What is acoustic ducting?
Acoustic ducting is insulated flexible ventilation duct designed to help absorb and reduce sound transmitted through an extraction or intake system.
70 products
70 products
Sort by:
£5.99
Unit price per£5.99
Unit price per127mm (5") x 5m Acoustic Ducting is an insulated flexible ventilation duct designed to help reduce fan and airflow noise transmitted through extraction and intake systems.
Ventilation fans generate sound from both the fan itself and the movement of air through the system. Standard uninsulated ducting can allow this noise to travel along the ventilation route, while acoustic ducting incorporates an insulating layer around the inner duct to help absorb transmitted sound.
This makes it particularly useful for indoor horticulture, propagation areas and controlled growing environments where ventilation equipment may operate for extended periods and reducing unnecessary noise is desirable.
Supplied in a 5 metre length with a nominal 127mm / 5" diameter, it can be connected to compatible fans, carbon filters and ventilation fittings. The flexible construction allows the duct to be routed around equipment and cut to the required length during installation.
Why choose 127mm acoustic ducting?
How does acoustic ducting reduce noise?
Noise within a ventilation system can come from the fan motor, vibration and turbulent air moving through the ductwork. Some of this sound can travel along ordinary flexible duct and become noticeable elsewhere in the installation.
Acoustic ducting surrounds the flexible inner airflow passage with insulation designed to absorb transmitted sound. This helps reduce the amount of fan and airflow noise travelling through the duct route.
It can be particularly useful around extraction fans, between compatible fans and carbon filters, and along sections of ventilation duct where transmitted noise needs to be controlled.
Acoustic ducting is intended to reduce transmitted noise rather than make a ventilation system completely silent. Fan design, fan speed, airflow velocity, vibration and installation quality all contribute to the final noise level.
Acoustic ducting for indoor horticulture
Reliable ventilation helps manage temperature, humidity and air exchange within controlled growing environments. Extraction and intake equipment can, however, become a significant source of noise when operating continuously or at higher fan speeds.
Acoustic ducting provides a practical way to reduce sound transmission while maintaining the flexibility needed to connect ventilation equipment and route air around an installation.
The 127mm / 5" size is suitable for compatible ventilation systems using appropriately sized inline fans, carbon filters, connectors and other round duct fittings.
Getting the best airflow from acoustic ducting
Good installation is important for maintaining ventilation performance. Flexible ducting should be extended sufficiently rather than left heavily compressed, helping create a smoother internal path for moving air.
Keep the duct route as short and direct as practical. Tight bends, crushed sections and unnecessary changes in direction create additional resistance and can reduce the effective airflow delivered by the fan.
Where the duct needs to change direction, use gradual bends wherever possible. The supplied 5m length can be cut so that only the amount actually required is installed.
Installing 127mm acoustic ducting
Before installation, check that the fan, carbon filter and other ventilation components have compatible nominal 127mm / 5" connections.
Fit the flexible inner duct securely over the ventilation connection and fasten it using a suitably sized duct clamp or appropriate fixing. HVAC foil tape can also be used where additional sealing is required.
Arrange the surrounding insulation and outer covering neatly around the completed connection so that the acoustic layer remains as continuous as practical.
Support longer sections appropriately rather than allowing the entire weight of the ducting to hang directly from a fan, filter or connecting fitting.
Compatible ventilation equipment
Check the actual connection diameter of individual ventilation components before installation, as dimensions can vary slightly between manufacturers.
127mm (5") x 5m Acoustic Ducting product details
| Product type | Insulated acoustic flexible ducting |
|---|---|
| Nominal diameter | 127mm / 5" |
| Length | 5m |
| Duct type | Flexible |
| Construction | Acoustically insulated flexible ventilation duct |
| Primary purpose | Air movement with reduced transmission of ventilation noise |
| Suitable airflow | Extraction & intake |
| Compatible system size | Nominal 127mm / 5" round ventilation systems |
| Suitable applications | Indoor horticulture, propagation areas, controlled growing environments & compatible ventilation installations |
127mm (5") Acoustic Ducting FAQs
What is acoustic ducting?
Acoustic ducting is insulated flexible ventilation duct designed to help absorb and reduce sound transmitted through an extraction or intake system. What size is this acoustic duct?
This version has a nominal diameter of 127mm, equivalent to 5 inches, and is supplied in a 5 metre length. Is this suitable for a 5-inch extraction fan?
Yes, provided the fan has a compatible nominal 127mm / 5" connection. Can it be used with a 5-inch carbon filter?
Yes. It can be used with compatible 127mm / 5" carbon filters and extraction fans as part of an appropriately sized ventilation system. Does acoustic ducting reduce fan noise?
It helps reduce fan and airflow sound transmitted along the ductwork. It does not completely eliminate noise generated directly by the fan. Is acoustic ducting quieter than ordinary flexible ducting?
Its insulating layer is specifically intended to absorb transmitted sound, making it useful where reducing ventilation noise is important. Can acoustic ducting be used for horticultural extraction?
Yes. It is well suited to indoor horticultural ventilation systems where temperature, humidity and air exchange need to be managed while keeping transmitted ventilation noise under control. Can it be used for air intake?
Yes. Acoustic ducting can be incorporated into compatible intake as well as extraction systems. Can I cut the 5m duct into shorter sections?
Yes. It can be cut to suit the required ventilation route or divided into several individual sections. Should flexible acoustic ducting be fully extended?
It should be extended sufficiently for the installation rather than left unnecessarily compressed. This helps create a smoother internal path for airflow. Do bends in acoustic ducting affect airflow?
Yes. Tight bends increase resistance and turbulence, so smooth and gradual changes in direction are preferable wherever possible. Does duct length affect extraction performance?
Every length of duct introduces some resistance. Longer runs, multiple bends and additional fittings can therefore reduce the effective airflow of a ventilation system. Where should acoustic ducting be installed?
It can be used throughout a compatible ventilation route. Sections around the extraction fan can be particularly useful where transmitted fan noise is a concern. How should acoustic ducting be secured?
Use appropriately sized duct clamps or suitable ventilation fixings, with HVAC foil tape where additional sealing is required. How can horticultural ventilation noise be reduced further?
Correct fan sizing, sensible duct routing, vibration isolation, suitable fan-speed control and ventilation silencers can be combined with acoustic ducting to create a quieter overall system.
£6.85
Unit price per£6.85
Unit price perThe Loadstar Pro 600W Dual Spectrum HPS Lamp is a cost-effective high-intensity discharge lamp designed to provide useful light for both vegetative growth and flowering from a single 600W bulb.
Unlike a conventional flowering-focused HPS lamp, the Loadstar Pro uses a dual-spectrum output that supplements the characteristic red and orange HPS spectrum with additional blue light. This gives plants a broader spectrum and allows the same lamp to be used throughout the main growth and flowering stages.
The Loadstar Pro is designed for use with compatible 600W HID lighting equipment and is suitable as a replacement lamp for existing 600W HPS systems or as part of a new 600W lighting installation.
It provides a straightforward option for growers who want the proven intensity of 600W HID lighting without changing between separate vegetative and flowering lamps.
Why choose the Loadstar Pro 600W Dual Spectrum Lamp?
Dual spectrum for growth & flowering
Standard high-pressure sodium lamps are particularly strong in the warmer red and orange areas of the spectrum. This makes HPS technology particularly useful during flowering and fruiting, but a conventional HPS spectrum is less balanced towards blue wavelengths.
A dual-spectrum HPS lamp introduces additional blue light while retaining the strong warm-spectrum characteristics of HPS. The result is a more versatile lamp that can support vegetative development as well as flowering and fruiting.
For growers who prefer to run one type of HID lamp throughout the crop cycle, this avoids the need to swap between a separate metal halide growth lamp and HPS flowering lamp.
Suitable applications
Using the Loadstar Pro 600W lamp
The Loadstar Pro must be operated with a suitable 600W HID ballast and compatible reflector or lamp holder. The ballast regulates the electrical supply required to start and operate the HID lamp correctly.
Always switch off and isolate the lighting system before fitting, removing or inspecting the lamp. Allow the lamp and reflector to cool fully before handling, as HID lamps and surrounding lighting equipment can become extremely hot during operation.
Ensure the lamp is securely fitted and use only equipment rated for the lamp type and wattage. HID lamps should not be connected directly to the mains without the appropriate ballast.
Replacing older HPS lamps
HID lamps gradually lose useful light output as they age, even when the lamp continues to illuminate normally. This means an older lamp can appear to be working while providing less effective light than when it was new.
Replacing ageing lamps is therefore an important part of maintaining an established HID lighting installation. The Loadstar Pro provides a cost-effective replacement for compatible 600W systems while retaining dual-spectrum operation across both vegetative and flowering stages.
Loadstar Pro 600W product details
| Brand | Loadstar |
|---|---|
| Range | Loadstar Pro |
| Product type | Dual-spectrum HPS lamp |
| Lamp technology | High Pressure Sodium (HPS) |
| Power | 600W |
| Spectrum | Dual spectrum |
| Suitable crop stages | Vegetative growth, flowering & fruiting |
| Ballast required | Yes - compatible 600W HID ballast required |
| Typical use | Plant lighting, controlled-environment horticulture & replacement lamp for compatible 600W HPS systems |
| Outer case quantity | 25 lamps |
Loadstar Pro 600W Dual Spectrum Lamp FAQs
What type of lamp is the Loadstar Pro 600W?
It is a 600W dual-spectrum High Pressure Sodium (HPS) lamp designed for plant lighting applications. What does dual spectrum mean?
A dual-spectrum HPS lamp supplements the strong red and orange output associated with HPS technology with additional blue light, producing a more versatile spectrum for different stages of plant development. Can I use the Loadstar Pro 600W for vegetative growth?
Yes. The additional blue component of its dual-spectrum output makes the lamp suitable for vegetative growth as well as later crop stages. Can I use it for flowering and fruiting?
Yes. The Loadstar Pro retains the strong warm-spectrum output associated with HPS lighting and is suitable for flowering and fruiting crops. Can I use the same lamp throughout the crop cycle?
Yes. One of the main advantages of a dual-spectrum HPS lamp is its ability to provide useful light for both vegetative and flowering stages without changing between separate growth and bloom lamps. Does the Loadstar Pro 600W need a ballast?
