Commercial Products
Commercial Products
Professional Growing Media
Plant Nutrition
Plant Health
Sprayers & Protective Clothing
Pots, Planters & Trays
Propagation
Baskets & Planters
Fabrics & Netting
Environment
Plant Lighting
Irrigation
Plant Support & Tree Care
Equipment
Tools
Plant Labels
Packaging
Lawn Care
Retail Products
Retail Products
Growing Media
Plant Nutrition
Plant Health
Pots, Planters & Tanks
Propagation
Baskets & Planters
Fabrics & Netting
Environment
Plant Lighting
Plant Support
Equipment
Tools
£8.44
Unit price perEstimated delivery between September 19 and September 21.
A highly concentrated mono-silicic acid plant enhancer that improves nutrient utilisation, strengthens plant structure and helps crops cope with environmental stress at just 1.5ml per 10L.
Aptus Regulator is a concentrated nutrition manager and anti-stress plant enhancer designed to improve the way plants absorb and utilise the nutrients already present in their feeding programme. Aptus describes it as the cornerstone of its plant nutrition system because it works alongside other nutrients rather than simply adding another conventional fertiliser to the reservoir.
The formula combines mono-silicic acid with boron and molybdenum. Mono-silicic acid acts as an efficient nutrient transporter, while boron supports calcium uptake and fibre production. Molybdenum plays an important role in nitrogen metabolism and the movement of nitrogen from older leaves towards developing growth.
Regulator also supports stronger cell structure and a tougher epidermal layer, helping produce sturdier plants and thicker stems. This structural support can help crops cope with environmental stresses including heat, wind and drought, as well as salinity caused by nutrient salt accumulation.
Because Regulator is exceptionally concentrated, only a very small amount is required. The standard rate is 1.5ml per 10 litres of water, giving a 50ml bottle enough concentrate to treat approximately 333 litres.
Regulator is designed to work throughout the crop cycle as part of an ongoing nutrition programme. Unlike products aimed solely at rooting or flowering, its role is to support nutrient utilisation, plant structure and stress tolerance as new plant tissue develops.
It is particularly useful where growers want stronger stems, more compact development and better control of excessive internodal stretching. Aptus also recommends Regulator where environmental conditions such as heat, wind or drought place additional stress on the crop.
Regulator can also be useful where nutrient availability is present but uptake is less efficient than expected. Rather than simply increasing fertiliser concentration, its mono-silicic acid-based formulation is designed to improve the bioavailability and utilisation of the existing nutrient programme.
Aptus recommends maintaining a continuous supply because silicon deposited into plant cell membranes remains there, while newly developing cells still require an ongoing supply as the plant continues to grow.
Use 1.5ml of Aptus Regulator per 10 litres of water, equivalent to 0.15ml/L or a dilution of approximately 1:6660.
For 10L of water, use 1.5ml. For 50L, use 7.5ml. For 100L, use 15ml. For a 250L reservoir, use 37.5ml.
At the standard 0.15ml/L rate, a 50ml bottle treats approximately 333 litres of water.
Always add Regulator first. Fill the reservoir with clean water, add the measured quantity of Regulator and mix thoroughly until it is evenly dispersed. Only then add base nutrients, boosters or other compatible crop inputs.
Accurate measurement is important because Regulator is highly concentrated. For very small reservoirs, Aptus states that one drop is approximately 0.05ml. This means a 1L solution requires approximately 0.15ml, or 3 drops, at the standard rate.
Keep the concentrate clean. Do not allow water or dirt to enter the bottle and use only clean, dry syringes, pipettes or measuring equipment when dispensing Regulator.
| Product | Aptus Regulator |
|---|---|
| Product type | Nutrition manager & anti-stress plant enhancer |
| Product size | 50ml |
| Format | Highly concentrated liquid |
| Key silicon form | Mono-silicic acid |
| Other key elements | Boron (B) & molybdenum (Mo) |
| Standard application rate | 1.5ml per 10L |
| Application rate per litre | 0.15ml/L |
| Standard dilution | Approximately 1:6660 |
| Application stage | Throughout active plant development |
| 10L solution | 1.5ml |
| 50L solution | 7.5ml |
| 100L solution | 15ml |
| 250L solution | 37.5ml |
| Approximate coverage from 50ml | 333L at the standard rate |
| Small-volume measurement | Approximately 0.15ml or 3 drops per 1L |
| Mixing order | Add first to a reservoir filled with clean water, before nutrients, boosters or other compatible crop inputs |
| Primary functions | Nutrient utilisation, structural support, stress tolerance & compact plant development |
Aptus Regulator is a highly concentrated nutrition manager and anti-stress plant enhancer. It is designed to improve nutrient uptake and utilisation while supporting stronger plant structure and greater tolerance to environmental stress.
