When can a solvent-weld system be pressurised?
Follow the adhesive manufacturer's current curing and commissioning instructions rather than assuming a universal time.
What should I do if a PVC joint leaks?
Safely isolate the system and inspect the joint, fitting and assembly method; repair it correctly rather than relying on a temporary external seal.
Pay with
Your transaction is protected with advanced security measures to keep your information confidential