Yes. This is an HID lamp and requires a compatible 600W ballast to start and regulate the lamp correctly. Can I connect this 600W HPS bulb directly to the mains?
No. A suitable HID ballast and compatible lighting equipment are required. Never connect an HID lamp directly to a mains electrical supply. Will it work with a 600W digital ballast?
It is designed for compatible 600W HPS lighting systems. Always confirm that the individual ballast is rated for the lamp type and 600W operating power before use. Can it replace an existing 600W HPS lamp?
Yes, provided the existing ballast, reflector and lamp holder are compatible with this type of 600W HPS lamp. Is this a metal halide lamp?
No. The Loadstar Pro is a dual-spectrum HPS lamp. Its spectrum contains an additional blue component for improved versatility, but it is not a metal halide lamp. Does an HPS lamp lose output as it gets older?
Yes. HID lamps gradually lose useful light output with operating time, so an older lamp can continue illuminating while producing less effective plant light than it did when new. Does a 600W HPS lamp produce heat?
Yes. HID lighting produces substantial heat during operation. Appropriate ventilation, clearance and temperature management should be considered when designing the lighting installation. Is the Loadstar Pro supplied as a complete lighting system?
No. This product is the 600W dual-spectrum lamp. A compatible ballast, reflector, lamp holder and associated electrical equipment are required to form a complete lighting system. How many Loadstar Pro 600W lamps are in an outer case?
The outer case quantity for this SKU is 25 lamps.
£7.50
Unit price per£7.50
Unit price perComplete Bluelab care kit for cleaning, maintaining and checking conductivity probes to help keep EC readings accurate and dependable.
The Bluelab Conductivity Probe Care Kit brings together the essential equipment needed to look after Bluelab EC and conductivity probes. Regular cleaning helps remove the nutrient salts, mineral deposits and other residue that can build up on a conductivity sensor during normal use.
Keeping the probe clean is important because contamination can cause EC or ppm readings to become inaccurate, fluctuate or respond differently than expected. The kit includes Bluelab Conductivity Probe Cleaner and a dedicated chamois for cleaning the probe face, along with 2.77 EC Conductivity Standard Solution for checking its performance afterwards.
It is a useful maintenance kit for growers relying on conductivity measurements to monitor nutrient strength, whether using a handheld Bluelab meter or a compatible conductivity probe connected to a monitoring or control system.
Why use the Bluelab Conductivity Probe Care Kit?
What is included in the Bluelab Conductivity Probe Care Kit?
The kit contains Bluelab Conductivity Probe Cleaner, a conductivity probe cleaning chamois, two single-use sachets of Bluelab 2.77 EC Conductivity Standard Solution, a plastic cup and probe care instructions.
Together, these provide what you need to clean the conductivity sensor and then check its performance using the supplied EC standard solution.
How to clean a Bluelab conductivity probe
Remove the conductivity probe shroud as directed for your Bluelab meter or probe. Apply one or two drops of Conductivity Probe Cleaner to the probe face and rub firmly using the supplied Bluelab chamois.
Rinse the probe face thoroughly under running tap water while continuing to clean it with the chamois. A properly cleaned probe face should allow water to form an even film rather than separate beads. If water continues to bead on the surface, repeat the cleaning process.
Refit the probe shroud and place the probe into fresh 2.77 EC Conductivity Standard Solution. Allow the reading to stabilise before checking the result. This provides a useful indication that the conductivity probe has been cleaned effectively.
Product details
| Brand | Bluelab |
|---|---|
| Product | Probe Care Kit – Conductivity |
| Product type | Conductivity / EC probe cleaning and maintenance kit |
| Measurement type | Conductivity (EC / ppm) |
| Conductivity standard | 2.77 EC |
| Standard solution quantity | 2 x single-use sachets |
| Probe cleaner | Bluelab Conductivity Probe Cleaner |
| Cleaning accessory | Bluelab chamois |
| Also included | 1 x plastic cup & probe care instructions |
| Purpose | Cleaning, maintenance & performance checking of compatible Bluelab conductivity probes |
Bluelab Conductivity Probe Care Kit FAQs
What is the Bluelab Conductivity Probe Care Kit used for?
It is designed for cleaning and maintaining compatible Bluelab conductivity probes and checking their performance using 2.77 EC Conductivity Standard Solution.
Why should I clean my Bluelab EC probe?
Nutrient salts, minerals and other deposits can accumulate on the conductivity sensor during use. Cleaning removes this build-up and helps the probe continue to provide dependable EC or ppm readings.
How often should I clean my Bluelab conductivity probe?
Bluelab recommends checking and cleaning conductivity probes around once a month for best results. Cleaning is also worthwhile if readings appear incorrect, fluctuate unexpectedly or are lower than expected.
What is the 2.77 EC solution used for?
The supplied 2.77 EC Conductivity Standard Solution provides a known reference value for checking the conductivity probe after cleaning.
Does the kit include conductivity probe cleaner?
Yes. Bluelab Conductivity Probe Cleaner is included along with a dedicated chamois for cleaning the probe face.
Can I use this kit with a Bluelab Truncheon?
Yes. Bluelab specifies this cleaning procedure and care kit for its Truncheon nutrient meters as well as a range of other Bluelab conductivity probes.
Does this kit maintain pH probes as well?
No. This is the conductivity-specific Probe Care Kit. Bluelab offers separate pH and combined pH and Conductivity care kits for growers who also need to maintain pH probes.
Do Bluelab conductivity probes need calibrating?
Bluelab conductivity equipment is factory calibrated, and calibration requirements vary by instrument. Routine cleaning followed by checking the probe in fresh 2.77 EC standard solution is the key maintenance procedure. Certain Bluelab instruments can be recalibrated if necessary.
£7.80
Unit price per£7.80
Unit price perA concentrated foliar treatment for preventative and curative use against common plant pests including spider mites, aphids, thrips and whitefly.
Ecolizer Bugs Away is a concentrated foliar pest-control treatment based on a combination of potassium salts and fatty acids. It is designed to help growers manage common sap-feeding pests while fitting into a regular crop-care programme.
Bugs Away can be used against red spider mites, aphids, thrips and whitefly, with Ecolizer product information also highlighting its effectiveness against both larval and adult stages of red spider mite.
The formulation is biodegradable and does not leave residue behind on the foliage. It can be used preventatively before pest populations become established or more frequently as a curative treatment when an infestation is present.
Why choose Ecolizer Bugs Away?
What pests can Ecolizer Bugs Away be used against?
Ecolizer Bugs Away is intended for foliar pest management and is particularly relevant where crops are affected by red spider mites, aphids, thrips or whitefly.
Thorough coverage matters when treating foliage. Pests such as spider mites commonly occupy protected areas on the underside of leaves, so Bugs Away should be applied across both upper and lower leaf surfaces rather than simply misted over the top of the crop.
Bugs Away can also be introduced preventatively before an infestation becomes established. This makes it suitable for growers who want to incorporate regular foliar monitoring and treatment into their wider pest-management programme.
How to use Ecolizer Bugs Away
Dilute Ecolizer Bugs Away at 10–20ml per litre of water. Apply as a foliar spray, thoroughly wetting both the upper and lower surfaces of the leaves.
For preventative treatment, apply once per week from the beginning of the crop cycle until flower formation begins.
For curative treatment, apply twice per week. Where pest pressure is particularly severe, the established Ecolizer instructions allow treatment up to three times per week.
Avoid application in direct sunlight. Ecolizer's product guidance also advises against using Bugs Away once bud formation begins.
Ecolizer Bugs Away 500ml product details
| Product | Ecolizer Bugs Away |
|---|---|
| Product type | Concentrated foliar pest-control treatment |
| Size | 500ml |
| Form | Concentrated liquid |
| Formulation | Based on potassium salts & fatty acids |
| Target pests | Red spider mites, aphids, thrips & whitefly |
| Application method | Foliar spray |
| Dilution rate | 10–20ml per litre of water |
| Preventative use | Once per week until flower formation begins |
| Curative use | Twice per week |
| Severe pest pressure | Up to three applications per week |
| Coverage | Thoroughly wet upper & lower leaf surfaces |
| Biodegradable | Yes |
| Leaf residue | No residue left behind after breakdown |
| Approximate working solution | 25–50L depending on dilution rate |
Ecolizer Bugs Away FAQs
What pests does Ecolizer Bugs Away target?
Ecolizer Bugs Away is intended for use against common foliar pests including red spider mites, aphids, thrips and whitefly.
Does Ecolizer Bugs Away work against spider mites?
Yes. Red spider mite is one of the principal pests associated with Bugs Away, with Ecolizer product information specifically identifying activity against both larval and adult stages.
How much Ecolizer Bugs Away should I use?
Dilute 10–20ml of Ecolizer Bugs Away per litre of water. A 500ml bottle therefore produces approximately 25–50 litres of diluted spray solution.
How do I apply Ecolizer Bugs Away?
Apply Bugs Away as a foliar spray and thoroughly wet both the upper and lower surfaces of the leaves. Good coverage is particularly important where pests are sheltering underneath foliage.
How often should I use Ecolizer Bugs Away?
For preventative treatment, apply once per week until flower formation begins. For an existing pest problem, apply twice per week, increasing to three times per week where pest pressure is severe.
Can Ecolizer Bugs Away be used preventatively?
Yes. Bugs Away can be used once per week as a preventative foliar treatment from the beginning of the crop cycle until flower formation begins.
Can Ecolizer Bugs Away be used during flowering?
Ecolizer's application guidance advises preventative treatment only until flower formation begins and warns against application once buds begin to form.
Should I spray the underside of the leaves?
Yes. Both the upper and lower surfaces of the foliage should be thoroughly treated. This is particularly important for pests such as spider mites that commonly occupy the underside of leaves.
Is Ecolizer Bugs Away biodegradable?
Yes. Ecolizer describes Bugs Away as biodegradable and states that it leaves no residue behind on the foliage.
How much spray will a 500ml bottle of Ecolizer Bugs Away make?
At the recommended dilution range of 10–20ml per litre, a 500ml bottle makes approximately 25–50 litres of ready-to-use spray solution.
£7.83
Unit price per£7.83
Unit price perLarge Medusa Baseline Booster Tray designed to collect and manage plant runoff while helping maintain effective drainage across uneven grow-room floors.