Regulator contains mono-silicic acid as its key nutrient-transport component, together with boron and molybdenum.
Regulator contains silicon in the form of mono-silicic acid, but its role extends beyond simply supplying silicon. Aptus positions it as a nutrition manager that supports nutrient uptake, plant structure and resistance to environmental stress.
Aptus describes mono-silicic acid as a nutrient transporter. It supports the absorption and utilisation of other nutrients while contributing to stronger cell structure.
Boron supports calcium uptake and stimulates the production of plant fibres, contributing to stronger structural development.
Molybdenum plays an important role in nitrogen metabolism. Aptus explains that it supports the movement of nitrogen from older lower leaves towards newer developing foliage when required.
Use 1.5ml of Regulator per 10 litres of water. This is equivalent to 0.15ml/L or approximately a 1:6660 dilution.
Use 7.5ml of Regulator for 50 litres of water at the standard application rate.
Use 15ml of Regulator for a 100L reservoir.
At the standard 0.15ml/L rate, a 50ml bottle treats approximately 333 litres.
Yes. This mixing order is important. Add Regulator to a reservoir filled with clean water first and mix thoroughly. Add the base fertiliser, boosters and other compatible products afterwards.
Yes. Aptus recommends maintaining a continuous supply of Regulator as plants develop because silicon already deposited within cell membranes remains there, while newly formed cells still require an ongoing supply.
Yes. Aptus specifically recommends Regulator to help plants cope with environmental stresses such as excessive heat. The standard application rate is suitable for this purpose.
Regulator can help where nutrients are already present but their availability or utilisation is limiting plant performance. Aptus notes that it can often help correct nutrient deficiencies by making existing nutrients more bioavailable.
Regulator can help control excessive internodal spacing and encourage more compact plant development. Aptus identifies internode management as one of the practical uses of the product.
Yes. Aptus identifies improved resistance to salinity caused by nutrient salt build-up as one of the benefits of Regulator.
Aptus states that Regulator helps reduce transpiration, which means reducing moisture loss through the leaves.
Because Regulator is extremely concentrated, use a clean, dry syringe or pipette for accurate measurement. Aptus also gives approximately 0.05ml per drop as a guide, so 1 litre of water requires around 3 drops at the standard rate.
£8.44
Unit price perA highly concentrated mono-silicic acid plant enhancer that improves nutrient utilisation, strengthens plant structure and helps crops cope with environmental stress at just 1.5ml per 10L.
Aptus Regulator is a concentrated nutrition manager and anti-stress plant enhancer designed to improve the way plants absorb and utilise the nutrients already present in their feeding programme. Aptus describes it as the cornerstone of its plant nutrition system because it works alongside other nutrients rather than simply adding another conventional fertiliser to the reservoir.
The formula combines mono-silicic acid with boron and molybdenum. Mono-silicic acid acts as an efficient nutrient transporter, while boron supports calcium uptake and fibre production. Molybdenum plays an important role in nitrogen metabolism and the movement of nitrogen from older leaves towards developing growth.
Regulator also supports stronger cell structure and a tougher epidermal layer, helping produce sturdier plants and thicker stems. This structural support can help crops cope with environmental stresses including heat, wind and drought, as well as salinity caused by nutrient salt accumulation.
Because Regulator is exceptionally concentrated, only a very small amount is required. The standard rate is 1.5ml per 10 litres of water, giving a 50ml bottle enough concentrate to treat approximately 333 litres.
Regulator is designed to work throughout the crop cycle as part of an ongoing nutrition programme. Unlike products aimed solely at rooting or flowering, its role is to support nutrient utilisation, plant structure and stress tolerance as new plant tissue develops.
It is particularly useful where growers want stronger stems, more compact development and better control of excessive internodal stretching. Aptus also recommends Regulator where environmental conditions such as heat, wind or drought place additional stress on the crop.
Regulator can also be useful where nutrient availability is present but uptake is less efficient than expected. Rather than simply increasing fertiliser concentration, its mono-silicic acid-based formulation is designed to improve the bioavailability and utilisation of the existing nutrient programme.
Aptus recommends maintaining a continuous supply because silicon deposited into plant cell membranes remains there, while newly developing cells still require an ongoing supply as the plant continues to grow.