The Medusa Baseline Large Booster Run Off Tray provides a practical way to manage excess water and nutrient solution beneath larger growing containers. With a 38 x 43cm internal growing area, the Large tray can accommodate RootMASS fabric pots up to 78 litres.
The Booster version raises the tray to help compensate for uneven floors and improve the flow of runoff through the drainage system. This makes it particularly useful when building larger multi-pot run-to-waste installations where reliable drainage between growing positions matters.
Baseline trays can be connected together using flexible drainage pipe and compatible irrigation fittings, allowing runoff to be directed away by gravity or incorporated into a Medusa runoff removal system.
Why choose the Medusa Baseline Large Booster Tray?
What is the Medusa Baseline Large Booster Tray suitable for?
This Large Booster Tray is designed for hydroponic and horticultural growing setups where runoff needs to be collected beneath individual pots and directed away from the growing area.
Its larger 38 x 43cm internal area makes it particularly suitable for substantial growing containers, including RootMASS fabric pots up to 78L. The Booster configuration is useful where floor levels make gravity drainage more difficult, as the additional elevation helps create a more effective runoff route.
How to use the Medusa Baseline Large Booster Tray
Position one tray beneath each growing container and connect the required drainage fittings and flexible pipework. The tray includes a 25mm connection hole together with three 75mm openings that provide different options for routing pipework, including beneath the trays.
On a suitable level floor, runoff can be carried away using gravity. Where the installation is uneven or runoff needs to be actively removed, the Baseline system can be configured with a compatible runoff removal Brain to pump excess solution towards a drain or collection tank.
Product details
| Brand / range | Medusa Baseline |
|---|---|
| Product | Large Booster Run Off Tray |
| Product type | Hydroponic runoff / drainage tray |
| Internal growing area | 38 x 43cm |
| Tray depth | 30mm |
| Maximum RootMASS pot size | Up to 78L |
| Drainage connection hole | 25mm |
| Pipe routing holes | 3 x 75mm |
| Version | Booster |
| Typical applications | Run-to-waste irrigation, runoff collection & multi-pot growing systems |
Medusa Baseline Large Booster Tray FAQs
What is a Medusa Baseline Booster Tray?
It is a raised runoff tray designed to sit beneath a growing container, collect excess irrigation solution and help direct that runoff into connected drainage pipework.
What size is the Large Medusa Baseline Booster Tray?
The Large version provides a 38 x 43cm internal growing area and is designed for larger plant containers.
What size pot fits the Large Medusa Baseline Tray?
The Large tray can accommodate RootMASS fabric pots up to 78 litres.
What is the difference between a standard Baseline Tray and a Booster Tray?
The Booster version provides additional elevation, helping compensate for uneven floors and improving runoff flow where additional fall is required within the drainage layout.
Can several Medusa Baseline trays be connected together?
Yes. Baseline trays are designed as modular components and can be linked with suitable flexible pipework and irrigation fittings to manage runoff from multiple growing positions.
Can the Large Booster Tray be used for run-to-waste irrigation?
Yes. Runoff can be carried away from the trays towards an appropriate waste or collection point, making them well suited to run-to-waste growing systems.
Do I need a Medusa Baseline Brain?
Not necessarily. On a suitable level installation, runoff can be removed by gravity. A compatible Baseline Brain can be used where excess solution needs to be actively pumped away.
Does this product include a plant pot?
No. This product is the Medusa Baseline Large Booster Tray. Pots, drainage fittings, pipework and other system components are supplied separately.
£8.58
Unit price per£8.58
Unit price perAtami Kilomix 50L is a heavily fertilised peat and perlite growing substrate enriched with mineral and organic nutrition, providing demanding plants with a rich growing medium and sustained nutrient availability.
Atami Kilomix is one of the most nutrient-rich growing substrates in the Atami range. It combines peat and perlite with a substantial fertiliser charge designed to provide plants with important nutrients over an extended period.
The substrate is enriched with ingredients including Atami Worm Delight, lime, guano and other organic fertilisers, alongside mineral nutrition. This combination provides both readily available nutrition and a longer-lasting nutrient contribution as the crop develops.
Unlike a lightly fertilised substrate where the grower begins introducing a complete liquid feeding programme relatively early, Kilomix provides a much richer nutritional foundation from the outset. Atami describes the professionally balanced fertiliser composition as providing a constant supply of important nutrients over a longer period.
Perlite helps maintain an aerated physical structure and effective water management around the root zone, while the peat provides the main growing medium. The result is a nutrient-rich substrate particularly suited to established and demanding plants.
Why choose Atami Kilomix?
What plants is Atami Kilomix suitable for?
Kilomix is designed for growers looking for a strongly fertilised substrate rather than a lightly charged growing medium. It is particularly useful for established plants and crops with relatively high nutritional requirements.
Because Kilomix has a significantly higher fertilisation level than Atami Janeco-Light-Mix, growers should take the existing nutrient charge into account before adding further fertiliser.
For very young seedlings, freshly rooted cuttings or particularly nutrient-sensitive varieties, a lighter substrate may offer greater control over early nutrition. Atami Janeco-Light-Mix is specifically positioned as a lightly fertilised substrate suitable for young plants and cuttings, whereas Kilomix is the richer option for more demanding growth.
Kilomix can be used for container-grown crops, indoor or protected cultivation and other soil-style growing applications where a nutrient-rich peat-based substrate is appropriate.
How to use Atami Kilomix
Fill the required container with Kilomix, allowing the substrate to remain naturally loose rather than compressing it excessively. Transplant the established plant into the substrate and water thoroughly to settle the growing medium around the root system.
Because Kilomix is already heavily fertilised, additional base fertiliser should not automatically be applied immediately after transplanting. Monitor the plants and allow their condition and stage of development to determine when additional nutrition becomes necessary.
The existing nutrient charge should also be considered when measuring the strength of any subsequent feed programme. Introducing a strong liquid fertiliser immediately into an already highly fertilised substrate can result in excessive nutrient levels.
Irrigation frequency should be adjusted according to plant size, container volume, temperature, humidity and crop water demand. Allow appropriate moisture cycling while avoiding prolonged waterlogging or allowing the root zone to become excessively dry.
Why is Kilomix more heavily fertilised?
Atami positions Kilomix above Janeco-Light-Mix in terms of fertilisation level. Its formulation combines mineral fertilisers with organic nutrient sources, giving growers a rich substrate capable of supporting crop development over an extended period.
Mineral nutrition can provide nutrients that are readily available to plants, while organic components contribute to the longer-term nutrient supply within the growing medium. Atami describes this combination as providing a constant supply of important nutrients over a prolonged period.
Kilomix includes Worm Delight, lime, guano and other organic fertilisers. Together with the peat and perlite base, these ingredients create a substantially richer environment than a lightly fertilised propagation or starter substrate.
The result is a growing medium designed for growers who want more nutrition incorporated into the substrate itself, rather than relying entirely on liquid fertilisers from the beginning of cultivation.
Peat and perlite for balanced root-zone conditions
Nutrition is only one part of a successful growing medium. Kilomix combines its substantial fertiliser charge with peat and perlite to create an effective physical environment around the roots.
Peat provides moisture retention and the main structural body of the substrate, while perlite introduces additional pore space. This helps maintain aeration and drainage within the root zone while retaining sufficient moisture for plant uptake.
Maintaining the correct balance between water and oxygen is important for healthy root development, particularly in containers where excessive compaction or saturation can restrict root-zone aeration.
Atami Kilomix 50L product details
| Product | Atami Kilomix |
|---|---|
| Product type | Heavily fertilised growing substrate |
| Bag size | 50L |
| Base growing media | Peat & perlite |
| Fertilisation level | High / heavily fertilised |
| Nutrient sources | Combination of mineral & organic fertilisers |
| Enriched with | Atami Worm Delight, lime, guano & other organic fertilisers |
| EC | 2.60-2.80 |
| Structure | Aerated peat-based substrate containing perlite |
| Nutrient availability | Formulated for sustained nutrient availability over an extended period |
| Best suited to | Established plants & crops requiring a nutrient-rich growing medium |
| Additional feeding | Monitor crop requirements before introducing additional fertiliser due to the high initial nutrient charge |
| Outer case quantity | 1 x 50L bag |
| Pallet quantity | 70 x 50L bags |
Atami Kilomix 50L FAQs
What is Atami Kilomix?
Atami Kilomix is a heavily fertilised peat and perlite growing substrate enriched with mineral and organic nutrition. It is designed to provide a nutrient-rich growing medium for established and demanding plants.
Is Atami Kilomix heavily fertilised?
Yes. Atami specifically classifies Kilomix as a heavily fertilised substrate. It contains considerably more incorporated nutrition than the lightly fertilised Janeco-Light-Mix.
What is Atami Kilomix made from?
Kilomix is based on peat and perlite and is enriched with mineral and organic nutrition. Atami identifies Worm Delight, lime and guano among the important ingredients used within the substrate.
What is the EC of Atami Kilomix?
Atami specifies an EC of 2.60-2.80 for Kilomix, reflecting its relatively high level of incorporated fertilisation.
Does Atami Kilomix contain perlite?
Yes. Perlite is incorporated into the peat-based substrate to help maintain an airy structure and improve water management around the root zone.
Does Atami Kilomix contain worm humus?
Yes. Atami lists its Worm Delight worm humus-based soil enhancer as one of the ingredients contributing to the rich Kilomix formulation.
Does Atami Kilomix contain guano?
Yes. Guano forms part of the organic nutrient package incorporated into Kilomix alongside other fertilising ingredients.
Do I need to feed plants immediately in Atami Kilomix?
Kilomix already contains a substantial nutrient charge, so growers should not automatically begin with a strong base fertiliser. Monitor crop development and introduce additional nutrition when the plants require it.
Is Atami Kilomix suitable for seedlings and cuttings?
Kilomix is considerably more heavily fertilised than a typical propagation substrate. For very young seedlings, fresh cuttings or nutrient-sensitive plants, Atami Janeco-Light-Mix provides a lighter nutrient charge and greater control over early feeding.
What is the difference between Atami Kilomix and Janeco-Light-Mix?
The main difference is fertilisation level. Janeco-Light-Mix is lightly fertilised and particularly useful for young plants and growers who want greater control over feeding. Kilomix is heavily fertilised and provides substantially more incorporated nutrition for established and demanding plants.
What is the difference between Atami Kilomix and Bi Grow Mix?
Kilomix is a heavily fertilised peat and perlite substrate. Atami Bi Grow Mix combines peat with coco fibre and has a medium level of fertilisation, positioning it between a light starter mix and the richer Kilomix.
Can Atami Kilomix be used throughout the crop cycle?
Kilomix can provide the growing medium for established plants through continued crop development. Its incorporated nutrient supply will gradually be used by the plant, so additional nutrition may eventually be required according to crop demand and growing conditions.
Is Atami Kilomix suitable for professional horticulture?
Yes. The 50L format can be used for larger container-growing operations and professional horticultural applications where a heavily fertilised peat and perlite substrate is appropriate for the crop.
How should Atami Kilomix be watered?
Water according to plant size, container volume, environmental conditions and crop demand. The aim is to maintain adequate moisture while preserving oxygen within the root zone and avoiding prolonged saturation.
How many 50L bags of Atami Kilomix are on a pallet?
A full pallet contains 70 x 50L bags of Atami Kilomix.
£8.95
Unit price per£8.95
Unit price per203mm (8") x 5m Acoustic Ducting is an insulated flexible ventilation duct designed to help reduce noise transmission while moving air through horticultural extraction and intake systems.
Ventilation fans generate both mechanical noise and sound from the movement of air. Standard uninsulated ducting can allow this noise to travel along the ventilation route, while acoustic ducting uses an insulating layer around the inner duct to help absorb transmitted sound.
This makes acoustic ducting particularly useful for indoor horticulture and controlled growing environments where extraction equipment may operate for long periods and keeping fan and airflow noise under control is important.
Supplied in a 5 metre length with a nominal 203mm / 8" diameter, it can be used with compatible fans, carbon filters and 8-inch ventilation fittings. The flexible construction allows it to be routed around equipment and cut to the required length during installation.
Why choose 203mm acoustic ducting?
How does acoustic ducting work?
A horticultural ventilation system can produce noise from several sources. The fan motor itself creates sound, while fast-moving air can generate additional noise and turbulence as it passes through the ducting.
Acoustic ducting incorporates an insulating layer around the flexible inner air passage. This insulation helps absorb sound energy that would otherwise travel along the ductwork, reducing the amount of ventilation noise transmitted through the system.
It can be particularly useful close to an extraction fan, between a fan and carbon filter, and along sections of duct where transmitted noise would otherwise be noticeable.
Acoustic ducting is designed to reduce noise rather than make a ventilation system completely silent. Fan design, fan speed, airflow, vibration and the layout of the ductwork will all affect the overall noise level.
Ideal for horticultural extraction systems
Effective ventilation is essential for managing temperature, humidity and air exchange in indoor horticultural environments. However, moving large quantities of air can make extraction systems one of the main sources of environmental-control noise.
Replacing basic uninsulated ducting with acoustic ducting can help control the amount of sound transmitted through the ventilation route while still providing a flexible connection between compatible components.
The 203mm / 8" size is suitable for appropriately sized medium to high-capacity ventilation systems using compatible inline fans, carbon filters and duct fittings.
Getting the best airflow from acoustic ducting
Correct duct installation is important for maintaining ventilation performance. Flexible ducting should be extended sufficiently rather than left heavily compressed, as excessive compression creates a less efficient internal airflow path.
Keep the duct route as short and direct as practical. Tight bends, crushed sections and unnecessary changes in direction increase resistance and can reduce the effective airflow delivered by the extraction fan.
Where a change of direction is required, use a gradual bend wherever possible. The 5m duct can also be cut down so that only the length actually required is installed.
Installing 203mm acoustic ducting
Before installation, confirm that the fan, carbon filter and other ventilation components have compatible nominal 203mm / 8" connections.
Fit the flexible inner duct securely over the connection and fasten it using a suitable duct clamp or fixing. HVAC foil tape can also be used where additional sealing is required.
Arrange the surrounding insulation and outer covering neatly around the joint so that the acoustic layer remains as continuous as practical.
Support longer sections of ducting appropriately rather than allowing their full weight to hang directly from a fan, carbon filter or other ventilation component.
Compatible ventilation equipment
Check the actual connection diameter of individual ventilation components before installation, as dimensions can vary slightly between manufacturers.
203mm (8") x 5m Acoustic Ducting product details
| Product type | Insulated acoustic flexible ducting |
|---|---|
| Nominal diameter | 203mm / 8" |
| Length | 5m |
| Duct type | Flexible |
| Construction | Acoustically insulated flexible ventilation duct |
| Primary purpose | Air movement with reduced transmission of ventilation noise |
| Suitable airflow | Extraction & intake |
| Compatible system size | Nominal 203mm / 8" round ventilation systems |
| Suitable applications | Indoor horticulture, propagation areas, controlled growing environments & compatible ventilation installations |
203mm (8") Acoustic Ducting FAQs
What is acoustic ducting?
Acoustic ducting is insulated flexible ventilation duct designed to help absorb and reduce sound transmitted through an extraction or intake system. What size is this acoustic duct?
This version has a nominal 203mm / 8" diameter and is supplied in a 5 metre length. Is this suitable for an 8-inch extraction fan?
Yes, provided the fan has a compatible nominal 203mm / 8" duct connection. Can I use it with an 8-inch carbon filter?
Yes. It can be used to connect compatible 203mm / 8" carbon filters and extraction fans as part of an appropriately sized ventilation system. Does acoustic ducting reduce fan noise?
It helps reduce fan and airflow sound transmitted along the ductwork. It does not eliminate noise produced directly by the fan itself. Is acoustic ducting quieter than ordinary ducting?
Its insulating layer is specifically intended to absorb transmitted sound, making it useful where noise reduction is a priority. Can acoustic ducting be used for horticultural extraction?
Yes. It is well suited to indoor horticultural extraction systems where temperature, humidity and air exchange need to be managed while keeping ventilation noise under control. Can it also be used for air intake?
Yes. Acoustic ducting can be incorporated into compatible intake as well as extraction systems. Can I cut the 5m length?
Yes. The duct can be cut to suit the required ventilation route or divided into shorter sections. Should flexible acoustic ducting be fully extended?
It should be extended sufficiently for the installation rather than left unnecessarily compressed. This helps create a smoother internal path for airflow. Do bends reduce airflow?
Yes. Tight bends increase resistance and turbulence, so gradual changes in direction are preferable wherever possible. Does longer ducting affect extraction performance?
Every length of duct introduces some resistance. Longer runs, multiple bends and additional fittings can therefore reduce the effective airflow of a ventilation system. Where should acoustic ducting be installed?
It can be used throughout a compatible ventilation route. Sections around the extraction fan are particularly useful where transmitted fan noise is a concern. How should acoustic ducting be secured?
Use appropriately sized duct clamps or suitable ventilation fixings, with HVAC foil tape where additional sealing is required. How can horticultural ventilation noise be reduced further?
Correct fan sizing, sensible duct routing, vibration isolation, suitable fan-speed control and ventilation silencers can be combined with acoustic ducting to create a quieter overall system.
Fresh Spagnum Moss - Bag (50 per pallet)
Premium quality natural sphagnum moss, ideal for lining hanging baskets and enhancing moisture retention.
This long-lasting moss is highly absorbent, helping to keep your baskets hydrated while adding a lush, green finish. It also improves soil health by supplying essential nutrients and preventing decay of organic matter.
Perfect for gardeners looking to create vibrant, healthy displays in baskets and planters.
£9.99
Unit price per£9.99
Unit price per
£9.99
Unit price per£9.99
Unit price perThe Neutralizer Road Kit is a compact vehicle odour neutralising system designed for cars, saloons and standard-size SUVs. Rather than operating as a conventional fragranced car air freshener, the system uses an Electronic Molecule Evaporator (EME-320) together with a replaceable 20ml essential-oil cartridge to tackle unwanted odours inside the vehicle.
Developed specifically for vehicle use, the Road Kit has a much faster activation time than the larger Neutralizer systems. Natural accelerants within the Road Kit formulation allow the system to begin working in approximately 5 minutes.
The supplied 20ml Road Kit Cartridge contains The Neutralizer's blend of essential oils derived from plant materials including flowers, fruits, roots and other botanical sources.
The system is particularly useful where persistent smells build up inside an enclosed vehicle and a conventional hanging air freshener or fragrance spray simply masks the problem.
Why choose The Neutralizer Road Kit?
What's included in The Neutralizer Road Kit?
Once the original cartridge has been used, replacement 20ml Road Kit cartridges can be fitted without replacing the EME-320 unit.
How does The Neutralizer Road Kit work?
At the centre of the system is the EME-320 Electronic Molecule Evaporator. The device is designed to control the evaporation of the essential-oil formulation so that volatile components are dispersed through the vehicle interior.
The Road Kit formulation incorporates natural accelerants to reduce the activation period to approximately five minutes. This makes it better suited to vehicle use, where a long warm-up period would be impractical.
The manufacturer describes The Neutralizer as an odour-neutralising system rather than a conventional masking fragrance. This distinction makes the Road Kit particularly useful for persistent smells in enclosed vehicle interiors.
Using The Neutralizer Road Kit in your car
Fit the Road Kit cartridge to the EME-320 in accordance with the manufacturer's instructions and position the assembled unit securely inside the vehicle using the supplied foam cup-holder adaptor.
The Road Kit is designed to connect to the vehicle's 12V electrical socket. Once powered, allow approximately five minutes for the unit and formulation to activate.
The system is designed to provide coverage for a standard-size saloon or SUV. Cartridge life will depend primarily on the amount of time the unit is operated.
Always position the unit securely so that it cannot interfere with the driver, pedals, controls or safe operation of the vehicle.
How long does a Road Kit cartridge last?
The supplied cartridge contains 20ml of The Neutralizer Road Kit formulation.
According to the manufacturer, one cartridge can last for up to 45 days when operated for approximately 2 hours per day.
When operated continuously, manufacturer guidance gives a total service life of approximately 80-92 hours. Actual cartridge life will therefore depend on the operating pattern.
Replacement Road Kit cartridges allow the EME-320 electronic unit to be reused once the original refill has been exhausted.