Use 1.5ml of Aptus Regulator per 10 litres of water, equivalent to 0.15ml/L or a dilution of approximately 1:6660.
For 10L of water, use 1.5ml. For 50L, use 7.5ml. For 100L, use 15ml. For a 250L reservoir, use 37.5ml.
At the standard 0.15ml/L rate, a 50ml bottle treats approximately 333 litres of water.
Always add Regulator first. Fill the reservoir with clean water, add the measured quantity of Regulator and mix thoroughly until it is evenly dispersed. Only then add base nutrients, boosters or other compatible crop inputs.
Accurate measurement is important because Regulator is highly concentrated. For very small reservoirs, Aptus states that one drop is approximately 0.05ml. This means a 1L solution requires approximately 0.15ml, or 3 drops, at the standard rate.
Keep the concentrate clean. Do not allow water or dirt to enter the bottle and use only clean, dry syringes, pipettes or measuring equipment when dispensing Regulator.
| Product | Aptus Regulator |
|---|---|
| Product type | Nutrition manager & anti-stress plant enhancer |
| Product size | 50ml |
| Format | Highly concentrated liquid |
| Key silicon form | Mono-silicic acid |
| Other key elements | Boron (B) & molybdenum (Mo) |
| Standard application rate | 1.5ml per 10L |
| Application rate per litre | 0.15ml/L |
| Standard dilution | Approximately 1:6660 |
| Application stage | Throughout active plant development |
| 10L solution | 1.5ml |
| 50L solution | 7.5ml |
| 100L solution | 15ml |
| 250L solution | 37.5ml |
| Approximate coverage from 50ml | 333L at the standard rate |
| Small-volume measurement | Approximately 0.15ml or 3 drops per 1L |
| Mixing order | Add first to a reservoir filled with clean water, before nutrients, boosters or other compatible crop inputs |
| Primary functions | Nutrient utilisation, structural support, stress tolerance & compact plant development |
Aptus Regulator is a highly concentrated nutrition manager and anti-stress plant enhancer. It is designed to improve nutrient uptake and utilisation while supporting stronger plant structure and greater tolerance to environmental stress.
Regulator contains mono-silicic acid as its key nutrient-transport component, together with boron and molybdenum.
Regulator contains silicon in the form of mono-silicic acid, but its role extends beyond simply supplying silicon. Aptus positions it as a nutrition manager that supports nutrient uptake, plant structure and resistance to environmental stress.
Aptus describes mono-silicic acid as a nutrient transporter. It supports the absorption and utilisation of other nutrients while contributing to stronger cell structure.
Boron supports calcium uptake and stimulates the production of plant fibres, contributing to stronger structural development.
Molybdenum plays an important role in nitrogen metabolism. Aptus explains that it supports the movement of nitrogen from older lower leaves towards newer developing foliage when required.
Use 1.5ml of Regulator per 10 litres of water. This is equivalent to 0.15ml/L or approximately a 1:6660 dilution.
Use 7.5ml of Regulator for 50 litres of water at the standard application rate.
Use 15ml of Regulator for a 100L reservoir.
At the standard 0.15ml/L rate, a 50ml bottle treats approximately 333 litres.
Yes. This mixing order is important. Add Regulator to a reservoir filled with clean water first and mix thoroughly. Add the base fertiliser, boosters and other compatible products afterwards.
Yes. Aptus recommends maintaining a continuous supply of Regulator as plants develop because silicon already deposited within cell membranes remains there, while newly formed cells still require an ongoing supply.
Yes. Aptus specifically recommends Regulator to help plants cope with environmental stresses such as excessive heat. The standard application rate is suitable for this purpose.
Regulator can help where nutrients are already present but their availability or utilisation is limiting plant performance. Aptus notes that it can often help correct nutrient deficiencies by making existing nutrients more bioavailable.
Regulator can help control excessive internodal spacing and encourage more compact plant development. Aptus identifies internode management as one of the practical uses of the product.
Yes. Aptus identifies improved resistance to salinity caused by nutrient salt build-up as one of the benefits of Regulator.
Aptus states that Regulator helps reduce transpiration, which means reducing moisture loss through the leaves.
Because Regulator is extremely concentrated, use a clean, dry syringe or pipette for accurate measurement. Aptus also gives approximately 0.05ml per drop as a guide, so 1 litre of water requires around 3 drops at the standard rate.
Pay with
Your transaction is protected with advanced security measures to keep your information confidential
£8.44
Unit price per