Suitable for persistent vehicle odours
Vehicle interiors contain upholstery, carpets, headlining and other materials that can retain unwanted smells. The Neutralizer Road Kit is designed for situations where these persistent odours require more than a conventional fragranced car air freshener.
Potential applications include vehicles affected by persistent:
Where the underlying source of an odour is contamination, damp, mould, spilled material or another physical problem, the source should also be identified and properly cleaned or corrected.
Replaceable 20ml Road Kit cartridges
The Road Kit is a refillable system rather than a single-use vehicle air freshener. Once the supplied 20ml cartridge has reached the end of its service life, it can be replaced with the dedicated RKC-20 Road Kit Cartridge.
Road Kit cartridges are specifically intended for the vehicle system, so use the correct replacement cartridge rather than cartridges intended for the Neutralizer Compact or Pro systems.
The Neutralizer Road Kit product details
| Product | The Neutralizer Road Kit |
|---|---|
| Product type | Electronic vehicle odour neutralising system |
| Electronic unit | EME-320 Electronic Molecule Evaporator |
| Cartridge | RKC-20 Road Kit Cartridge |
| Cartridge volume | 20ml |
| Formulation | Essential-oil based botanical formulation with natural accelerants |
| Application | Vehicle interior odour neutralisation |
| Recommended vehicle size | Standard-size saloon/SUV |
| Activation time | Approximately 5 minutes |
| Typical cartridge life | Up to 45 days at approximately 2 hours use per day |
| Continuous cartridge life | Approximately 80-92 hours |
| Power source | Vehicle 12V socket |
| Replaceable cartridge | Yes |
| Installation accessory | Foam cup-holder adaptor included |
| Kit contents | 1 x EME-320, 1 x 20ml RKC-20 Road Kit Cartridge, 1 x foam cup-holder adaptor |
The Neutralizer Road Kit FAQs
What is The Neutralizer Road Kit?
It is a compact electronic odour-neutralising system developed specifically for vehicle interiors. The kit combines an EME-320 Electronic Molecule Evaporator with a replaceable essential-oil cartridge. Does The Neutralizer Road Kit simply mask smells?
The manufacturer describes the system as an odour neutraliser rather than a conventional fragrance designed simply to overpower unwanted smells. How quickly does The Neutralizer Road Kit work?
The Road Kit has an activation time of approximately five minutes, making it considerably faster to activate than the larger Neutralizer systems. What size vehicle is the Road Kit designed for?
The manufacturer specifies the Road Kit for a standard-size saloon or SUV. How long does the 20ml cartridge last?
The cartridge can last for up to approximately 45 days when the unit is operated for around two hours per day. How long will it last if left running continuously?
Manufacturer guidance gives approximately 80-92 hours of cartridge life when the Road Kit is operated continuously. Can I replace the cartridge?
Yes. The EME-320 is reusable and accepts dedicated replacement Road Kit cartridges. How much liquid is in the Road Kit cartridge?
The supplied RKC-20 cartridge contains 20ml of The Neutralizer Road Kit essential-oil formulation. How is the Road Kit powered?
The Road Kit is designed to connect to a vehicle's 12V electrical socket. Where does the unit go in the car?
The kit includes a foam adaptor designed to help position the unit inside a vehicle cup holder. It should always be positioned where it cannot interfere with driving controls or safe vehicle operation. Can The Neutralizer Road Kit help with smoke smells?
It is designed to tackle persistent unwanted vehicle odours, including smoke-related smells. Physical contamination responsible for an odour should still be cleaned wherever possible. Can it be used for pet and food odours?
Yes. The system can be used to tackle a range of persistent unwanted smells within vehicle interiors, including pet and food-related odours. Is this the same as The Neutralizer Compact Kit?
No. The Road Kit is specifically designed for vehicles and has an approximately five-minute activation time. The Compact Kit is intended for larger enclosed spaces and uses a different cartridge and electronic unit. Does the Road Kit include a refill?
Yes. The complete kit includes one 20ml RKC-20 Road Kit Cartridge together with the EME-320 electronic unit. Do I need to replace the complete unit when the oil runs out?
No. The electronic EME-320 unit can be retained and fitted with a new compatible Road Kit cartridge.
£10.00
Unit price per£10.00
Unit price perA highly concentrated irrigation system cleaner that helps prevent biofilm, nutrient deposits and blocked drip lines while keeping water, oxygen and nutrients moving freely through the system.
Aptus System-Clean is a concentrated irrigation cleaner developed to keep nutrient tanks, pipework, drippers and irrigation systems operating efficiently throughout the crop cycle. It is particularly useful where nutrient residues and organic additives can contribute to biofilm and deposits inside irrigation equipment.
Unabsorbed nutrients can accumulate within irrigation systems, encouraging biofilm and creating conditions in which unwanted microbial activity can develop. System-Clean acts as a powerful oxidiser to help control this build-up before it restricts water and nutrient delivery.
Keeping irrigation pathways clean also helps water, dissolved oxygen and nutrients reach the root zone more effectively. This makes System-Clean particularly valuable in drip irrigation and other systems where narrow pipework, emitters and drippers are vulnerable to gradual blockage.
The Aptus Holland UK programme uses System-Clean at just 2.5ml per 10 litres of water. At this concentration, a 1L bottle is sufficient for approximately 4,000 litres of nutrient solution.
Why use Aptus System-Clean?
What is Aptus System-Clean suitable for?
System-Clean is designed for irrigation systems where fertiliser residues, organic additives and biological deposits can gradually accumulate within tanks, pipes, drippers and other components.
It is particularly useful in drip irrigation systems. Narrow emitters can be vulnerable to organic biofilm and nutrient deposits, which can gradually restrict flow and cause uneven irrigation across a crop.
System-Clean also plays an important role when organic Aptus products are delivered through drip irrigation. Products such as Startbooster and Topbooster contain organic material, so Aptus recommends using System-Clean alongside them to help reduce the risk of organic build-up and blocked irrigation lines.
Rather than treating irrigation cleanliness as an occasional maintenance job, System-Clean allows growers to incorporate line hygiene into normal reservoir management throughout the crop cycle.
How to use Aptus System-Clean
Add 2.5ml of Aptus System-Clean per 10 litres of water, equivalent to 0.25ml/L. Aptus recommends adding it to the nutrient tank preferably just before each watering.
For 10L of nutrient solution, use 2.5ml. For 50L, use 12.5ml. For 100L, use 25ml. For a 500L reservoir, use 125ml. For 1,000L, use 250ml.
When preparing a nutrient tank, first mix the normal nutrient programme and adjust the pH. Add System-Clean last, after the pH has been adjusted.
Aptus states that System-Clean remains effective in the nutrient solution for a maximum of approximately 3 days. Where mixed nutrient solution remains in the reservoir for longer than this, add System-Clean again to the complete volume of water to continue helping minimise biofilm and residue build-up.
At the standard Aptus Holland UK rate of 2.5ml per 10L, a 1L bottle treats approximately 4,000 litres of nutrient solution.
Aptus System-Clean 1L product details
| Product | Aptus System-Clean |
|---|---|
| Product type | Irrigation system cleaner |
| Product size | 1L |
| Format | Concentrated liquid |
| Primary use | Maintaining clean irrigation lines & helping prevent biofilm, nutrient deposits & blockages |
| Standard UK application rate | 2.5ml per 10L |
| Application rate per litre | 0.25ml/L |
| When to add | Preferably just before watering |
| Mixing order | Add last to the nutrient tank after adjusting pH |
| 10L reservoir | 2.5ml |
| 50L reservoir | 12.5ml |
| 100L reservoir | 25ml |
| 500L reservoir | 125ml |
| 1,000L reservoir | 250ml |
| Approximate coverage from 1L | 4,000L at the standard UK rate |
| Nutrient solution stability | System-Clean remains active for a maximum of approximately 3 days in mixed nutrient solution |
| Drip irrigation | Particularly suitable for helping maintain clean drippers, emitters & irrigation lines |
| Aptus programme compatibility | Recommended when organic Aptus additives such as Startbooster & Topbooster are used through drip irrigation |
Aptus System-Clean FAQs
What is Aptus System-Clean?
Aptus System-Clean is a concentrated irrigation system cleaner designed to help prevent biofilm, nutrient deposits and blockages from developing inside irrigation equipment.
What does Aptus System-Clean do?
System-Clean acts as a powerful oxidiser within the irrigation system. It helps control biological and nutrient build-up so water, dissolved oxygen and nutrients can continue moving effectively through irrigation lines towards the root zone.
Is Aptus System-Clean a nutrient?
No. System-Clean is an irrigation system maintenance product rather than a base nutrient, fertiliser or plant booster.
How much Aptus System-Clean should I use?
The Aptus Holland UK programme specifies 2.5ml of System-Clean per 10 litres of water, equivalent to 0.25ml/L.
How much System-Clean do I need for 50 litres?
Use 12.5ml of System-Clean for 50 litres of nutrient solution.
How much System-Clean do I need for 100 litres?
Use 25ml of System-Clean for a 100L reservoir at the standard Aptus Holland UK rate.
How much System-Clean do I need for a 500L reservoir?
Use 125ml of System-Clean for a 500L reservoir.
How much System-Clean do I need for a 1,000L reservoir?
Use 250ml of System-Clean for a 1,000L reservoir at the standard application rate.
How much water will 1L of Aptus System-Clean treat?
At 2.5ml per 10L, a 1L bottle treats approximately 4,000 litres of nutrient solution.
When should I add System-Clean to my nutrient tank?
Aptus recommends adding System-Clean preferably just before watering. Prepare the nutrient solution and adjust the pH first, then add System-Clean last.
Should System-Clean be added before or after adjusting pH?
Add System-Clean after the nutrient solution has been mixed and the pH has been adjusted. It should be the final product added to the nutrient tank.
How long does Aptus System-Clean last in a reservoir?
Aptus states that System-Clean lasts for a maximum of approximately 3 days in nutrient solution. If the solution remains in the tank for longer, System-Clean should be added again to the complete reservoir volume.
Does Aptus System-Clean help prevent blocked drippers?
Yes. Preventing biofilm and nutrient deposits is one of the main reasons for using System-Clean, making it particularly useful for drip irrigation systems where narrow emitters are vulnerable to blockages.
Does Aptus System-Clean remove biofilm?
Yes. Aptus specifically identifies the removal and prevention of biofilm build-up within irrigation systems as one of System-Clean's core functions.
Why use System-Clean with Aptus Startbooster?
Startbooster is an organic product, and organic material can increase the risk of biofilm and blocked drip lines. Aptus therefore recommends using System-Clean when Startbooster is applied through drip irrigation.
Why use System-Clean with Aptus Topbooster?
Topbooster is also an organic product. When it is delivered through drip irrigation, System-Clean helps manage the organic and nutrient build-up that could otherwise contribute to restricted drippers and irrigation lines.
Does System-Clean affect nutrient-solution pH?
Aptus Holland states that maintaining a clean irrigation system with System-Clean allows oxygen and nutrients to reach the plant without affecting pH. The manufacturer instructs growers to adjust the nutrient solution pH before adding System-Clean.
Can Aptus System-Clean be used throughout the crop cycle?
Yes. The Aptus feeding programme incorporates System-Clean during vegetative growth and throughout flowering, making it an ongoing irrigation-maintenance product rather than something reserved only for the end of a crop.
£10.00
Unit price per£10.00
Unit price perA highly concentrated 100% organic bloom and maturation booster designed to support flowering, fruit development and final crop quality at just 2ml per 10L.
Aptus Topbooster is a concentrated flowering biostimulant developed to support plants through established flowering and maturation. It works alongside a base NPK fertiliser rather than replacing it, providing a carefully selected combination of organic compounds and trace elements during one of the most demanding stages of crop development.
The formula combines L-amino acids and polysaccharides with boron, iron and molybdenum, natural flowering stimulants and vitamin complexes produced through natural fermentation. Aptus uses this combination to support floral development and maturation while encouraging efficient nutrient uptake and beneficial microbial activity around the root zone.
Topbooster is also designed to support the natural production of fibres, resins and sugars as flowering develops, helping growers focus not simply on crop size but on the quality, appearance and natural characteristics of the finished crop.
Because the formula is highly concentrated, very little product is required. At the standard 2ml per 10L rate, a 250ml bottle provides enough concentrate to prepare approximately 1,250 litres of nutrient solution.
Why choose Aptus Topbooster?
What is Aptus Topbooster suitable for?
Aptus Topbooster is intended for flowering and fruiting crops once they have moved beyond vegetative development and into established flowering. It is used as an additive alongside an appropriate NPK base fertiliser rather than as a standalone feed.
In crop-stage terms, introduce Topbooster once the initial flowering transition has passed and flowering is becoming established. Continue through active flower or fruit development and maturation, stopping before the final flushing stage.
Topbooster can be incorporated into a complete Aptus feeding programme or used alongside another appropriate NPK base fertiliser. Its concentrated formulation makes the 250ml bottle particularly practical for smaller reservoirs and growers who want to introduce Topbooster without moving straight to a larger pack size.
How to use Aptus Topbooster
Use 2ml of Aptus Topbooster per 10 litres of water, equivalent to 0.2ml/L or a dilution of 1:5000. Introduce it once flowering is established and continue through active flowering and maturation before the final flush.
For 10L of nutrient solution, use 2ml. For 50L, use 10ml. For 100L, use 20ml. For a 500L reservoir, use 100ml. For 1,000L, use 200ml.
At the standard 2ml per 10L application rate, a 250ml bottle prepares approximately 1,250 litres of nutrient solution.
Aptus states that Topbooster can also be increased gradually for healthy, vigorous crops, from the standard 2ml up to a maximum of 4ml per 10L as flowering and maturation progress. The standard 2ml per 10L rate remains the appropriate starting point.
Topbooster is a 100% organic product. In drip irrigation systems, organic material can increase the risk of biofilm and blocked drippers, so Aptus recommends using System-Clean alongside Topbooster.
Do not leave diluted Topbooster standing in a reservoir for longer than 2 – 3 days. Prepare fresh nutrient solution regularly to reduce organic biofilm build-up within irrigation equipment.
Topbooster is a flowering additive rather than a complete base nutrient. Always use it alongside an appropriate NPK fertiliser.
Aptus Topbooster 250ml product details
| Product | Aptus Topbooster |
|---|---|
| Product type | Organic bloom & maturation booster |
| Product size | 250ml |
| Format | Highly concentrated liquid |
| Organic formulation | 100% organic |
| Standard application rate | 2ml per 10L |
| Application rate per litre | 0.2ml/L |
| Standard dilution | 1:5000 |
| Higher-intensity application | Can be progressively increased up to 4ml per 10L for healthy, vigorous crops |
| Application stage | Established flowering through active flowering & maturation |
| Key components | L-amino acids, polysaccharides, natural flowering stimulants & fermentation-derived vitamin complexes |
| Trace elements | Boron (B), iron (Fe) & molybdenum (Mo) |
| 10L solution | 2ml |
| 50L solution | 10ml |
| 100L solution | 20ml |
| 500L solution | 100ml |
| 1,000L solution | 200ml |
| Approximate solution from 250ml | 1,250L at the standard rate |
| Base nutrient requirement | Use alongside an appropriate NPK base fertiliser |
| Drip irrigation | Use alongside Aptus System-Clean to help manage organic build-up |
| Mixed reservoir guidance | Do not leave diluted Topbooster in the reservoir for more than 2 – 3 days |
Aptus Topbooster FAQs
What is Aptus Topbooster?
Aptus Topbooster is a highly concentrated organic bloom and maturation booster. It complements an NPK base fertiliser and is designed to support flowering, fruit development and maturation.
Is Aptus Topbooster organic?
Yes. Aptus describes Topbooster as a 100% organic product containing naturally derived active ingredients.
What is in Aptus Topbooster?
Topbooster contains L-amino acids, polysaccharides, boron, iron, molybdenum, natural flowering stimulants and vitamin complexes produced through natural fermentation.
What does Aptus Topbooster do?
Topbooster supports the flowering and maturation process. Its formulation is designed to assist floral development, nutrient uptake and beneficial microbial populations while encouraging the fibres, resins and sugars associated with crop development and final quality.
How much Aptus Topbooster should I use?
The standard Aptus application rate is 2ml per 10 litres of water. This is equivalent to 0.2ml/L or a 1:5000 dilution.
How much Topbooster do I need for 50 litres?
Use 10ml of Topbooster for 50 litres of nutrient solution at the standard application rate.
How much Topbooster do I need for 100 litres?
Use 20ml of Topbooster for a 100L reservoir at the standard rate.
How much Topbooster do I need for a 500L reservoir?
Use 100ml of Topbooster for a 500L reservoir at the standard 2ml per 10L application rate.
How much nutrient solution will 250ml of Aptus Topbooster make?
At the standard 0.2ml/L application rate, a 250ml bottle prepares approximately 1,250 litres of nutrient solution.
When should I start using Aptus Topbooster?
Introduce Topbooster once the initial flowering transition has passed and flowering is becoming established. Continue through active flowering and maturation before stopping for the final flush.
Can I increase the Aptus Topbooster dosage?
Yes. Aptus states that healthy, vigorous plants can receive a progressively higher dose, increasing from the standard 2ml up to 4ml per 10L as the flowering cycle progresses.
Is Aptus Topbooster a PK booster?
Topbooster is primarily a bloom and maturation biostimulant rather than Aptus's dedicated PK fertiliser. Its formulation centres on amino acids, polysaccharides, trace elements, natural flowering stimulants and vitamin complexes.
Is Aptus Topbooster a base nutrient?
No. Topbooster is an additive. Aptus specifies that it should be used alongside an appropriate NPK base fertiliser.
Can Aptus Topbooster be used with other base nutrients?
Yes. Topbooster can be incorporated alongside an appropriate NPK base fertiliser, so growers do not need to use it exclusively with an Aptus base nutrient.
Can Aptus Topbooster be used in drip irrigation?
Yes, but because Topbooster is organic, Aptus recommends using System-Clean alongside it in drip irrigation systems to help manage the risk of organic build-up and blocked lines.
How long can mixed Aptus Topbooster stay in a reservoir?
Do not leave diluted Topbooster in the reservoir for longer than 2 – 3 days. Aptus gives this guidance to reduce organic biofilm build-up and the risk of blocked irrigation lines.
Does Aptus Topbooster contain sugars?
Yes. Topbooster contains polysaccharides. Aptus explains that these sugars support nutrient uptake and beneficial microbial populations, and its FAQ states that additional sugars are not required when using Topbooster.
What is the difference between Aptus Topbooster and Super-PK?
Topbooster is an organic bloom and maturation biostimulant based around amino acids, polysaccharides, trace elements, flowering stimulants and vitamins. Super-PK is Aptus's concentrated phosphorus and potassium flowering product, so the two perform different roles within an Aptus feeding programme.
£10.00
Unit price per£10.00
Unit price perThe Krystal Dual Fan Speed Controller is a thermostatic ventilation controller designed to manage an intake fan and extraction fan together, automatically adjusting ventilation according to the measured temperature.
With two independently adjustable fan-speed controls, the Krystal controller allows the balance between intake and extraction airflow to be set while its remote temperature sensor monitors the environment. Set the required target temperature and the controller automatically manages the connected fans to help maintain a more stable environment.
Two UK power outlets are built directly into the controller, providing dedicated connections for the intake and extraction fans. Each outlet can control a compatible fan with a maximum power of 320W.
A digital temperature display and LED indicators provide an immediate view of target and current temperatures, making the Krystal Dual Fan Speed Controller a straightforward solution for automated ventilation without the complexity of a larger environmental-control system.
Why choose the Krystal Dual Fan Speed Controller?
Automatic temperature-based ventilation
Temperature can change substantially as lighting, external weather and other environmental conditions change. A ventilation system running at one fixed speed cannot respond automatically to those variations.
The Krystal Dual Fan Speed Controller uses its temperature sensor to continuously monitor the environment. Once the required target temperature has been selected, the controller adjusts the connected fans accordingly.
This allows ventilation to respond to environmental demand rather than requiring repeated manual adjustment of the fans.
The result is a more controlled approach to air exchange, particularly where extraction is the primary method used to remove excess heat.
Control intake & extraction together
The controller provides two mains power outlets, allowing both sides of a balanced ventilation system to be managed from the same unit.
Extraction fan
The extraction fan removes warm air from the controlled environment and provides the primary air exchange.
Intake fan
The intake fan supplies replacement air as the extraction system removes air from the environment.
Using both fans through one controller allows their operation to be coordinated while still giving the user control over the balance between intake and extraction airflow.
Adjustable airflow & negative pressure
Intake and extraction systems do not necessarily need to operate at identical airflow rates. In many filtered extraction systems, slightly greater extraction than intake is desirable to maintain negative pressure.
The Krystal controller provides separate adjustment for the two connected fans, allowing the intake/extraction balance to be tuned for the installation.
Actual pressure balance will depend on the fans themselves as well as carbon filters, duct length, bends, intake restrictions and other components in the ventilation system.
Fan-speed settings should therefore be adjusted according to the behaviour of the complete installed system rather than simply setting both controls to identical positions.
Reduce unnecessary ventilation noise
A ventilation fan normally produces more motor and airflow noise as its speed increases. Running both intake and extraction fans at maximum output continuously can therefore create considerably more noise than necessary.
By allowing fan speeds to be adjusted and ventilation to respond to temperature, the Krystal controller can help avoid unnecessarily high airflow when environmental demand is lower.
For further noise reduction, combine correctly controlled fan speeds with appropriately sized ducting, smooth airflow routes, vibration isolation and acoustic ducting where required.
Temperature sensor for accurate control
The supplied temperature sensor should be positioned in a representative part of the controlled environment so the controller receives a useful indication of the temperature experienced by the crop.
Avoid positioning the sensor directly beside heaters, lighting equipment, air intakes or extraction points, as these can produce localised temperatures that do not represent the wider environment.
Keeping the sensor away from direct radiant heat and strong airflow will generally provide a more representative measurement for automatic fan control.
Fan compatibility
The Krystal Dual Fan Speed Controller is intended for compatible mains-powered AC ventilation fans that can be controlled using this type of fan-speed controller.
Each outlet supports a fan with a maximum specified power of 320W. Always check the fan manufacturer's electrical and speed-control requirements before connecting equipment.
This is not an EC signal controller. EC fans that require a dedicated 0-10V, PWM, digital or manufacturer-specific low-voltage control signal should be used with the appropriate EC fan controller instead.
Setting up the Krystal Dual Fan Speed Controller
Fans should remain within the controller's specified electrical rating, and the ventilation system should be correctly sized for the environment being controlled.
Krystal Dual Fan Speed Controller product details
| Brand | Krystal Ventilation |
|---|---|
| Product type | Dual thermostatic fan speed controller |
| Primary function | Automatic temperature-based intake & extraction fan control |
| Fan outputs | 2 |
| Maximum fan power | 320W per outlet |
| Fan configuration | Intake & extraction |
| Fan-speed adjustment | Separate intake & extraction adjustment |
| Temperature control | Automatic thermostatic control |
| Temperature sensor | Included |
| Display | Digital temperature display |
| Status indication | LED indicators |
| Suitable fan type | Compatible mains-powered AC ventilation fans |
| EC control signal | No |
| Outer case quantity | 16 controllers |
Krystal Dual Fan Speed Controller FAQs
What does the Krystal Dual Fan Speed Controller do?
It controls an intake fan and extraction fan from one unit, using a temperature sensor and adjustable fan-speed controls to help maintain the selected environmental temperature. How many fans can the Krystal controller operate?
The controller has two power outlets, allowing one compatible intake fan and one compatible extraction fan to be connected. What is the maximum fan power?
Each of the two fan outlets can control a compatible fan with a maximum power of 320W. Does the Krystal controller automatically respond to temperature?
Yes. Set the required target temperature and the controller uses its supplied temperature sensor to adjust ventilation accordingly. Can I adjust the intake and extraction fans separately?
Yes. The intake and extraction fan speeds can be adjusted to establish the required balance between incoming and outgoing airflow. Can the Krystal controller help maintain negative pressure?
Yes. By setting the extraction airflow higher than the intake airflow, the controller can be used as part of a ventilation system designed to maintain negative pressure. The actual pressure achieved will depend on the complete installation. Does the controller include a temperature sensor?
Yes. A temperature sensor is included so the controller can monitor the environment and adjust fan operation in response to temperature. Does it display the current temperature?
Yes. The controller features a digital display and LED indicators for monitoring target and current temperature information. Can I use only an extraction fan?
The controller is designed around dual-fan control, but the ventilation requirements of the installation determine whether active intake is necessary. Where only one fan is connected, always ensure the equipment and controller are being used appropriately. Will controlling fan speed reduce noise?
Reducing unnecessary fan speed can reduce motor and airflow noise. Overall noise will also depend on the fans, ducting, filters, vibration and airflow restrictions. Can I use the Krystal controller with a carbon-filter extraction system?
Yes. It can control compatible extraction and intake fans used within a filtered ventilation system, provided the fans are suitable for speed control and remain within the controller's electrical rating. Can this controller operate EC fans?
This controller is intended for compatible mains-powered AC fans. EC fans requiring 0-10V, PWM or another dedicated low-voltage speed-control signal should use the appropriate EC controller specified for the fan. Where should I place the temperature sensor?
Place the sensor in a representative area away from direct heat sources, strong intake or extraction airflow and other localised conditions that could distort the temperature reading. Why control both intake and extraction fans?
Controlling both fans allows total ventilation and the balance between incoming and outgoing air to be adjusted together. This can provide more stable temperature and pressure control than operating two fans independently. How many Krystal Dual Fan Speed Controllers are in an outer case?
The outer case quantity for this SKU is 16 controllers.
£10.45
Unit price per£10.45
Unit price per102mm (4") x 5m Mute Silent Ducting is an acoustically insulated flexible ventilation duct designed to help reduce fan and airflow noise transmitted through extraction and intake systems.
Standard flexible ducting provides a convenient route for moving air, but it can also transmit noise generated by an extraction fan and turbulent airflow. In smaller indoor growing environments, where ventilation equipment is often positioned relatively close to the growing area, this noise can be particularly noticeable.
Mute Silent Ducting uses an insulated construction around the flexible inner airflow duct to help absorb transmitted sound. It provides a practical upgrade from standard uninsulated ducting where quieter ventilation is required.
With a 102mm (4") nominal diameter and 5m length, this version is ideal for compatible 4-inch extraction fans, carbon filters and ventilation equipment used in smaller grow rooms, grow tents, propagation areas and other indoor ventilation installations.
Why choose 102mm acoustic silent ducting?
How does acoustic ducting reduce noise?
Ventilation noise can originate from several sources. The fan motor itself produces sound, while the movement of air through the fan, ducting, filters and fittings can create additional turbulence and noise.
Standard ducting can carry this sound along the ventilation route. Acoustic ducting adds an insulating layer around the flexible inner duct to help absorb transmitted noise before it travels through the system.
This makes it particularly useful immediately before or after an extraction fan, between compatible ventilation components and along exhaust routes where sound from the ventilation system would otherwise be noticeable.
Acoustic ducting is designed to reduce transmitted noise rather than make an extraction system completely silent. Fan vibration, motor noise, airflow velocity and the overall system design can still influence the final sound level.
Quieter 4-inch grow room and grow tent ventilation
102mm-class ventilation equipment is commonly used in smaller indoor horticultural installations where heat, humidity and stale air need to be removed without installing unnecessarily large extraction equipment.
In a compact grow tent or propagation area, the fan and ducting are often located relatively close to the growing space. This can make ventilation noise more apparent than it would be in a larger installation.
Using acoustic ducting helps reduce sound transmitted along the ventilation route while retaining the flexibility required to route ductwork through tent ports, around equipment and towards the extraction point.
Maintaining good airflow
Good duct installation is important for maintaining the performance of any extraction system. Flexible ducting should be routed as directly as practical and unnecessary restrictions should be avoided.
Extend the duct sufficiently for the required route rather than leaving large sections heavily compressed. This reduces excessive internal corrugation and provides a smoother route for moving air.
Avoid crushing the duct and minimise very tight bends. Every bend, carbon filter, silencer, reducer and length of duct adds resistance to the system, so keeping the airflow path straightforward helps the fan operate effectively.
This is particularly relevant with 102mm systems, where restrictive routing can have a noticeable effect on the airflow available from a smaller extraction fan.
Installing 102mm Mute Silent Ducting
Measure the required ventilation route before cutting. The 5m length can be installed as one continuous run or divided into shorter sections depending on the layout.
When connecting to a compatible fan, carbon filter, silencer or rigid fitting, secure the inner duct over the connection using an appropriately sized duct clamp or clip.
Arrange the surrounding insulation and outer covering neatly around the connection. Suitable HVAC foil tape can also be used where additional sealing is required.
Support longer sections of insulated ducting rather than allowing their full weight to hang directly from the extraction fan, carbon filter or another ventilation component.
Compatible 102mm / 4" ventilation equipment
This ducting is intended for nominal 102mm (4") round ventilation systems and can be used with appropriately sized components including:
Always check the actual connection diameter of adjoining equipment before installation. Nominal metric and imperial ventilation sizes are commonly used together, but exact connection dimensions can vary slightly between manufacturers.
102mm (4") x 5m Mute Silent Ducting product details
| Product type | Acoustic insulated flexible ventilation ducting |
|---|---|
| Nominal diameter | 102mm / 4" |
| Length | 5m |
| Duct type | Flexible |
| Construction | Insulated acoustic ducting |
| Primary purpose | Ventilation with reduced transmission of fan and airflow noise |
| Suitable airflow | Extraction & intake |
| Compatible system size | Nominal 102mm / 4" round ventilation systems |
| Suitable applications | Grow tents, grow rooms, propagation areas, indoor horticulture & general ventilation installations |
102mm (4") Mute Silent Ducting FAQs
What is acoustic ducting?
Acoustic ducting is flexible ventilation ducting surrounded by insulation designed to help reduce sound transmitted through the ventilation system. What size is this silent ducting?
It has a nominal diameter of 102mm, approximately 4 inches, and is supplied in a 5m length. Is this suitable for a 4-inch extraction fan?
Yes, provided the fan has a compatible nominal 102mm / 4" connection. Is this suitable for a grow tent?
Yes. Its 102mm nominal diameter makes it particularly useful with compatible 4-inch ventilation equipment used in smaller grow tents and indoor growing environments. Will acoustic ducting completely silence my extraction fan?
No. It helps reduce sound transmitted through the ductwork, but motor noise, vibration and airflow can still contribute to the overall noise produced by the system. Is acoustic ducting quieter than standard flexible ducting?
Its insulated construction is specifically intended to reduce transmitted sound compared with basic uninsulated flexible ventilation ducting. Can I connect it to a carbon filter?
Yes. It can be used with compatible 102mm / 4" carbon filters, extraction fans and other appropriately sized ventilation equipment. Can acoustic ducting be used with a silencer?
Yes. It can be combined with a compatible ventilation silencer where additional reduction of transmitted ventilation noise is required. Can the 5m duct be cut into shorter sections?
Yes. The ducting can be cut to suit the installation using suitable tools, taking care when cutting the inner duct, reinforcement and surrounding insulation. Can this ducting be used for air intake?
Yes. It can be incorporated into compatible intake systems as well as extraction installations. Does flexible ducting reduce airflow?
All ductwork introduces some resistance. Keeping the duct reasonably extended and avoiding unnecessary length, compression and tight bends helps minimise additional pressure loss. Should acoustic ducting be stretched out?
It should be extended sufficiently for the required route rather than left heavily compressed. This helps provide a less restrictive internal airflow path. Can I bend it around corners?
Yes. Its flexible construction allows changes in direction, although very tight bends that crush or significantly restrict the inner duct should be avoided. How should 4-inch acoustic ducting be secured?
Secure the inner duct to compatible fittings using an appropriately sized duct clamp or clip. Suitable HVAC foil tape can be used where additional sealing is required. What else can help reduce grow room extraction noise?
Correctly sized ducting, smooth airflow routes, vibration isolation, suitable fan-speed control and compatible acoustic silencers can all contribute to a quieter ventilation system.
£10.50
Unit price per£10.50
Unit price per127mm (5") x 10m Acoustic Ducting is an insulated flexible ventilation duct designed to help reduce fan and airflow noise transmitted through extraction and intake systems.
Ventilation fans generate sound from both the fan itself and the movement of air through the system. Standard uninsulated ducting can allow this noise to travel along the ventilation route, while acoustic ducting incorporates an insulating layer around the inner duct to help absorb transmitted sound.
This makes it particularly useful for indoor horticulture, propagation areas and controlled growing environments where ventilation equipment may operate for extended periods and reducing unnecessary noise is desirable.
Supplied in a generous 10 metre length with a nominal 127mm / 5" diameter, it can be connected to compatible fans, carbon filters and ventilation fittings. The flexible construction allows it to be routed around equipment and cut into the exact lengths required for the installation.
Why choose 127mm acoustic ducting?
How does acoustic ducting reduce noise?
Noise within a ventilation system can come from the fan motor, vibration and turbulent air moving through the ductwork. Some of this sound can travel along ordinary flexible duct and become noticeable elsewhere in the installation.
Acoustic ducting surrounds the flexible inner airflow passage with insulation designed to absorb transmitted sound. This helps reduce the amount of fan and airflow noise travelling through the duct route.
It can be particularly useful around extraction fans, between compatible fans and carbon filters, and along longer sections of ventilation duct where transmitted noise needs to be controlled.
Acoustic ducting is intended to reduce transmitted noise rather than make a ventilation system completely silent. Fan design, fan speed, airflow velocity, vibration and installation quality all contribute to the final noise level.
Acoustic ducting for indoor horticulture
Reliable ventilation helps manage temperature, humidity and air exchange within controlled growing environments. Extraction and intake equipment can, however, become a significant source of noise when operating continuously or at higher fan speeds.
Acoustic ducting provides a practical way to reduce sound transmission while maintaining the flexibility needed to connect ventilation equipment and route air around an installation.
The 127mm / 5" size is suitable for compatible ventilation systems using appropriately sized inline fans, carbon filters, connectors and other round duct fittings.
The 10m length is particularly useful for larger installations, longer ventilation routes or applications where several separate sections of acoustic ducting are required.
Getting the best airflow from acoustic ducting
Good installation is important for maintaining ventilation performance. Flexible ducting should be extended sufficiently rather than left heavily compressed, helping create a smoother internal path for moving air.
Keep the duct route as short and direct as practical. Tight bends, crushed sections and unnecessary changes in direction create additional resistance and can reduce the effective airflow delivered by the fan.
Where the duct needs to change direction, use gradual bends wherever possible. Although this product provides 10 metres of ducting, there is no need to use the entire length in one continuous run.
Cutting each section to the length actually required can help minimise unnecessary resistance while leaving the remaining duct available for other parts of the ventilation installation.
Installing 127mm acoustic ducting
Before installation, check that the fan, carbon filter and other ventilation components have compatible nominal 127mm / 5" connections.
Fit the flexible inner duct securely over the ventilation connection and fasten it using a suitably sized duct clamp or appropriate fixing. HVAC foil tape can also be used where additional sealing is required.
Arrange the surrounding insulation and outer covering neatly around the completed connection so that the acoustic layer remains as continuous as practical.
Longer sections should be supported appropriately rather than allowing the entire weight of the ducting to hang directly from a fan, filter or connecting fitting.
Compatible ventilation equipment
Check the actual connection diameter of individual ventilation components before installation, as dimensions can vary slightly between manufacturers.
127mm (5") x 10m Acoustic Ducting product details
| Product type | Insulated acoustic flexible ducting |
|---|---|
| Nominal diameter | 127mm / 5" |
| Length | 10m |
| Duct type | Flexible |
| Construction | Acoustically insulated flexible ventilation duct |
| Primary purpose | Air movement with reduced transmission of ventilation noise |
| Suitable airflow | Extraction & intake |
| Compatible system size | Nominal 127mm / 5" round ventilation systems |
| Suitable applications | Indoor horticulture, propagation areas, controlled growing environments & compatible ventilation installations |
127mm (5") Acoustic Ducting FAQs
What is acoustic ducting?
Acoustic ducting is insulated flexible ventilation duct designed to help absorb and reduce sound transmitted through an extraction or intake system. What size is this acoustic duct?
This version has a nominal diameter of 127mm, equivalent to 5 inches, and is supplied in a 10 metre length. Is this suitable for a 5-inch extraction fan?
Yes, provided the fan has a compatible nominal 127mm / 5" connection. Can it be used with a 5-inch carbon filter?
Yes. It can be used with compatible 127mm / 5" carbon filters and extraction fans as part of an appropriately sized ventilation system. Does acoustic ducting reduce fan noise?
It helps reduce fan and airflow sound transmitted along the ductwork. It does not completely eliminate noise generated directly by the fan. Is acoustic ducting quieter than ordinary flexible ducting?
Its insulating layer is specifically intended to absorb transmitted sound, making it useful where reducing ventilation noise is important. Can acoustic ducting be used for horticultural extraction?
Yes. It is well suited to indoor horticultural ventilation systems where temperature, humidity and air exchange need to be managed while keeping transmitted ventilation noise under control. Can it be used for air intake?
Yes. Acoustic ducting can be incorporated into compatible intake as well as extraction systems. Can I cut the 10m duct into shorter sections?
Yes. It can be cut to suit the required ventilation route or divided into several individual sections. Do I need to use the full 10 metre length?
No. Use only the amount required for the installation. Keeping duct routes reasonably short and direct generally helps minimise unnecessary airflow resistance. Should flexible acoustic ducting be fully extended?
It should be extended sufficiently for the installation rather than left unnecessarily compressed. This helps create a smoother internal path for airflow. Do bends in acoustic ducting affect airflow?
Yes. Tight bends increase resistance and turbulence, so smooth and gradual changes in direction are preferable wherever possible. Does a longer duct run affect extraction performance?
Every length of duct introduces some resistance. Longer runs, multiple bends and additional fittings can therefore reduce the effective airflow of a ventilation system. How should a long run of acoustic ducting be supported?
Longer sections should be supported at suitable intervals so that their weight is not carried entirely by the fan, filter or connecting fittings. How can horticultural ventilation noise be reduced further?
Correct fan sizing, sensible duct routing, vibration isolation, suitable fan-speed control and ventilation silencers can be combined with acoustic ducting to create a quieter overall system.
Pipeline Flexible Rain Barrel 25L
The Pipeline Flexible Rain Barrels provide a simple and efficient way to collect and store rainwater, helping you save money and reduce water waste in the garden. Available in 7 convenient sizes, these innovative rain barrels can be set up in minutes and fold flat for effortless transport and compact storage when not in use. Ideal for gardeners with limited space, they offer all the benefits of a traditional water butt without the bulk of rigid plastic tanks.
Crafted from durable, weather-resistant materials, Pipeline Flexible Rain Barrels are designed to withstand outdoor conditions season after season. Their lightweight yet robust construction makes them easy to handle, while still delivering reliable water storage for irrigation, cleaning, or emergency use. A practical and space-saving alternative, these flexible tanks are a must-have solution for modern, sustainable gardening.
Pipeline Flexible Rain Barrel 50L
The Pipeline Flexible Rain Barrels provide a simple and efficient way to collect and store rainwater, helping you save money and reduce water waste in the garden. Available in 7 convenient sizes, these innovative rain barrels can be set up in minutes and fold flat for effortless transport and compact storage when not in use. Ideal for gardeners with limited space, they offer all the benefits of a traditional water butt without the bulk of rigid plastic tanks.
Crafted from durable, weather-resistant materials, Pipeline Flexible Rain Barrels are designed to withstand outdoor conditions season after season. Their lightweight yet robust construction makes them easy to handle, while still delivering reliable water storage for irrigation, cleaning, or emergency use. A practical and space-saving alternative, these flexible tanks are a must-have solution for modern, sustainable gardening.
Pipeline Flexible Tank 100L
The Pipeline Flexible Tank provides a simple and efficient way to collect and store rainwater, helping you save money and reduce water waste in the garden. Available in 7 convenient sizes, these innovative rain barrels can be set up in minutes and fold flat for effortless transport and compact storage when not in use. Ideal for gardeners with limited space, they offer all the benefits of a traditional water butt without the bulk of rigid plastic tanks.
Crafted from durable, weather-resistant materials, Pipeline Flexible Rain Barrels are designed to withstand outdoor conditions season after season. Their lightweight yet robust construction makes them easy to handle, while still delivering reliable water storage for irrigation, cleaning, or emergency use. A practical and space-saving alternative, these flexible tanks are a must-have solution for modern, sustainable gardening.